lcd - cadcam read-me.txt

包含protue 7.2 仿真文件及汇编语言源代码。主要是一个4X4的键盘以及一个LCD显示显示屏。键盘输入显示在LCD上。

LABCENTER PROTEUS TOOL INFORMATION FILE
=======================================

In case of difficulty, please e-mail [e-mail]

Tool set up for Proteus layout 'LCD.LYT'.
CADCAM generated at 17:01:43 on 2008年1月27日.

File List
---------
Top Copper              : LCD - CADCAM Top Copper.TXT
Bottom Copper           : LCD - CADCAM Bottom Copper.TXT
Top Silk Screen         : LCD - CADCAM Top Silk Screen.TXT
Bottom Solder Resist    : LCD - CADCAM Bottom Solder Resist.TXT
Top SMT Paste Mask      : LCD - CADCAM Top SMT Paste Mask.TXT
Drill                   : LCD - CADCAM Drill.TXT

Photoplotter Setup
------------------
Format: RS274X, ASCII, 2.4, imperial, absolute, eob=*, LZO
Notes:  D=Diameter, S=Side, W=Width, H=Height

D10	CIRCLE	D=12th                                      DRAW
D11	CIRCLE	D=10th                                      DRAW
D12	CIRCLE	D=50th                                      FLASH
D13	SMT	W=20th                H=30th                FLASH
D14	SQUARE	S=80th                                      FLASH
D15	CIRCLE	D=80th                                      FLASH
D16	CIRCLE	D=150th                                     FLASH
D17	SQUARE	S=50th                                      FLASH
D18	CIRCLE	D=8th                                       DRAW
D19	CIRCLE	D=70th                                      FLASH
D70	SMT	W=100th               H=100th               FLASH
D71	CIRCLE	D=100th                                     FLASH
D20	CIRCLE	D=180th                                     FLASH
D21	SMT	W=70th                H=70th                FLASH

NC Drill Setup
--------------
Format: ASCII, 2.4, imperial, absolute, eob=<CR><LF>, no zero suppression.
Notes:  Tool sizes are diameters. Layer sets are in brackets - 0=TOP, 15=BOTTOM, 1-14=INNER.

T01	20th (0-15)
T02	40th (0-15)
T03	30th (0-15)
T04	60th (0-15)


[END OF FILE]