rfc1315.mib

opennms得相关源码 请大家看看

             STATUS   mandatory
             DESCRIPTION
                "The Data Link Connection Identifier  for  this
                virtual circuit."
            REFERENCE
               "Draft American National  Standard  T1.618-1991,
               Section 3.3.6"
           ::= { frCircuitEntry 2 }


         frCircuitState OBJECT-TYPE
             SYNTAX   INTEGER {
                         invalid (1),
                         active (2),
                         inactive (3)
                      }
             ACCESS   read-write
             STATUS   mandatory
             DESCRIPTION
                "Indicates whether the particular virtual  cir-
                cuit  is operational.  In the absence of a Data
                Link Connection Management  Interface,  virtual
                circuit  entries  (rows) may be created by set-
                ting virtual  circuit  state  to  'active',  or
                deleted by changing Circuit state to 'invalid'.
                Whether or not the row actually  disappears  is
                left  to the implementation, so this object may
                actually read as 'invalid' for  some  arbitrary
                length  of  time.   It is also legal to set the
                state of a virtual  circuit  to  'inactive'  to
                temporarily disable a given circuit."
            DEFVAL { active }
            ::= { frCircuitEntry 3 }


         frCircuitReceivedFECNs OBJECT-TYPE
             SYNTAX   Counter
             ACCESS   read-only
             STATUS   mandatory
             DESCRIPTION
                "Number of frames received from the network in-
                dicating  forward  congestion since the virtual
                circuit was created."
            REFERENCE
               "Draft American National  Standard  T1.618-1991,
               Section 3.3.3"
           ::= { frCircuitEntry 4 }



         frCircuitReceivedBECNs OBJECT-TYPE
             SYNTAX   Counter
             ACCESS   read-only
             STATUS   mandatory
             DESCRIPTION
                "Number of frames received from the network in-
                dicating  backward congestion since the virtual
                circuit was created."
            REFERENCE
               "Draft American National  Standard  T1.618-1991,
               Section 3.3.4"
           ::= { frCircuitEntry 5 }



         frCircuitSentFrames OBJECT-TYPE
             SYNTAX   Counter
             ACCESS   read-only
             STATUS   mandatory
             DESCRIPTION
                "The number of frames sent  from  this  virtual
                circuit since it was created."
            ::= { frCircuitEntry 6 }



         frCircuitSentOctets OBJECT-TYPE
             SYNTAX   Counter
             ACCESS   read-only
             STATUS   mandatory
             DESCRIPTION
                "The number of octets sent  from  this  virtual
                circuit since it was created."
            ::= { frCircuitEntry 7 }



         frCircuitReceivedFrames OBJECT-TYPE
             SYNTAX   Counter
             ACCESS   read-only
             STATUS   mandatory
             DESCRIPTION
                "Number of frames received  over  this  virtual
                circuit since it was created."
            ::= { frCircuitEntry 8 }



         frCircuitReceivedOctets OBJECT-TYPE
             SYNTAX   Counter
             ACCESS   read-only
             STATUS   mandatory
             DESCRIPTION
                "Number of octets received  over  this  virtual
                circuit since it was created."
            ::= { frCircuitEntry 9 }


         frCircuitCreationTime OBJECT-TYPE
             SYNTAX   TimeTicks
             ACCESS   read-only
             STATUS   mandatory
             DESCRIPTION
                "The value of sysUpTime when the  virtual  cir-
                cuit was created, whether by the Data Link Con-
                nection Management Interface  or  by  a  SetRe-
                quest."
            ::= { frCircuitEntry 10 }



         frCircuitLastTimeChange OBJECT-TYPE
             SYNTAX   TimeTicks
             ACCESS   read-only
             STATUS   mandatory
             DESCRIPTION
                "The value of sysUpTime when last there  was  a
                change in the virtual circuit state"
            ::= { frCircuitEntry 11 }



         frCircuitCommittedBurst OBJECT-TYPE
             SYNTAX   INTEGER
             ACCESS   read-write
             STATUS   mandatory
             DESCRIPTION
                "This variable indicates the maximum amount  of
                data,  in  bits,  that  the  network  agrees to
                transfer under normal  conditions,  during  the
                measurement interval."
            REFERENCE
               "Draft American National  Standard  T1.617-1991,
               Section 6.5.19"
           DEFVAL   { 0 }  -- the default indicates no commitment
           ::= { frCircuitEntry 12 }



         frCircuitExcessBurst OBJECT-TYPE
             SYNTAX   INTEGER
             ACCESS   read-write
             STATUS   mandatory
             DESCRIPTION
                "This variable indicates the maximum amount  of
                uncommitted data bits that the network will at-
                tempt to deliver over the measurement interval.

                By default, if not configured when creating the
                entry, the Excess Information Burst Size is set
                to the value of ifSpeed."
            REFERENCE
               "Draft American National  Standard  T1.617-1991,
               Section 6.5.19"
                   ::= { frCircuitEntry 13 }



         frCircuitThroughput OBJECT-TYPE
             SYNTAX   INTEGER
             ACCESS   read-write
             STATUS   mandatory
             DESCRIPTION
                "Throughput is the average number of 'Frame Re-
                lay  Information  Field'  bits  transferred per
                second across a user network interface  in  one
                direction, measured over the measurement inter-
                val.

                If the  configured  committed  burst  rate  and
                throughput  are  both non-zero, the measurement
                interval
                T=frCircuitCommittedBurst/frCircuitThroughput.

                If the  configured  committed  burst  rate  and
                throughput  are  both zero, the measurement in-
                terval
                       T=frCircuitExcessBurst/ifSpeed."
            REFERENCE
               "Draft American National  Standard  T1.617-1991,
               Section 6.5.19"
           DEFVAL {0}  -- the default value of Throughput is
                       -- "no commitment".
           ::= { frCircuitEntry 14 }


     --  Error Table

     -- The table describing errors encountered on each Frame
     -- Relay Interface.

     frErrTable OBJECT-TYPE
         SYNTAX   SEQUENCE OF FrErrEntry
         ACCESS   not-accessible
         STATUS   mandatory
         DESCRIPTION
            "A table containing information about Errors on the
            Frame Relay interface."
         ::= { frame-relay 3 }

         frErrEntry OBJECT-TYPE
             SYNTAX   FrErrEntry
             ACCESS   not-accessible
             STATUS   mandatory
             DESCRIPTION
                "The error information for a single frame relay
                interface."
            INDEX { frErrIfIndex }
            ::= { frErrTable 1 }



         FrErrEntry ::=
             SEQUENCE {
                 frErrIfIndex
                     Index,
                 frErrType
                     INTEGER,
                 frErrData
                     OCTET STRING,
                 frErrTime
                     TimeTicks
         }



         frErrIfIndex OBJECT-TYPE
             SYNTAX   Index
             ACCESS   read-only
             STATUS   mandatory
             DESCRIPTION
                "The ifIndex Value of the  corresponding  ifEn-
                try."
            ::= { frErrEntry 1 }



         frErrType OBJECT-TYPE
             SYNTAX   INTEGER {
                         unknownError(1),
                         receiveShort(2),
                         receiveLong(3),
                         illegalDLCI(4),
                         unknownDLCI(5),
                         dlcmiProtoErr(6),
                         dlcmiUnknownIE(7),
                         dlcmiSequenceErr(8),
                         dlcmiUnknownRpt(9),
                         noErrorSinceReset(10)
                      }
             ACCESS   read-only
             STATUS   mandatory
             DESCRIPTION
                "The type of error that was last seen  on  this
                interface."
            ::= { frErrEntry 2 }



         frErrData OBJECT-TYPE
             SYNTAX   OCTET STRING
             ACCESS   read-only
             STATUS   mandatory
             DESCRIPTION
                "An octet string containing as much of the  er-
                ror  packet as possible.  As a minimum, it must
                contain the Q.922 Address or  as  much  as  was
                delivered.   It is desirable to include all in-
                formation up to the PDU."
            ::= { frErrEntry 3 }



         frErrTime OBJECT-TYPE
             SYNTAX   TimeTicks
             ACCESS   read-only
             STATUS   mandatory
             DESCRIPTION
                "The value of sysUpTime at which the error  was
                detected."
            ::= { frErrEntry 4 }


         -- Frame Relay Globals

         frame-relay-globals OBJECT IDENTIFIER ::= { frame-relay 4 }

         frTrapState OBJECT-TYPE
             SYNTAX  INTEGER { enabled(1), disabled(2) }
             ACCESS   read-write
             STATUS   mandatory
             DESCRIPTION
                "This variable  indicates  whether  the  system
                produces the frDLCIStatusChange trap."
            DEFVAL { disabled }
            ::= { frame-relay-globals 1 }


         --  Data Link Connection Management Interface Related Traps

         frDLCIStatusChange TRAP-TYPE
             ENTERPRISE frame-relay
             VARIABLES  { frCircuitIfIndex, frCircuitDlci, frCircuitState }
             DESCRIPTION
                "This trap indicates that the indicated Virtual
                Circuit  has changed state.  It has either been
                created or invalidated, or has toggled  between
                the active and inactive states."
             ::= 1

     END