rfc1213-mib

opennms得相关源码 请大家看看

		DESCRIPTION
			"The number of ICMP Timestamp Reply messages
			sent."
	::= { icmp 24 }

	-- 1.3.6.1.2.1.5.25
	icmpOutAddrMasks OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of ICMP Address Mask Request messages
			sent."
	::= { icmp 25 }

	-- 1.3.6.1.2.1.5.26
	icmpOutAddrMaskReps OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of ICMP Address Mask Reply messages
			sent."
	::= { icmp 26 }

	-- 1.3.6.1.2.1.6
	tcp OBJECT IDENTIFIER ::= { mib-2 6 }

	-- 1.3.6.1.2.1.6.1
	tcpRtoAlgorithm OBJECT-TYPE
		SYNTAX INTEGER
		{
			other(1),
			constant(2),
			rsre(3),
			vanj(4)
		}
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The algorithm used to determine the timeout value
			used for retransmitting unacknowledged octets."
	::= { tcp 1 }

	-- 1.3.6.1.2.1.6.2
	tcpRtoMin OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The minimum value permitted by a TCP
			implementation for the retransmission timeout,
			measured in milliseconds.  More refined semantics
			for objects of this type depend upon the algorithm
			used to determine the retransmission timeout.  In
			particular, when the timeout algorithm is rsre(3),
			an object of this type has the semantics of the
			LBOUND quantity described in RFC 793."
	::= { tcp 2 }

	-- 1.3.6.1.2.1.6.3
	tcpRtoMax OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The maximum value permitted by a TCP
			implementation for the retransmission timeout,
			measured in milliseconds.  More refined semantics
			for objects of this type depend upon the algorithm
			used to determine the retransmission timeout.  In
			particular, when the timeout algorithm is rsre(3),
			an object of this type has the semantics of the
			UBOUND quantity described in RFC 793."
	::= { tcp 3 }

	-- 1.3.6.1.2.1.6.4
	tcpMaxConn OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The limit on the total number of TCP connections
			the entity can support.  In entities where the
			maximum number of connections is dynamic, this
			object should contain the value -1."
	::= { tcp 4 }

	-- 1.3.6.1.2.1.6.5
	tcpActiveOpens OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of times TCP connections have made a
			direct transition to the SYN-SENT state from the
			CLOSED state."
	::= { tcp 5 }

	-- 1.3.6.1.2.1.6.6
	tcpPassiveOpens OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of times TCP connections have made a
			direct transition to the SYN-RCVD state from the
			LISTEN state."
	::= { tcp 6 }

	-- 1.3.6.1.2.1.6.7
	tcpAttemptFails OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of times TCP connections have made a
			direct transition to the CLOSED state from either
			the SYN-SENT state or the SYN-RCVD state, plus the
			number of times TCP connections have made a direct
			transition to the LISTEN state from the SYN-RCVD
			state."
	::= { tcp 7 }

	-- 1.3.6.1.2.1.6.8
	tcpEstabResets OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of times TCP connections have made a
			direct transition to the CLOSED state from either
			the ESTABLISHED state or the CLOSE-WAIT state."
	::= { tcp 8 }

	-- 1.3.6.1.2.1.6.9
	tcpCurrEstab OBJECT-TYPE
		SYNTAX Gauge
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of TCP connections for which the
			current state is either ESTABLISHED or CLOSE-
			WAIT."
	::= { tcp 9 }

	-- 1.3.6.1.2.1.6.10
	tcpInSegs OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of segments received, including
			those received in error.  This count includes
			segments received on currently established
			connections."
	::= { tcp 10 }

	-- 1.3.6.1.2.1.6.11
	tcpOutSegs OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of segments sent, including
			those on current connections but excluding those
			containing only retransmitted octets."
	::= { tcp 11 }

	-- 1.3.6.1.2.1.6.12
	tcpRetransSegs OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of segments retransmitted - that
			is, the number of TCP segments transmitted
			containing one or more previously transmitted
			octets."
	::= { tcp 12 }

	-- 1.3.6.1.2.1.6.13
	tcpConnTable OBJECT-TYPE
		SYNTAX SEQUENCE OF TcpConnEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"A table containing TCP connection-specific
			information."
	::= { tcp 13 }

	-- 1.3.6.1.2.1.6.13.1
	tcpConnEntry OBJECT-TYPE
		SYNTAX TcpConnEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"Information about a particular current TCP
			connection.  An object of this type is transient,
			in that it ceases to exist when (or soon after)
			the connection makes the transition to the CLOSED
			state."
		INDEX { tcpConnLocalAddress, tcpConnLocalPort, tcpConnRemAddress, 
		tcpConnRemPort } 
	::= { tcpConnTable 1 }


	TcpConnEntry ::= SEQUENCE
		{
		tcpConnState INTEGER,
		tcpConnLocalAddress IpAddress,
		tcpConnLocalPort INTEGER,
		tcpConnRemAddress IpAddress,
		tcpConnRemPort INTEGER
		}

	-- 1.3.6.1.2.1.6.13.1.1
	tcpConnState OBJECT-TYPE
		SYNTAX INTEGER
		{
			closed(1),
			listen(2),
			synSent(3),
			synReceived(4),
			established(5),
			finWait1(6),
			finWait2(7),
			closeWait(8),
			lastAck(9),
			closing(10),
			timeWait(11),
			deleteTCB(12)
		}
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The state of this TCP connection.
			
			The only value which may be set by a management
			station is deleteTCB(12).  Accordingly, it is
			appropriate for an agent to return a `badValue'
			response if a management station attempts to set
			this object to any other value.
			
			If a management station sets this object to the
			value deleteTCB(12), then this has the effect of
			deleting the TCB (as defined in RFC 793) of the
			corresponding connection on the managed node,
			resulting in immediate termination of the
			connection.
			
			As an implementation-specific option, a RST
			segment may be sent from the managed node to the
			other TCP endpoint (note however that RST segments
			are not sent reliably)."
	::= { tcpConnEntry 1 }

	-- 1.3.6.1.2.1.6.13.1.2
	tcpConnLocalAddress OBJECT-TYPE
		SYNTAX IpAddress
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The local IP address for this TCP connection.  In
			the case of a connection in the listen state which
			is willing to accept connections for any IP
			interface associated with the node, the value
			0.0.0.0 is used."
	::= { tcpConnEntry 2 }

	-- 1.3.6.1.2.1.6.13.1.3
	tcpConnLocalPort OBJECT-TYPE
		SYNTAX INTEGER (0..65535)
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The local port number for this TCP connection."
	::= { tcpConnEntry 3 }

	-- 1.3.6.1.2.1.6.13.1.4
	tcpConnRemAddress OBJECT-TYPE
		SYNTAX IpAddress
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The remote IP address for this TCP connection."
	::= { tcpConnEntry 4 }

	-- 1.3.6.1.2.1.6.13.1.5
	tcpConnRemPort OBJECT-TYPE
		SYNTAX INTEGER (0..65535)
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The remote port number for this TCP connection."
	::= { tcpConnEntry 5 }

	-- 1.3.6.1.2.1.6.14
	tcpInErrs OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of segments received in error
			(e.g., bad TCP checksums)."
	::= { tcp 14 }

	-- 1.3.6.1.2.1.6.15
	tcpOutRsts OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of TCP segments sent containing the
			RST flag."
	::= { tcp 15 }

	-- 1.3.6.1.2.1.7
	udp OBJECT IDENTIFIER ::= { mib-2 7 }

	-- 1.3.6.1.2.1.7.1
	udpInDatagrams OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of UDP datagrams delivered to
			UDP users."
	::= { udp 1 }

	-- 1.3.6.1.2.1.7.2
	udpNoPorts OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of received UDP datagrams for
			which there was no application at the destination
			port."
	::= { udp 2 }

	-- 1.3.6.1.2.1.7.3
	udpInErrors OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of received UDP datagrams that could
			not be delivered for reasons other than the lack
			of an application at the destination port."
	::= { udp 3 }

	-- 1.3.6.1.2.1.7.4
	udpOutDatagrams OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of UDP datagrams sent from this
			entity."
	::= { udp 4 }

	-- 1.3.6.1.2.1.7.5
	udpTable OBJECT-TYPE
		SYNTAX SEQUENCE OF UdpEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"A table containing UDP listener information."
	::= { udp 5 }

	-- 1.3.6.1.2.1.7.5.1
	udpEntry OBJECT-TYPE
		SYNTAX UdpEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"Information about a particular current UDP
			listener."
		INDEX { udpLocalAddress, udpLocalPort } 
	::= { udpTable 1 }


	UdpEntry ::= SEQUENCE
		{
		udpLocalAddress IpAddress,
		udpLocalPort INTEGER
		}

	-- 1.3.6.1.2.1.7.5.1.1
	udpLocalAddress OBJECT-TYPE
		SYNTAX IpAddress
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The local IP address for this UDP listener.  In
			the case of a UDP listener which is willing to
			accept datagrams for any IP interface associated
			with the node, the value 0.0.0.0 is used."
	::= { udpEntry 1 }

	-- 1.3.6.1.2.1.7.5.1.2
	udpLocalPort OBJECT-TYPE
		SYNTAX INTEGER (0..65535)
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The local port number for this UDP listener."
	::= { udpEntry 2 }

	-- 1.3.6.1.2.1.8
	egp OBJECT IDENTIFIER ::= { mib-2 8 }

	-- 1.3.6.1.2.1.8.1
	egpInMsgs OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of EGP messages received without
			error."
	::= { egp 1 }

	-- 1.3.6.1.2.1.8.2
	egpInErrors OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of EGP messages received that proved
			to be in error."
	::= { egp 2 }

	-- 1.3.6.1.2.1.8.3
	egpOutMsgs OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of locally generated EGP
			messages."
	::= { egp 3 }

	-- 1.3.6.1.2.1.8.4
	egpOutErrors OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of locally generated EGP messages not
			sent due to resource limitations within an EGP
			entity."
	::= { egp 4 }

	-- 1.3.6.1.2.1.8.5
	egpNeighTable OBJECT-TYPE
		SYNTAX SEQUENCE OF EgpNeighEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"The EGP neighbor table."
	::= { egp 5 }

	-- 1.3.6.1.2.1.8.5.1
	egpNeighEntry OBJECT-TYPE
		SYNTAX EgpNeighEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"Information about this entity's relationship with
			a particular EGP neighbor."
		INDEX { egpNeighAddr } 
	::= { egpNeighTable 1 }


	EgpNeighEntry ::= SEQUENCE
		{
		egpNeighState INTEGER,
		egpNeighAddr IpAddress,
		egpNeighAs INTEGER,
		egpNeighInMsgs Counter,
		egpNeighInErrs Counter,
		egpNeighOutMsgs Counter,
		egpNeighOutErrs Counter,
		egpNeighInErrMsgs Counter,
		egpNeighOutErrMsgs Counter,
		egpNeighStateUps Counter,
		egpNeighStateDowns Counter,
		egpNeighIntervalHello INTEGER,
		egpNeighIntervalPoll INTEGER,
		egpNeighMode INTEGER,
		egpNeighEventTrigger INTEGER
		}

	-- 1.3.6.1.2.1.8.5.1.1
	egpNeighState OBJECT-TYPE
		SYNTAX INTEGER
		{
			idle(1),
			acquisition(2),
			down(3),
			up(4),
			cease(5)
		}
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The EGP state of the local system with respect to
			this entry's EGP neighbor.  Each EGP state is
			represented by a value that is one greater than
			the numerical value associated with said state in
			RFC 904."
	::= { egpNeighEntry 1 }

	-- 1.3.6.1.2.1.8.5.1.2
	egpNeighAddr OBJECT-TYPE