header.txt

t6963c控制液晶程序,包含完整的源程序和文档说明

      0x00,0x00,
      0x00,0x1F,0x00,0x1F,0x12,0x24,0x0F,0x02,
      0x0F,0x04,0x08,0x31,0x00,0x00,0x00,0x00,
      0x90,0xF8,0x80,0xFC,
      0x04,0x68,0x80,0x10,0xF8,0xA0,0x98,0x88,
      0x00,0x00,
//-- 统 --
      0x00,0x00,
      0x08,0x08,0x13,0x14,0x39,0x0B,0x10,0x3C,
      0x00,0x3C,0x01,0x06,0x00,0x00,0x00,0x00,
      0x80,0x40,0xFC,0x80,
      0x10,0xF8,0xA8,0xA0,0xA0,0xA4,0x24,0x1C,
      0x00,0x00,
//-- 计 --
      0x00,0x00,
      0x10,0x08,0x08,0x00,0x3B,0x08,0x08,0x08,
      0x0A,0x0C,0x08,0x00,0x00,0x00,0x00,0x00,
      0x20,0x20,0x20,0x28,
      0xFC,0x20,0x20,0x20,0x20,0x20,0x20,0x20,
      0x00,0x00,
//-- 帮 --
      0x00,0x00,
      0x04,0x1F,0x04,0x1F,0x04,0x3F,0x09,0x1F,
      0x29,0x09,0x09,0x01,0x00,0x00,0x00,0x00,
      0x78,0x48,0x50,0x48,
      0x68,0x58,0x40,0xF0,0x10,0x50,0x30,0x00,
      0x00,0x00,
//-- 助 --
      0x00,0x00,
      0x00,0x1F,0x11,0x1F,0x11,0x11,0x1F,0x11,
      0x11,0x13,0x3C,0x01,0x00,0x00,0x00,0x00,
      0x20,0x20,0x20,0xFC,
      0x24,0x24,0x24,0x24,0x24,0xA4,0x44,0x8C,
      0x00,0x00,
//-- 上 --
      0x00,0x00,
      0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,
      0x01,0x01,0x01,0x3F,0x00,0x00,0x00,0x00,
      0x00,0x00,0x00,0x10,
      0xF8,0x00,0x00,0x00,0x00,0x00,0x08,0xFC,
      0x00,0x00,
//-- 下 --
      0x00,0x00,
      0x00,0x3F,0x01,0x01,0x01,0x01,0x01,0x01,
      0x01,0x01,0x01,0x01,0x00,0x00,0x00,0x00,
      0x08,0xFC,0x00,0x00,
      0x80,0x40,0x30,0x10,0x00,0x00,0x00,0x00,
      0x00,0x00,
//-- 页 --
      0x00,0x00,
      0x00,0x3F,0x01,0x0F,0x08,0x09,0x09,0x09,
      0x09,0x02,0x04,0x38,0x00,0x00,0x00,0x00,
      0x08,0xFC,0x00,0xF0,
      0x10,0x10,0x10,0x10,0x10,0xC0,0x30,0x08,
      0x00,0x00,
//-- 确 --
      0x00,0x00,
      0x00,0x3E,0x08,0x09,0x13,0x1D,0x35,0x15,
      0x15,0x1D,0x15,0x02,0x00,0x00,0x00,0x00,
      0x40,0x78,0x90,0xFC,
      0x24,0xFC,0x24,0xFC,0x24,0x24,0x34,0x28,
      0x00,0x00,
//-- 定 --
      0x00,0x00,
      0x01,0x00,0x1F,0x10,0x2F,0x01,0x09,0x09,
      0x09,0x0D,0x13,0x20,0x00,0x00,0x00,0x00,
      0x00,0x80,0xFC,0x04,
      0xF0,0x00,0x20,0xF0,0x00,0x00,0x00,0xFC,
      0x00,0x00,
//-- 拉 --
      0x00,0x00,
      0x08,0x08,0x08,0x3E,0x08,0x0C,0x18,0x28,
      0x08,0x08,0x2B,0x10,0x00,0x00,0x00,0x00,
      0x40,0x20,0x00,0xFC,
      0x00,0x88,0x90,0x50,0x50,0x20,0xFC,0x00,
      0x00,0x00,
//-- 速 --
      0x00,0x00,
      0x00,0x13,0x08,0x0B,0x02,0x3B,0x0A,0x08,
      0x09,0x0A,0x14,0x23,0x00,0x00,0x00,0x00,
      0x48,0xFC,0x40,0xF8,
      0x48,0xF8,0x48,0xE0,0x50,0x48,0x40,0xFC,
      0x00,0x00,
//-- 返 --
      0x00,0x00,
      0x10,0x09,0x09,0x01,0x01,0x39,0x09,0x0A,
      0x0C,0x09,0x14,0x23,0x00,0x00,0x00,0x00,
      0x38,0xC0,0x00,0xF8,
      0x08,0x90,0x50,0x20,0x50,0x88,0x00,0xFC,
      0x00,0x00,
//-- 隔 --
      0x00,0x00,
      0x00,0x3F,0x24,0x29,0x31,0x2B,0x26,0x36,
      0x2B,0x22,0x22,0x22,0x00,0x00,0x00,0x00,
      0x08,0xFC,0x00,0xF0,
      0x10,0xFC,0x04,0xA4,0xFC,0x44,0x44,0x08,
      0x00,0x00,
//-- 距 --
      0x00,0x00,
      0x00,0x1E,0x12,0x12,0x1E,0x04,0x16,0x14,
      0x14,0x16,0x39,0x00,0x00,0x00,0x00,0x00,
      0x08,0xFC,0x80,0x80,
      0xF8,0x88,0x88,0xF8,0x80,0x88,0xFC,0x80,
      0x00,0x00,
//-- 样 --
      0x00,0x00,
      0x09,0x08,0x0B,0x3E,0x08,0x19,0x2C,0x28,
      0x0B,0x08,0x08,0x08,0x00,0x00,0x00,0x00,
      0x10,0xA0,0xF8,0x40,
      0x40,0xF8,0x40,0x48,0xFC,0x40,0x40,0x40,
      0x00,0x00,
//-- 宽 --
      0x00,0x00,
      0x00,0x3F,0x22,0x1F,0x02,0x07,0x04,0x05,
      0x05,0x02,0x0C,0x30,0x00,0x00,0x00,0x00,
      0x80,0xFC,0x44,0xF8,
      0x40,0xF0,0x10,0x10,0x50,0x44,0x44,0x3C,
      0x00,0x00,
//-- 度 --
      0x00,0x00,
      0x00,0x0F,0x09,0x0F,0x09,0x09,0x08,0x0B,
      0x09,0x10,0x23,0x2C,0x00,0x00,0x00,0x00,
      0x80,0xF8,0x20,0xF8,
      0x20,0xE0,0x00,0xE0,0x40,0x80,0x60,0x1C,
      0x00,0x00,
//-- 次 --
      0x00,0x00,
      0x01,0x21,0x11,0x12,0x0A,0x08,0x10,0x30,
      0x10,0x11,0x12,0x0C,0x00,0x00,0x00,0x00,
      0x00,0x00,0xF8,0x08,
      0x50,0x40,0x40,0xA0,0xA0,0x10,0x08,0x04,
      0x00,0x00,
//-- 数 --
      0x00,0x00,
      0x25,0x16,0x3F,0x0C,0x16,0x24,0x08,0x3F,
      0x12,0x0C,0x0A,0x31,0x00,0x00,0x00,0x00,
      0x20,0x20,0x7C,0x48,
      0x88,0x10,0x50,0x50,0x20,0x20,0x50,0x8C,
      0x00,0x00,
//-- 测 --
      0x00,0x00,
      0x20,0x17,0x04,0x25,0x15,0x0D,0x15,0x35,
      0x11,0x12,0x14,0x18,0x00,0x00,0x00,0x00,
      0x44,0xE4,0x54,0x54,
      0x54,0x54,0x54,0x54,0x14,0x84,0x54,0x08,
      0x00,0x00,
//-- 力 --
      0x00,0x00,
      0x01,0x01,0x01,0x1F,0x01,0x01,0x01,0x01,
      0x02,0x04,0x08,0x30,0x00,0x00,0x00,0x00,
      0x00,0x00,0x08,0xFC,
      0x08,0x08,0x08,0x08,0x08,0x08,0x50,0x20,
      0x00,0x00,
//-- 量 --
      0x00,0x00,
      0x0F,0x09,0x08,0x3F,0x00,0x0F,0x09,0x0F,
      0x09,0x0F,0x01,0x3F,0x00,0x00,0x00,0x00,
      0xF0,0x10,0x90,0xFC,
      0x00,0xF0,0x10,0xF0,0x10,0xF0,0x00,0xFC,
      0x00,0x00,
//-- 程 --
      0x00,0x00,
      0x06,0x38,0x08,0x3E,0x08,0x19,0x1C,0x2A,
      0x28,0x08,0x08,0x0B,0x00,0x00,0x00,0x00,
      0xF8,0x88,0x88,0xF8,
      0x00,0xFC,0x20,0x20,0xF8,0x20,0x28,0xFC,
      0x00,0x00,
//-- 强 --
      0x00,0x00,
      0x3D,0x05,0x05,0x3D,0x20,0x21,0x3D,0x05,
      0x05,0x04,0x2B,0x10,0x00,0x00,0x00,0x00,
      0xF8,0x08,0x08,0xF8,
      0x40,0xF8,0x48,0xF8,0x40,0x48,0xFC,0x04,
      0x00,0x00,
//-- 伸 --
      0x00,0x00,
      0x04,0x04,0x09,0x09,0x19,0x29,0x09,0x09,
      0x09,0x08,0x08,0x08,0x00,0x00,0x00,0x00,
      0x20,0x20,0xFC,0x24,
      0x24,0xFC,0x24,0xFC,0x24,0x20,0x20,0x20,
      0x00,0x00,
//-- 长 --
      0x00,0x00,
      0x04,0x04,0x04,0x05,0x06,0x3F,0x05,0x04,
      0x04,0x04,0x07,0x04,0x00,0x00,0x00,0x00,
      0x10,0x20,0x40,0x80,
      0x08,0xFC,0x00,0x80,0x40,0x20,0x1C,0x00,
      0x00,0x00,
//-- 时 --
      0x00,0x00,
      0x00,0x00,0x3E,0x23,0x22,0x3E,0x22,0x22,
      0x3E,0x22,0x00,0x00,0x00,0x00,0x00,0x00,
      0x10,0x10,0x10,0xFC,
      0x10,0x90,0x50,0x50,0x10,0x10,0x50,0x30,
      0x00,0x00,
//-- 间 --
      0x00,0x00,
      0x08,0x05,0x10,0x13,0x12,0x13,0x12,0x12,
      0x13,0x12,0x10,0x10,0x00,0x00,0x00,0x00,
      0x08,0xFC,0x08,0xC8,
      0x48,0xC8,0x48,0x48,0xC8,0x08,0x28,0x18,
      0x00,0x00,
//-- 断 --
      0x00,0x00,
      0x02,0x12,0x17,0x12,0x1F,0x12,0x17,0x1A,
      0x12,0x10,0x1F,0x01,0x00,0x00,0x00,0x00,
      0x0C,0x70,0x40,0x40,
      0xFC,0x48,0x48,0xC8,0x48,0x48,0x88,0x08,
      0x00,0x00,
//-- 裂 --
      0x00,0x00,
      0x1F,0x04,0x0F,0x19,0x06,0x09,0x3F,0x03,
      0x06,0x0A,0x33,0x02,0x00,0x00,0x00,0x00,
      0x88,0x28,0x28,0x28,
      0x28,0x08,0xFC,0x10,0xA0,0x40,0x30,0x0C,
      0x00,0x00,
//-- 率 --
      0x00,0x00,
      0x00,0x3F,0x01,0x12,0x0B,0x05,0x1B,0x20,
      0x00,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,
      0x80,0xFC,0x08,0x50,
      0xA0,0x50,0xE8,0x84,0x80,0xFC,0x80,0x80,
      0x00,0x00,
//-- 最 --
      0x00,0x00,
      0x07,0x04,0x07,0x04,0x3F,0x09,0x0F,0x09,
      0x0F,0x09,0x3F,0x01,0x00,0x00,0x00,0x00,
      0xF0,0x10,0xF0,0x10,
      0xFC,0x00,0xF8,0x48,0x50,0x20,0x50,0x8C,
      0x00,0x00,
//-- 大 --
      0x00,0x00,
      0x01,0x01,0x01,0x3F,0x01,0x01,0x01,0x02,
      0x02,0x04,0x08,0x30,0x00,0x00,0x00,0x00,
      0x00,0x00,0x08,0xFC,
      0x00,0x00,0x00,0x80,0x40,0x20,0x1C,0x08,
      0x00,0x00,
//-- 小 --
      0x00,0x00,
      0x00,0x00,0x00,0x04,0x04,0x04,0x08,0x10,
      0x20,0x00,0x02,0x01,0x00,0x00,0x00,0x00,
      0x80,0x80,0x80,0xA0,
      0x90,0x88,0x88,0x84,0x84,0x80,0x80,0x80,
      0x00,0x00,
//-- 平 --
      0x00,0x00,
      0x00,0x1F,0x01,0x09,0x05,0x05,0x3F,0x01,
      0x01,0x01,0x01,0x01,0x00,0x00,0x00,0x00,
      0x10,0xF8,0x20,0x20,
      0x40,0x08,0xFC,0x00,0x00,0x00,0x00,0x00,
      0x00,0x00,
//-- 均 --
      0x00,0x00,
      0x08,0x08,0x08,0x3E,0x09,0x0A,0x08,0x08,
      0x0E,0x30,0x00,0x00,0x00,0x00,0x00,0x00,
      0x40,0x40,0xFC,0x84,
      0x04,0x64,0x04,0x34,0xC4,0x04,0x28,0x10,
      0x00,0x00,
//-- 回 --
      0x00,0x00,
      0x00,0x1F,0x10,0x13,0x12,0x12,0x12,0x13,
      0x10,0x10,0x1F,0x10,0x00,0x00,0x00,0x00,
      0x08,0xFC,0x08,0xC8,
      0x48,0x48,0x48,0xC8,0x08,0x08,0xF8,0x08,
      0x00,0x00,
//-- 第 --
      0x00,0x00,
      0x08,0x0F,0x14,0x2F,0x01,0x1F,0x11,0x1F,
      0x03,0x05,0x09,0x31,0x00,0x00,0x00,0x00,
      0x40,0x7C,0xA0,0xF0,
      0x10,0xF0,0x00,0xF8,0x08,0x28,0x10,0x00,
      0x00,0x00,
//-- 去 --
      0x00,0x00,
      0x00,0x00,0x00,0x0F,0x00,0x00,0x3F,0x01,
      0x02,0x04,0x0F,0x00,0x00,0x00,0x00,0x00,
      0x80,0x80,0x90,0xF8,
      0x80,0x88,0xFC,0x00,0x20,0x10,0xF8,0x08,
      0x00,0x00,
//-- 皮 --
      0x00,0x00,
      0x00,0x00,0x0F,0x08,0x08,0x0F,0x0A,0x0A,
      0x09,0x10,0x13,0x2C,0x00,0x00,0x00,0x00,
      0x80,0x80,0xFC,0x88,
      0x80,0xF0,0x20,0x20,0x40,0x80,0x60,0x1C,
      0x00,0x00,
//-- 剔 --
      0x00,0x00,
      0x1F,0x11,0x1F,0x11,0x1F,0x08,0x1F,0x2A,
      0x12,0x24,0x0A,0x31,0x00,0x00,0x00,0x00,
      0x04,0x04,0x24,0x24,
      0x24,0x24,0xA4,0xA4,0x84,0x84,0x94,0x08,
      0x00,0x00,
//-- 除 --
      0x00,0x00,
      0x00,0x3C,0x24,0x29,0x33,0x28,0x27,0x34,
      0x2D,0x22,0x24,0x20,0x00,0x00,0x00,0x00,
      0x40,0xA0,0x90,0x0C,
      0xF0,0x40,0xFC,0x40,0x50,0x48,0xC4,0x40,
      0x00,0x00,
//-- 中 --
      0x00,0x00,
      0x00,0x00,0x00,0x1F,0x10,0x10,0x1F,0x10,
      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
      0x80,0x80,0x88,0xFC,
      0x88,0x88,0xF8,0x88,0x80,0x80,0x80,0x80,
      0x00,0x00,
//-- 当 --
      0x00,0x00,
      0x01,0x01,0x09,0x05,0x01,0x1F,0x00,0x0F,
      0x00,0x00,0x1F,0x00,0x00,0x00,0x00,0x00,
      0x00,0x10,0x10,0x20,
      0x48,0xFC,0x08,0xF8,0x08,0x08,0xF8,0x08,
      0x00,0x00,
//-- 前 --
      0x00,0x00,
      0x04,0x02,0x3F,0x00,0x1F,0x11,0x1F,0x11,
      0x1F,0x11,0x11,0x13,0x00,0x00,0x00,0x00,
      0x20,0x48,0xFC,0x00,
      0x48,0x48,0x48,0x48,0x48,0x48,0x28,0x10,
      0x00,0x00,
//--PC图标--
      0x00,0xF9,0x8A,0xFA,0x8A,0xFA,0x8A,0x8A,
      0x89,0x88,0x8F,0x8E,0x8F,0x8D,0xFF,0x00,
      0x00,0xFC,0x02,0xFA,0x8A,0x8A,0xFA,0x02,
      0xFC,0xF8,0xFF,0xAB,0xFF,0x55,0xFF,0x00,
//联机图标
      0x00,0x0F,0x10,0x13,0x13,0x13,0x10,0x0F,
      0x7F,0x40,0x40,0x41,0x40,0x40,0x7F,0x00,
      0x00,0xF0,0x08,0xE8,0xE8,0xE8,0x08,0xF0,
      0xFE,0x02,0x62,0xFA,0x62,0x02,0xFE,0x00
};

    unsigned char code  * ASCII_SUB_INDEX;   // = ASCII_SUB_INDEX_X[0];
    unsigned char code * HZ_SUB_INDEX;      //= HZ_SUB_INDEX_X[0];


    #else
       extern  unsigned char code * ASCII_SUB_INDEX;
       extern  unsigned char code * HZ_SUB_INDEX;
       extern void lcm_init(void);
       extern void fill_CGRAM(void);
       extern void negative_showchar(uchar col,uchar row,uchar n,bit attribute);
       extern void showchar(uchar col,uchar row,uchar *chp);
       extern void line( unsigned char y1,unsigned char x1, unsigned char y2, unsigned char x2, bit Mode);
       extern void Clr_char_Scr(void);
       code unsigned char *code ASCII_SUB_INDEX_X[]=
       {
        " -.0123456789BCGYV",
        " 0123456789minNS/%CV.",
        ""};
       code unsigned char *code HZ_SUB_INDEX_X[]=
       {
        "电子织物强力机常一纺仪话新试验续前刘玉宏联",
        "设置试验检索统计帮助上下页确定拉速返隔距样宽\
度次数测力量程强伸长时间断裂率最大小平均回\
第去皮剔除中当前联",
        ""};
    #endif


#endif

 

使用方法

 

ASCII_SUB_INDEX = ASCII_SUB_INDEX_X[0];
    HZ_SUB_INDEX = HZ_SUB_INDEX_X[0];
    fill_CGRAM();//填充CGRAM数据

        showchar(64,32,"电子织物强力机");//显示菜单内容