usbfx2lk.inf

这是一个简单的usb基于WDM的驱动源码及测试应用程序。固件采用fx2构架的usb控制器。

;
; Copyright (c) 2005 OSR, Open Systems Resources All rights Reserved
;    INF file for installing OSR USB FX2 Learning Kit Test Board
;

;
; Version section
;
[Version]
Signature="$WINDOWS NT$"
;
; We'll install our device into the "USB" class of
;  devices
;
Class=USB
ClassGUID={36FC9E60-C465-11CF-8056-444553540000}
Provider=%OSRProvider%
DriverVer=01/05/2005,1

;
; Manufacturer section
;
[Manufacturer]
;
; Indicate that whatever string %ManufacturerName%
;  is defined to be in the [Strings] section is the 
;  manufacturer of our device.
;
; We need to specify separate models sections
;  for each architecture that we support, so
;  we will define an x86 models section and also
;  and AMD64 models section
;
%ManufacturerName%=OSR,NTx86,NTamd64

;
; Models section for installation on pre XP, x86 based
;  machines. We support one device type and the 
;  device is on the USB bus, has a vendor identifier
;  of 0547 and a product identifier of 1002.
;
; This section instructs the installation to move
;  on to the [USBFX2LKInst] section
;
[OSR]
%DeviceDesc%=USBFX2LKInst, USB\VID_0547&PID_1002

;
; Models section for installation on XP and later x86 
;  based machines. Syntax and effect is identical to the
;  previous installation section
;
[OSR.NTx86]
%DeviceDesc%=USBFX2LKInst, USB\VID_0547&PID_1002

;
; Models section for installation on amd64 based
;  machines. Syntax and effect is identical to the
;  previous installation sections
;
[OSR.NTamd64]
%DeviceDesc%=USBFX2LKInst, USB\VID_0547&PID_1002

;
; Installation section that is processed whenever
;  a device that matches the device IDs defined
;  in our models sections is discovered
;
[USBFX2LKInst]
;
; Indicate the location of our CopyFiles section,
;  which we have named [USBFX2CopyFiles]
;
CopyFiles=USBFX2CopyFiles

;
; DestinationDirs section. Indicates
;  where the files in the CopyFiles section
;  should be copied to on the target system.
;
; "12" is expanded by the installer to be 
;  %SystemRoot%\System32\Drivers
;
[DestinationDirs]
DefaultDestDir=12

;
; CopyFiles section, which lists all of the files that 
;  need to be copied from the installation disk to 
;  the target system
;
[USBFX2CopyFiles]
usbfx2lk.sys

;
; SourceDisksFiles section. Indicates
;  the location of the files outlined in the 
;  CopyFiles section relative to the installation
;  disk set.
;
[SourceDisksFiles]
;
; Indicate that the one file that we are copying
;  as part of this installation is on Disk 1
;
usbfx2lk.sys=1


;
; SourceDisksNames section. We chose to indicate that the 
;  files to install on x86 based systems are located in a 
;  separate directory on the installation disk than the
;  files for an AMD64 based install. To do this,
;  we decorate the required SourceDisksNames sections
;  with the target platforma and in the description
;  of the disk layout we add an appropriate subdirectory
;
[SourceDisksNames.x86]
1=%DiskDesc%,,,\i386

[SourceDisksNames.amd64]
1=%DiskDesc%,,,\amd64

;
; Services section. The name of the section
;  is created by decorating the installation section
;  name (defined in the Models section) with .Services.
;
[USBFX2LKInst.Services]
;
; We are creating one service named USBFX2LK (to match
;  our binary image name) and directing the installation
;  procedure to the USBFX2AddService for details on how
;  to create the service
;
AddService = USBFX2LK, 0x00000002, USBFX2AddService

;
; AddService section. This section is used to create
;  all of the values that will appear beneath the 
;  HKLM\System\CCS\Services\{ServiceName} key
;
[USBFX2AddService]
DisplayName    = %ServiceDesc%
ServiceType    = 1                  ; SERVICE_KERNEL_DRIVER
StartType      = 3                  ; SERVICE_DEMAND_START
ErrorControl   = 1                  ; SERVICE_ERROR_NORMAL
ServiceBinary  = %12%\USBFX2LK.sys
;
; We want to create a subkey of our services key in order
;  to save some driver specific registry data. In order to
;  create a subkey, we will need to use the AddReg directive.
;
AddReg         = USBFX2AddReg

;
; AddReg section. Indicate to the installation process that 
;  we would like to create an OsrDebugLevel value in the 
;  Parameters subkey of our Service key
;
[USBFX2AddReg]
HKR,%ParametersSubkey%,%OsrDebugLevel%,0x10001,0


;
; Strings section. Any values in the INF that have %'s
;  on either end are references to values within this
;  section. 
; 
[Strings]
OSRProvider="OSR, Open Systems Resources, Inc."
ManufacturerName="OSR, Open Systems Resources Inc."
DiskDesc="USBFX2LK Learning Kit Installation Disk"
DeviceDesc="USBFX2LK.Sys OSR, USB FX2 Learning Kit Test Board"
ServiceDesc="USBFX2LK.Sys OSR, USB FX2 Learning Kit Test Driver"
ParametersSubkey="Parameters"
OsrDebugLevel="OsrDebugLevel"