config.status

友善之臂SBC-2410X开发板所使用的测试程序包

      ac_dir=`(dirname "$ac_file") 2>/dev/null ||
$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	 X"$ac_file" : 'X\(//\)[^/]' \| \
	 X"$ac_file" : 'X\(//\)$' \| \
	 X"$ac_file" : 'X\(/\)' \| \
	 .     : '\(.\)' 2>/dev/null ||
echo X"$ac_file" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
  	  /^X\(\/\/\)$/{ s//\1/; q; }
  	  /^X\(\/\).*/{ s//\1/; q; }
  	  s/.*/./; q'`
      { if $as_mkdir_p; then
    mkdir -p "$ac_dir"
  else
    as_dir="$ac_dir"
    as_dirs=
    while test ! -d "$as_dir"; do
      as_dirs="$as_dir $as_dirs"
      as_dir=`(dirname "$as_dir") 2>/dev/null ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	 X"$as_dir" : 'X\(//\)[^/]' \| \
	 X"$as_dir" : 'X\(//\)$' \| \
	 X"$as_dir" : 'X\(/\)' \| \
	 .     : '\(.\)' 2>/dev/null ||
echo X"$as_dir" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
  	  /^X\(\/\/\)$/{ s//\1/; q; }
  	  /^X\(\/\).*/{ s//\1/; q; }
  	  s/.*/./; q'`
    done
    test ! -n "$as_dirs" || mkdir $as_dirs
  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
   { (exit 1); exit 1; }; }; }

      rm -f $ac_file
      mv $tmp/config.h $ac_file
    fi
  else
    cat $tmp/config.h
    rm -f $tmp/config.h
  fi
# Compute $ac_file's index in $config_headers.
_am_stamp_count=1
for _am_header in $config_headers :; do
  case $_am_header in
    $ac_file | $ac_file:* )
      break ;;
    * )
      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
  esac
done
echo "timestamp for $ac_file" >`(dirname $ac_file) 2>/dev/null ||
$as_expr X$ac_file : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	 X$ac_file : 'X\(//\)[^/]' \| \
	 X$ac_file : 'X\(//\)$' \| \
	 X$ac_file : 'X\(/\)' \| \
	 .     : '\(.\)' 2>/dev/null ||
echo X$ac_file |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
  	  /^X\(\/\/\)$/{ s//\1/; q; }
  	  /^X\(\/\).*/{ s//\1/; q; }
  	  s/.*/./; q'`/stamp-h$_am_stamp_count
done

#
# CONFIG_COMMANDS section.
#
for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue
  ac_dest=`echo "$ac_file" | sed 's,:.*,,'`
  ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'`
  ac_dir=`(dirname "$ac_dest") 2>/dev/null ||
$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	 X"$ac_dest" : 'X\(//\)[^/]' \| \
	 X"$ac_dest" : 'X\(//\)$' \| \
	 X"$ac_dest" : 'X\(/\)' \| \
	 .     : '\(.\)' 2>/dev/null ||
echo X"$ac_dest" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
  	  /^X\(\/\/\)$/{ s//\1/; q; }
  	  /^X\(\/\).*/{ s//\1/; q; }
  	  s/.*/./; q'`
  { if $as_mkdir_p; then
    mkdir -p "$ac_dir"
  else
    as_dir="$ac_dir"
    as_dirs=
    while test ! -d "$as_dir"; do
      as_dirs="$as_dir $as_dirs"
      as_dir=`(dirname "$as_dir") 2>/dev/null ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	 X"$as_dir" : 'X\(//\)[^/]' \| \
	 X"$as_dir" : 'X\(//\)$' \| \
	 X"$as_dir" : 'X\(/\)' \| \
	 .     : '\(.\)' 2>/dev/null ||
echo X"$as_dir" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
  	  /^X\(\/\/\)$/{ s//\1/; q; }
  	  /^X\(\/\).*/{ s//\1/; q; }
  	  s/.*/./; q'`
    done
    test ! -n "$as_dirs" || mkdir $as_dirs
  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
   { (exit 1); exit 1; }; }; }

  ac_builddir=.

if test "$ac_dir" != .; then
  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
  # A "../" for each directory in $ac_dir_suffix.
  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
else
  ac_dir_suffix= ac_top_builddir=
fi

case $srcdir in
  .)  # No --srcdir option.  We are building in place.
    ac_srcdir=.
    if test -z "$ac_top_builddir"; then
       ac_top_srcdir=.
    else
       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
    fi ;;
  [\\/]* | ?:[\\/]* )  # Absolute path.
    ac_srcdir=$srcdir$ac_dir_suffix;
    ac_top_srcdir=$srcdir ;;
  *) # Relative path.
    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
    ac_top_srcdir=$ac_top_builddir$srcdir ;;
esac

# Do not use `cd foo && pwd` to compute absolute paths, because
# the directories may not exist.
case `pwd` in
.) ac_abs_builddir="$ac_dir";;
*)
  case "$ac_dir" in
  .) ac_abs_builddir=`pwd`;;
  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
  *) ac_abs_builddir=`pwd`/"$ac_dir";;
  esac;;
esac
case $ac_abs_builddir in
.) ac_abs_top_builddir=${ac_top_builddir}.;;
*)
  case ${ac_top_builddir}. in
  .) ac_abs_top_builddir=$ac_abs_builddir;;
  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
  esac;;
esac
case $ac_abs_builddir in
.) ac_abs_srcdir=$ac_srcdir;;
*)
  case $ac_srcdir in
  .) ac_abs_srcdir=$ac_abs_builddir;;
  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
  esac;;
esac
case $ac_abs_builddir in
.) ac_abs_top_srcdir=$ac_top_srcdir;;
*)
  case $ac_top_srcdir in
  .) ac_abs_top_srcdir=$ac_abs_builddir;;
  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
  esac;;
esac


  { echo "$as_me:$LINENO: executing $ac_dest commands" >&5
echo "$as_me: executing $ac_dest commands" >&6;}
  case $ac_dest in
    depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
  # Strip MF so we end up with the name of the file.
  mf=`echo "$mf" | sed -e 's/:.*$//'`
  # Check whether this is an Automake generated Makefile or not.
  # We used to match only the files named `Makefile.in', but
  # some people rename them; so instead we look at the file content.
  # Grep'ing the first line is not enough: some people post-process
  # each Makefile.in and add a new line on top of each file to say so.
  # So let's grep whole file.
  if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
    dirpart=`(dirname "$mf") 2>/dev/null ||
$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	 X"$mf" : 'X\(//\)[^/]' \| \
	 X"$mf" : 'X\(//\)$' \| \
	 X"$mf" : 'X\(/\)' \| \
	 .     : '\(.\)' 2>/dev/null ||
echo X"$mf" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
  	  /^X\(\/\/\)$/{ s//\1/; q; }
  	  /^X\(\/\).*/{ s//\1/; q; }
  	  s/.*/./; q'`
  else
    continue
  fi
  grep '^DEP_FILES *= *[^ #]' < "$mf" > /dev/null || continue
  # Extract the definition of DEP_FILES from the Makefile without
  # running `make'.
  DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"`
  test -z "$DEPDIR" && continue
  # When using ansi2knr, U may be empty or an underscore; expand it
  U=`sed -n -e '/^U = / s///p' < "$mf"`
  test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR"
  # We invoke sed twice because it is the simplest approach to
  # changing $(DEPDIR) to its actual value in the expansion.
  for file in `sed -n -e '
    /^DEP_FILES = .*\\\\$/ {
      s/^DEP_FILES = //
      :loop
	s/\\\\$//
	p
	n
	/\\\\$/ b loop
      p
    }
    /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \
       sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
    # Make sure the directory exists.
    test -f "$dirpart/$file" && continue
    fdir=`(dirname "$file") 2>/dev/null ||
$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	 X"$file" : 'X\(//\)[^/]' \| \
	 X"$file" : 'X\(//\)$' \| \
	 X"$file" : 'X\(/\)' \| \
	 .     : '\(.\)' 2>/dev/null ||
echo X"$file" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
  	  /^X\(\/\/\)$/{ s//\1/; q; }
  	  /^X\(\/\).*/{ s//\1/; q; }
  	  s/.*/./; q'`
    { if $as_mkdir_p; then
    mkdir -p $dirpart/$fdir
  else
    as_dir=$dirpart/$fdir
    as_dirs=
    while test ! -d "$as_dir"; do
      as_dirs="$as_dir $as_dirs"
      as_dir=`(dirname "$as_dir") 2>/dev/null ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	 X"$as_dir" : 'X\(//\)[^/]' \| \
	 X"$as_dir" : 'X\(//\)$' \| \
	 X"$as_dir" : 'X\(/\)' \| \
	 .     : '\(.\)' 2>/dev/null ||
echo X"$as_dir" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
  	  /^X\(\/\/\)$/{ s//\1/; q; }
  	  /^X\(\/\).*/{ s//\1/; q; }
  	  s/.*/./; q'`
    done
    test ! -n "$as_dirs" || mkdir $as_dirs
  fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5
echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;}
   { (exit 1); exit 1; }; }; }

    # echo "creating $dirpart/$file"
    echo '# dummy' > "$dirpart/$file"
  done
done
 ;;
    default-1 )
    for ac_file in $CONFIG_FILES; do
      # Support "outfile[:infile[:infile...]]"
      case "$ac_file" in
        *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
      esac
      # PO directories have a Makefile.in generated from Makefile.in.in.
      case "$ac_file" in */Makefile.in)
        # Adjust a relative srcdir.
        ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
        ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`"
        ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
        # In autoconf-2.13 it is called $ac_given_srcdir.
        # In autoconf-2.50 it is called $srcdir.
        test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
        case "$ac_given_srcdir" in
          .)  top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
          /*) top_srcdir="$ac_given_srcdir" ;;
          *)  top_srcdir="$ac_dots$ac_given_srcdir" ;;
        esac
        if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then
          rm -f "$ac_dir/POTFILES"
          test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES"
          cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ 	]*\$/d" -e "s,.*,     $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES"
          POMAKEFILEDEPS="POTFILES.in"
          # ALL_LINGUAS, POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES depend
          # on $ac_dir but don't depend on user-specified configuration
          # parameters.
          if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
            # The LINGUAS file contains the set of available languages.
            if test -n "$OBSOLETE_ALL_LINGUAS"; then
              test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete"
            fi
            ALL_LINGUAS_=`sed -e "/^#/d" "$ac_given_srcdir/$ac_dir/LINGUAS"`
            # Hide the ALL_LINGUAS assigment from automake.
            eval 'ALL_LINGUAS''=$ALL_LINGUAS_'
            POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS"
          else
            # The set of available languages was given in configure.in.
            eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS'
          fi
          # Compute POFILES
          # as      $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po)
          # Compute UPDATEPOFILES
          # as      $(foreach lang, $(ALL_LINGUAS), $(lang).po-update)
          # Compute DUMMYPOFILES
          # as      $(foreach lang, $(ALL_LINGUAS), $(lang).nop)
          # Compute GMOFILES
          # as      $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo)
          case "$ac_given_srcdir" in
            .) srcdirpre= ;;
            *) srcdirpre='$(srcdir)/' ;;
          esac
          POFILES=
          UPDATEPOFILES=
          DUMMYPOFILES=
          GMOFILES=
          for lang in $ALL_LINGUAS; do
            POFILES="$POFILES $srcdirpre$lang.po"
            UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
            DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
            GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
          done
          # CATALOGS depends on both $ac_dir and the user's LINGUAS
          # environment variable.
          INST_LINGUAS=
          if test -n "$ALL_LINGUAS"; then
            for presentlang in $ALL_LINGUAS; do
              useit=no
              if test "%UNSET%" != "$LINGUAS"; then
                desiredlanguages="$LINGUAS"
              else
                desiredlanguages="$ALL_LINGUAS"
              fi
              for desiredlang in $desiredlanguages; do
                # Use the presentlang catalog if desiredlang is
                #   a. equal to presentlang, or
                #   b. a variant of presentlang (because in this case,
                #      presentlang can be used as a fallback for messages
                #      which are not translated in the desiredlang catalog).
                case "$desiredlang" in
                  "$presentlang"*) useit=yes;;
                esac
              done
              if test $useit = yes; then
                INST_LINGUAS="$INST_LINGUAS $presentlang"
              fi
            done
          fi
          CATALOGS=
          if test -n "$INST_LINGUAS"; then
            for lang in $INST_LINGUAS; do
              CATALOGS="$CATALOGS $lang.gmo"
            done
          fi
          test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile"
          sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile"
          for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do
            if test -f "$f"; then
              case "$f" in
                *.orig | *.bak | *~) ;;
                *) cat "$f" >> "$ac_dir/Makefile" ;;
              esac
            fi
          done
        fi
        ;;
      esac
    done ;;
  esac
done

{ (exit 0); exit 0; }