fddi-smt73-mib

opennms得相关源码 请大家看看

-- Changes to rfc1512 (FDDI 7.3 SMT MIB):
--      Added the IMPORT for transmission.
-- [e-mail]

FDDI-SMT73-MIB DEFINITIONS ::= BEGIN

          IMPORTS
                  Counter
                      FROM RFC1155-SMI
                  OBJECT-TYPE
                      FROM RFC-1212
                  transmission
                      FROM RFC1213-MIB;

          --  This MIB module uses the extended OBJECT-TYPE macro as
          --  defined in [7].

          -- this is the FDDI MIB module

          fddi    OBJECT IDENTIFIER ::= { transmission 15 }
          fddimib   OBJECT IDENTIFIER ::= { fddi 73 }

          -- textual conventions

          FddiTimeNano ::= INTEGER (0..2147483647)
          -- This data type specifies 1 nanosecond units as
          -- an integer value.
          --
          -- NOTE: The encoding is normal integer representation, not
          -- two's complement.  Since this type is used for variables
          -- which are encoded as TimerTwosComplement in the ANSI
          -- specification, two operations need to be performed on such
          -- variables to convert from ANSI form to SNMP form:
          --
          -- 1) Convert from two's complement to normal integer
          --    representation
          -- 2) Multiply by 80 to convert from 80 nsec to 1 nsec units
          --
          -- No resolution is lost.  Moreover, the objects for which
          -- this data type is used effectively do not lose any range
          -- due to the lower maximum value since they do not require
          -- the full range.
          --
          -- Example: If fddimibMACTReq had a value of 8 ms, it would
          -- be stored in ANSI TimerTwosComplement format as 0xFFFE7960
          -- [8 ms is 100000 in 80 nsec units, which is then converted
          -- to two's complement] but be reported as 8000000 in SNMP
          -- since it is encoded here as FddiTimeNano.


          FddiTimeMilli ::= INTEGER (0..2147483647)
          -- This data type is used for some FDDI timers. It specifies
          -- time in 1 millisecond units, in normal integer
          -- representation.

          FddiResourceId ::= INTEGER (0..65535)
          -- This data type is used to refer to an instance of a  MAC,
          -- PORT, or PATH Resource ID.  Indexing begins
          -- at 1.  Zero is used to indicate the absence of a resource.

          FddiSMTStationIdType ::= OCTET STRING (SIZE (8))
          -- The unique identifier for the FDDI station.  This is a
          -- string of 8 octets, represented as X' yy yy xx xx xx xx
          -- xx xx' with the low order 6 octet (xx) from a unique IEEE
          -- assigned address.  The high order two bits of the IEEE
          -- address, the group address bit and the administration bit
          -- (Universal/Local) bit should both be zero.  The first two
          -- octets, the yy octets, are implementor-defined.
          --
          -- The representation of the address portion of the station id
          -- is in the IEEE (ANSI/IEEE P802.1A) canonical notation for
          -- 48 bit addresses.  The canonical form is a 6-octet string
          -- where the first octet contains the first 8 bits of the
          -- address, with the I/G(Individual/Group) address bit as the
          -- least significant bit and the  U/L (Universal/Local) bit
          -- as the next more significant bit, and so on.  Note that
          -- addresses in the ANSI FDDI standard SMT frames are
          -- represented in FDDI MAC order.

          FddiMACLongAddressType ::= OCTET STRING (SIZE (6))
          -- The representation of long MAC addresses as management
          -- values is in the IEEE (ANSI/IEEE P802.1A) canonical
          -- notation for 48 bit addresses.  The canonical form is a
          -- 6-octet string where the first octet contains the first 8
          -- bits of the address, with the I/G (Individual/Group)
          -- address bit as the least significant bit and the  U/L
          -- (Universal/Local) bit as the next more significant bit,
          -- and so on.  Note that the addresses in the SMT frames are
          -- represented in FDDI MAC order.

          -- groups in the FDDI MIB module

          fddimibSMT          OBJECT IDENTIFIER ::= { fddimib 1 }

          fddimibMAC          OBJECT IDENTIFIER ::= { fddimib 2 }

          fddimibMACCounters  OBJECT IDENTIFIER ::= { fddimib 3 }

          fddimibPATH         OBJECT IDENTIFIER ::= { fddimib 4 }

          fddimibPORT         OBJECT IDENTIFIER ::= { fddimib 5 }

          -- the SMT group
          -- Implementation of the SMT group is mandatory for all
          -- systems which implement manageable FDDI subsystems.

          fddimibSMTNumber OBJECT-TYPE
              SYNTAX  INTEGER (0..65535)
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The number of SMT implementations (regardless of
                      their current state) on this network management
                      application entity.  The value for this variable
                      must remain constant at least from one re-
                      initialization of the entity's network management
                      system to the next re-initialization."
              ::= { fddimibSMT  1 }

          -- the SMT table

          fddimibSMTTable OBJECT-TYPE
              SYNTAX  SEQUENCE OF FddimibSMTEntry
              ACCESS  not-accessible
              STATUS  mandatory
              DESCRIPTION
                      "A list of SMT entries.  The number of entries
                      shall not exceed the value of fddimibSMTNumber."
              ::= { fddimibSMT  2 }

          fddimibSMTEntry OBJECT-TYPE
              SYNTAX  FddimibSMTEntry
              ACCESS  not-accessible
              STATUS  mandatory
              DESCRIPTION
                      "An SMT entry containing information common to a
                      given SMT."
              INDEX   { fddimibSMTIndex }
              ::= { fddimibSMTTable 1 }

          FddimibSMTEntry ::=
              SEQUENCE {
                  fddimibSMTIndex
                      INTEGER,
                  fddimibSMTStationId
                      FddiSMTStationIdType,
                  fddimibSMTOpVersionId
                      INTEGER,
                  fddimibSMTHiVersionId
                      INTEGER,
                  fddimibSMTLoVersionId
                      INTEGER,
                  fddimibSMTUserData
                      OCTET STRING,
                  fddimibSMTMIBVersionId
                      INTEGER,
                  fddimibSMTMACCts
                      INTEGER,
                  fddimibSMTNonMasterCts
                      INTEGER,
                  fddimibSMTMasterCts
                      INTEGER,
                  fddimibSMTAvailablePaths
                      INTEGER,
                  fddimibSMTConfigCapabilities
                      INTEGER,
                  fddimibSMTConfigPolicy
                      INTEGER,
                  fddimibSMTConnectionPolicy
                      INTEGER,
                  fddimibSMTTNotify
                      INTEGER,
                  fddimibSMTStatRptPolicy
                      INTEGER,
                  fddimibSMTTraceMaxExpiration
                      FddiTimeMilli,
                  fddimibSMTBypassPresent
                      INTEGER,
                  fddimibSMTECMState
                      INTEGER,
                  fddimibSMTCFState
                      INTEGER,
                  fddimibSMTRemoteDisconnectFlag
                      INTEGER,
                  fddimibSMTStationStatus
                      INTEGER,
                  fddimibSMTPeerWrapFlag
                      INTEGER,
                  fddimibSMTTimeStamp
                      FddiTimeMilli,
                  fddimibSMTTransitionTimeStamp
                      FddiTimeMilli,
                  fddimibSMTStationAction
                      INTEGER
              }

          fddimibSMTIndex OBJECT-TYPE
              SYNTAX  INTEGER (1..65535)
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "A unique value for each SMT.  The value for each
                      SMT must remain constant at least from one re-
                      initialization of the entity's network management
                      system to the next re-initialization."
              ::= { fddimibSMTEntry 1 }

          fddimibSMTStationId OBJECT-TYPE
              SYNTAX  FddiSMTStationIdType -- OCTET STRING (SIZE (8))
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "Used to uniquely identify an FDDI station."
              REFERENCE
                      "ANSI { fddiSMT 11 }"
              ::= { fddimibSMTEntry 2 }

          fddimibSMTOpVersionId OBJECT-TYPE
              SYNTAX  INTEGER (1..65535)
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The version that this station is using for its
                      operation (refer to ANSI 7.1.2.2). The value of
                      this variable is 2 for this SMT revision."
              REFERENCE
                      "ANSI { fddiSMT 13 }"
              ::= { fddimibSMTEntry 3 }

          fddimibSMTHiVersionId OBJECT-TYPE
              SYNTAX  INTEGER (1..65535)
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The highest version of SMT that this station
                      supports (refer to ANSI 7.1.2.2)."
              REFERENCE
                      "ANSI { fddiSMT 14 }"
              ::= { fddimibSMTEntry 4 }


          fddimibSMTLoVersionId OBJECT-TYPE
              SYNTAX  INTEGER (1..65535)
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The lowest version of SMT that this station
                      supports (refer to ANSI 7.1.2.2)."
              REFERENCE
                      "ANSI { fddiSMT 15 }"
              ::= { fddimibSMTEntry 5 }

          fddimibSMTUserData OBJECT-TYPE
              SYNTAX  OCTET STRING (SIZE (32))
              ACCESS  read-write
              STATUS  mandatory
              DESCRIPTION
                      "This variable contains 32 octets of user defined
                      information. The information shall be an ASCII
                      string."
              REFERENCE
                      "ANSI { fddiSMT 17 }"
              ::= { fddimibSMTEntry 6 }

          fddimibSMTMIBVersionId OBJECT-TYPE
              SYNTAX  INTEGER (0..65535)
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The version of the FDDI MIB of this station.  The
                      value of this variable is 1 for this SMT
                      revision."
              REFERENCE
                      "ANSI { fddiSMT 18 }"
              ::= { fddimibSMTEntry 7 }

          fddimibSMTMACCts OBJECT-TYPE
              SYNTAX  INTEGER (0..255)
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The number of MACs in this station or
                      concentrator."
              REFERENCE
                      "ANSI { fddiSMT 21 }"
              ::= { fddimibSMTEntry 8 }

          fddimibSMTNonMasterCts OBJECT-TYPE
              SYNTAX  INTEGER (0..2)
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The value of this variable is the number of A, B,
                      and S ports in this station or concentrator."
              REFERENCE
                      "ANSI { fddiSMT 22 }"
              ::= { fddimibSMTEntry 9 }

          fddimibSMTMasterCts OBJECT-TYPE
              SYNTAX  INTEGER (0..255)
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "The number of M Ports in a node. If the node is
                      not a concentrator, the value of the variable is
                      zero."
              REFERENCE
                      "ANSI { fddiSMT 23 }"
              ::= { fddimibSMTEntry 10 }

          fddimibSMTAvailablePaths OBJECT-TYPE
              SYNTAX  INTEGER (0..7)
              ACCESS  read-only
              STATUS  mandatory
              DESCRIPTION
                      "A value that indicates the PATH types available
                      in the station.