mft.h

motorola jw32 usb 源码

 #ifndef MFTDEF
 #define MFTDEF
/*
 * Clock frequency value.
 * This value is used to calculate Tick Counter value
 */

#define 	CLOCK_FREQ                      (8000000)      // 8mHz
#define 	TICKS_PER_SECOND                (1000)         //8000us/tick
#define 	TICK_PRESCALE_VALUE             (8)
#define  	aBaseSlotDuration              	(1)            //tick=2000us
//MAC PIB attributes (Table 71 IEEE 802.15.4)
#define 	APP_DATA_LENGTH                 16
//MAC constants (Table 70 IEEE 802.15.4)
#define  	TICK_4SECOND             4000
#define  	RAMSIZE                  255
#define  	PAGESIZE                  510
//#define  	MOUSEKEYSIZE             	160
//#define  	JOYSTICKDATASIZE           90  //PAGESIZE-MOUSEKEYSIZE

//#define 	DATASIZE                  14               //should change,head 4+data 10(5*2)(5 key*(1mode+1data))
#define  	DATA_HEAD           			4

//#define   KEYDATASIZE        	    (3)//FIVE KEY *12=60 BYTE.LESS THAN DATASIZE =64

#define   KBDATAEND   	      		0xFF                 //usb key map data end
//#define   USBDATALENGTH   	   		12                 //usb receive valid data length
#define   USBRELENTH   	       		8                 //usb receive  data  buffer length
//----------------------------------------------------------------
#pragma  	DATA_SEG MY_RAM
					unsigned char Ram_Key[RAMSIZE];
				//	unsigned char JkRam_Key[JOYSTICKDATASIZE];
#pragma  	DATA_SEG DEFAULT
#define  	Ram_Buffer                Ram_Key+DATA_HEAD;//
//---------------------------------------------------------------
// Uncomment one of the below to describe this node's functionality.
// RFD's are not capable of being a coordinator or router, so do not
// uncomment them.
//-----------------------------------------------------------
#define I_AM_COORDINATOR
//#define I_AM_END_DEVICE

#if defined(I_AM_COORDINATOR)
	#define I_AM_FFD
#else
	#define I_AM_RFD
	//#define   I_AM_MICROPHONE       //need GTS
	#define   I_AM_MICE       //
	//#define   I_AM_JOYSTICK0      //
	//#define   I_AM_JOYSTICK1      //
	//#define   I_AM_KEYBOARD      //
#endif
//------------------------------------------------------------
#define FIRSTCHAN 71
//check that a device type is chosen
#if !defined(I_AM_COORDINATOR)&& !defined(I_AM_END_DEVICE)
	#error "device must be defined as a coordinator, router, or end device."
#endif
//check that exactly one functional level is selected
#if !defined(I_AM_FFD) && !defined (I_AM_RFD)
	#error "device must be defined as either a RFD or FFD."
#endif
#if defined(I_AM_RFD) && defined(I_AM_FFD)
	#error "device is define both as a RFD and as a FFD in Zigbee.def."
#endif

//check for illegal RFD device types
#if defined(I_AM_COORDINATOR) && defined(I_AM_RFD)
    #error "A RFD can not be a coordinator."
#endif


// Uncomment one of the below to specifiy frequency band of operation.
// You may instead define this parameter as a project wide build
// option macro.
    //#define MY_FREQ_BAND_IS_868_MHZ
    //#define MY_FREQ_BAND_IS_900_MHZ
#define MY_FREQ_BAND_IS_2400_MHZ

// Number of times a frame should be retried before declaring error
#define MAC_MAX_FRAME_RETRIES           (4)

// Amount of time we should do active scan.
#define MAC_ACTIVE_SCAN_PERIOD          (34)

#define  MAC_RESPONSE_WAIT_TIME          20
#define 	TICKS_Half_SECOND                (500)   
#define  MAC_ACK_WAIT_TIME               (6)
#endif