main.c

ST arm BOARD PWM test code

/******************** (C) COPYRIGHT 2003 STMicroelectronics ********************
* File Name          : main.c
* Author             : MCD Application Team
* Date First Issued  : 28/07/2003
* Description        : This file gives an example on the PWM generation.
*                      The device is configured to generate a PWM wave with a
*                      pulse equal to 0x30 timer clock ticks and a full period
*                      equal to 0xC0.
********************************************************************************
* History:
*  03/07/03 : First Version
*******************************************************************************/

#include "71x_lib.h"
#include "Main.h"


u32 Note = 0x800, Period;

void PlayNextTone(void)
{
	if(Period)
		Period--;
	else
	{
		TIM_PWMOModeConfig(TIM1, Note >> 1, TIM_HIGH, Note, TIM_LOW);
		Note ^= 0x1000;
		Period = 0x200;
	}
}


void __main(void)
{
#ifdef DEBUG
	debug();
#endif

	
	
	RCCU_Div2Config(ENABLE);
	RCCU_MCLKConfig(RCCU_DEFAULT);//MCLK=RCLK
	RCCU_FCLKConfig(RCCU_RCLK_2);//PCLK1(APB1)=RCLK/2
	RCCU_PCLKConfig(RCCU_RCLK_2);//PCLK2(APB2)=RCLK/2
	RCCU_RCLKSourceConfig(RCCU_CLOCK2);//RCLK=CLK2
	// at this step the PCLK2 signal should be equal to 4 MHz

	//-------------------------------------------------------------------------
	// Initialization
	//-------------------------------------------------------------------------
	// Configure the GPIO1 Port
	// Timer 1 Output Compare function pin (P1.7) configured as Alternate function pushpull
	GPIO_Config(GPIO1, 0x0080, GPIO_AF_PP);

	// Initialize the Timer
	TIM_Init(TIM1);
	// Configure the TIM Prescaler
	TIM_PrescalerConfig(TIM1, 1);		// 2 MHz
	// Enable the OverFlow Interrupt
	TIM_ITConfig(TIM1, TIM_TO_IT, ENABLE);
	

	//-------------------------------------------------------------------------
	// Configure the EIC Timer1 IRQ channel
	//-------------------------------------------------------------------------
	// Enable the IRQ0 for timer 1
	EIC_Init();
	EIC_IRQChannelConfig(T1TIMI_IRQChannel, ENABLE);
	EIC_IRQChannelPriorityConfig(T1TIMI_IRQChannel, 1);
	EIC_IRQConfig(ENABLE);
	
	TIM_CounterConfig(TIM1, TIM_START);
	
	while(1);
}