runvalid

disksim是一个非常优秀的磁盘仿真工具

#!/bin/sh

PREFIX=../src

echo ""
echo "These results represent actual drive validation experiments"

echo ""
echo "QUANTUM_QM39100TD-SW (rms should be about 0.378)"
${PREFIX}/disksim atlas_III.parv atlas_III.outv validate atlas_III.trace 0\
&& ${PREFIX}/rms atlas_III.outv atlas_III.outv -1 -1 1

echo ""
echo "SEAGATE_ST32171W (rms should be about 0.349)"
${PREFIX}/disksim barracuda.parv barracuda.outv validate barracuda.trace 0\
&& ${PREFIX}/rms barracuda.outv barracuda.outv -1 -1 1

echo ""
echo "SEAGATE_ST34501N (rms should be about 0.318)"
${PREFIX}/disksim cheetah4LP.parv cheetah4LP.outv validate cheetah4LP.trace 0\
&& ${PREFIX}/rms cheetah4LP.outv cheetah4LP.outv -1 -1 1

echo ""
echo "SEAGATE_ST39102LW (rms should be about 0.107)"
${PREFIX}/disksim cheetah9LP.parv cheetah9LP.outv validate cheetah9LP.trace 0\
&& ${PREFIX}/rms cheetah9LP.outv cheetah9LP.outv -1 -1 1

echo ""
echo "IBM_DNES-309170W (rms should be about 0.135)"
${PREFIX}/disksim ibm18es.parv ibm18es.outv validate ibm18es.trace 0\
&& ${PREFIX}/rms ibm18es.outv ibm18es.outv -1 -1 1

echo ""
echo "QUANTUM_TORNADO (rms should be about 0.268)"
${PREFIX}/disksim atlas10k.parv atlas10k.outv validate atlas10k.trace 0\
&& ${PREFIX}/rms atlas10k.outv atlas10k.outv -1 -1 1

echo ""
echo "HP_C2247_validate (rms should be about 0.090)"
${PREFIX}/disksim hp_c2247a.parv hp_c2247a.outv validate hp_c2247a.trace 0\
&& ${PREFIX}/rms hp_c2247a.outv hp_c2247a.outv -1 -1 1

echo ""
echo "HP_C3323_validate (rms should be about 0.306)"
${PREFIX}/disksim hp_c3323a.parv hp_c3323a.outv validate hp_c3323a.trace 0\
&& ${PREFIX}/rms hp_c3323a.outv hp_c3323a.outv -1 -1 1

echo ""
echo "HP_C2490_validate (rms should be about 0.254)"
${PREFIX}/disksim hp_c2490a.parv hp_c2490a.outv validate hp_c2490a.trace 0\
&& ${PREFIX}/rms hp_c2490a.outv hp_c2490a.outv -1 -1 1

echo ""
echo "DEC_RZ26_validate (rms should be about 0.340)"
${PREFIX}/disksim dec_rz26.parv dec_rz26.outv validate dec_rz26.trace 0\
&& ${PREFIX}/rms dec_rz26.outv dec_rz26.outv -1 -1 1


echo ""
echo "The remaining tests exercise other DiskSim components"

echo ""
echo "Open synthetic workload (avg. resp. should be about 10.9ms)"
 ${PREFIX}/disksim synthopen.parv synthopen.outv ascii 0 1\
&& grep "IOdriver Response time average" synthopen.outv

echo ""
echo "Closed synthetic workload (avg. resp. should be about 87.6ms)"
 ${PREFIX}/disksim synthclosed.parv synthclosed.outv ascii 0 1\
&& grep "IOdriver Response time average" synthclosed.outv

echo ""
echo "Mixed synthetic workload (avg. resp. should be about 22.08ms)"
 ${PREFIX}/disksim synthmixed.parv synthmixed.outv ascii 0 1\
&& grep "IOdriver Response time average" synthmixed.outv

echo ""
echo "RAID 5 at device driver (avg. resp. should be about 22.8ms)"
 ${PREFIX}/disksim synthraid5.parv synthraid5.outv ascii 0 1\
&& grep "IOdriver Response time average" synthraid5.outv

echo ""
echo "Set of disk arrays at device driver (avg. resp. should be about 34.3ms)"
 ${PREFIX}/disksim syntharrays.parv syntharrays.outv ascii 0 1\
&& grep "Overall I/O System Response time average" syntharrays.outv

echo ""
echo "Memory cache at controller (avg. resp. should be about 24.6ms)"
 ${PREFIX}/disksim synthcachemem.parv synthcachemem.outv ascii 0 1\
&& grep "IOdriver Response time average" synthcachemem.outv

#echo ""
#echo "Checkpoint/restore version of cache at controller (should be same as above)"
# ${PREFIX}/disksim checkpoint.synthcachemem\
#&& grep "IOdriver Response time average" out.synthcachemem

echo ""
echo "Cache device managed at controller (avg. resp. should be about 28.9ms)"
 ${PREFIX}/disksim synthcachedev.parv synthcachedev.outv ascii 0 1\
&& grep "IOdriver Response time average" synthcachedev.outv

echo ""
echo "Simpledisk instead of original model (avg. resp. should be about 13.5ms)"
 ${PREFIX}/disksim synthsimpledisk.parv synthsimpledisk.outv ascii 0 1\
&& grep "IOdriver Response time average" synthsimpledisk.outv

#echo ""
#echo "Simpledisk together with original disk model"
#echo "(avg. resps. should be about 13.4ms, 20.3, 13.3 and 20.6)"
# ${PREFIX}/disksim par.synthmultidevice out.synthmultidevice ascii 0 1\
#&& grep "IOdriver #0 device #0 Response time average" out.synthmultidevice\
#&& grep "IOdriver #0 device #1 Response time average" out.synthmultidevice\
#&& grep "IOdriver #0 device #2 Response time average" out.synthmultidevice\
#&& grep "IOdriver #0 device #3 Response time average" out.synthmultidevice

echo "3 different disks"
echo "(avg. resps. should be about 10.937)"
${PREFIX}/disksim 3disks.parv 3disks.outv ascii 0 1\
&& grep "IOdriver Response time average" 3disks.outv\

echo "3 disks on separate controllers"
echo "(avg. resps. should be about 10.937)"
${PREFIX}/disksim 3disks2.parv 3disks2.outv ascii 0 1\
&& grep "IOdriver Response time average" 3disks2.outv\

echo ""
echo "Note: this validates HP trace input, *not* the corresponding traced disk"
echo "HP srt trace input (avg. resp should be about 48.8ms)"
 ${PREFIX}/disksim hplajw.parv hplajw.outv hpl ajw.1week.srt 0\
&& grep "IOdriver Response time average" hplajw.outv

#echo ""
#echo "Checkpoint/restore version of HP srt trace input (should be same as above)"
# ${PREFIX}/disksim checkpoint.hplajw\
#&& grep "IOdriver Response time average" out.hplajw

echo ""
echo "ASCII input (avg. resp should be about 13.8ms)"
 ${PREFIX}/disksim ascii.parv ascii.outv ascii stdin 0 < ascii.trace\
&& grep "IOdriver Response time average" ascii.outv

echo ""
echo "syssim: externally-controlled DiskSim (avg. resp should be about 8.9ms)"
${PREFIX}/syssim cheetah4LP.parv syssim.outv 2676846\
&& grep "IOdriver Response time average" syssim.outv

# echo ""
# echo "syssim2: dual externally-controlled DiskSim instances (avg. resps should same as previous and 0.0ms, respectively)"
# ${PREFIX}/syssim st41601n.parv syssim2.outv 2676846 1\
# && grep "IOdriver Response time average" syssim2.outv\
# && grep "IOdriver Response time average" syssim2.outv2

echo ""