snmp-graph.properties

opennms得相关源码 请大家看看

GPRINT:charge:MAX:"Max \\: %8.2lf %s\\n"

report.mib2.ups-time.name=UPS Time 
report.mib2.ups-time.columns=upsSecondsOnBattery, upsEstMinsRemain
report.mib2.ups-time.type=node
report.mib2.ups-time.command=--title="UPS Time Remaining" \
DEF:onBatt={rrd1}:upsSecondsOnBattery:AVERAGE \
DEF:timeRemain={rrd2}:upsEstMinsRemain:AVERAGE \
CDEF:onBattMin=onBatt,60,/ \
LINE2:onBattMin#cc0000:"Time on Battery " \
GPRINT:onBattMin:AVERAGE:" Avg \\: %8.2lf %s" \
GPRINT:onBattMin:MIN:"Min \\: %8.2lf %s" \
GPRINT:onBattMin:MAX:"Max \\: %8.2lf %s\\n" \
LINE2:timeRemain#000000:"Time Remaining  " \
GPRINT:timeRemain:AVERAGE:" Avg \\: %8.2lf %s" \
GPRINT:timeRemain:MIN:"Min \\: %8.2lf %s" \
GPRINT:timeRemain:MAX:"Max \\: %8.2lf %s\\n"

report.mib2.ups-volt.name=UPS Voltage
report.mib2.ups-volt.columns=upsBatteryVoltage
report.mib2.ups-volt.type=node
report.mib2.ups-volt.command=--title="UPS Voltage" \
DEF:voltageRaw={rrd1}:upsBatteryVoltage:AVERAGE \
CDEF:voltage=voltageRaw,10,/ \
LINE2:voltage#000000:"DC Volts " \
GPRINT:voltage:AVERAGE:" Avg \\: %8.2lf %s" \
GPRINT:voltage:MIN:"Min \\: %8.2lf %s" \
GPRINT:voltage:MAX:"Max \\: %8.2lf %s\\n"

report.mib2printer.lifeCount.name=Total Pages Printed
report.mib2printer.lifeCount.columns=lifeCount
report.mib2printer.lifeCount.type=node
report.mib2printer.lifeCount.command=--title="Total Pages Printed" \
 DEF:val1={rrd1}:lifeCount:AVERAGE \
 LINE1:val1#00cc00:"Total Pages Printed" \
 GPRINT:val1:AVERAGE:" Avg  \\: %8.2lf %s" \
 GPRINT:val1:MIN:"Min  \\: %8.2lf %s" \
 GPRINT:val1:MAX:"Max  \\: %8.2lf %s\\n"

report.mib2printer.powerOnCount.name=Total Pages Printed Since Being Powered On
report.mib2printer.powerOnCount.columns=powerOnCount
report.mib2printer.powerOnCount.type=node
report.mib2printer.powerOnCount.command=--title="Total Pages Printed Since Being Powered On" \
 DEF:val1={rrd1}:powerOnCount:AVERAGE \
 LINE1:val1#00cc00:"Total Pages Printed" \
 GPRINT:val1:AVERAGE:" Avg  \\: %8.2lf %s" \
 GPRINT:val1:MIN:"Min  \\: %8.2lf %s" \
 GPRINT:val1:MAX:"Max  \\: %8.2lf %s\\n"

#####################################
###### Vendor Specific Reports ######
#####################################

######
###### Reports for APC UPSs
######

report.apc.load.name=APC Battery Load
report.apc.load.columns=apcload
report.apc.load.type=node
report.apc.load.command=--title="APC Battery Load" \
 --units-exponent 0  --upper-limit 100 \
 DEF:apcload={rrd1}:apcload:AVERAGE \
 LINE2:apcload#000000:"load Left" \
 GPRINT:apcload:AVERAGE:" Avg  \\: %8.2lf %s" \
 GPRINT:apcload:MIN:"Min  \\: %8.2lf %s" \
 GPRINT:apcload:MAX:"Max  \\: %8.2lf %s\\n"

report.apc.percent.name=APC % Battery Remaining
report.apc.percent.columns=apcpercent
report.apc.percent.type=node
report.apc.percent.command=--title="APC Percent Battery Remaining" \
 --units-exponent 0 --upper-limit 100 \
 DEF:apcpercent={rrd1}:apcpercent:AVERAGE \
 LINE2:apcpercent#000000:"Percent Left" \
 GPRINT:apcpercent:AVERAGE:" Avg  \\: %8.2lf %s" \
 GPRINT:apcpercent:MIN:"Min  \\: %8.2lf %s" \
 GPRINT:apcpercent:MAX:"Max  \\: %8.2lf %s\\n"

report.apc.temp.name=Temperature
report.apc.temp.columns=apctemp
report.apc.temp.type=node
report.apc.temp.command=--title="Temp. in Fahrenheit" \
 --units-exponent 0  \
 DEF:temp={rrd1}:apctemp:AVERAGE \
 CDEF:ftemp=temp,9,*,5,/,32,+ \
 LINE2:ftemp#000000:"Temp. in Fahrenheit" \
 GPRINT:ftemp:AVERAGE:" Avg  \\: %8.2lf %s" \
 GPRINT:ftemp:MIN:"Min  \\: %8.2lf %s" \
 GPRINT:ftemp:MAX:"Max  \\: %8.2lf %s\\n"

report.apc.time.name=APC Battery Time Remaining
report.apc.time.columns=apctime
report.apc.time.type=node
report.apc.time.command=--title="APC Battery Time Remaining" \
 --units-exponent 0 \
 DEF:time={rrd1}:apctime:AVERAGE \
 CDEF:minutes=time,6000,/ \
 LINE2:minutes#000000:"Minutes" \
 GPRINT:minutes:AVERAGE:" Avg  \\: %8.2lf %s" \
 GPRINT:minutes:MIN:"Min  \\: %8.2lf %s" \
 GPRINT:minutes:MAX:"Max  \\: %8.2lf %s\\n"

report.apc.vac.name=APC UPS VAC In/Out
report.apc.vac.columns=apcinvac,apcoutvac
report.apc.vac.type=node
report.apc.vac.command=--title="APC UPS VAC In/Out" \
 DEF:vacIn={rrd1}:apcinvac:AVERAGE \
 DEF:vacOut={rrd2}:apcoutvac:AVERAGE \
 LINE2:vacIn#000000:"VAC In" \
 GPRINT:vacIn:AVERAGE:" Avg  \\: %8.2lf %s" \
 GPRINT:vacIn:MIN:"Min  \\: %8.2lf %s" \
 GPRINT:vacIn:MAX:"Max  \\: %8.2lf %s\\n" \
 LINE2:vacOut#cc0000:"VAC Out" \
 GPRINT:vacOut:AVERAGE:"Avg  \\: %8.2lf %s" \
 GPRINT:vacOut:MIN:"Min  \\: %8.2lf %s" \
 GPRINT:vacOut:MAX:"Max  \\: %8.2lf %s\\n"

######
###### Reports Generated from Checkpoint Devices
######

report.checkpoint.pktsAccepted.name=Packets Accepted (CheckPoint)
report.checkpoint.pktsAccepted.columns=pktsAccepted
report.checkpoint.pktsAccepted.type=node
report.checkpoint.pktsAccepted.command=--title="Packets Accepted" \
 --units-exponent 0 \
 DEF:accepted={rrd1}:pktsAccepted:AVERAGE \
 LINE2:accepted#000000:"Accepted" \
 GPRINT:accepted:AVERAGE:" Avg  \\: %8.2lf %s" \
 GPRINT:accepted:MIN:"Min  \\: %8.2lf %s" \
 GPRINT:accepted:MAX:"Max  \\: %8.2lf %s\\n" \

report.checkpoint.pktsDropped.name=Packets Dropped (CheckPoint)
report.checkpoint.pktsDropped.columns=pktsDropped
report.checkpoint.pktsDropped.type=node
report.checkpoint.pktsDropped.command=--title="Packets Dropped" \
 --units-exponent 0 \
 DEF:dropped={rrd1}:pktsDropped:AVERAGE \
 LINE2:dropped#000000:"Dropped" \
 GPRINT:dropped:AVERAGE:" Avg  \\: %8.2lf %s" \
 GPRINT:dropped:MIN:"Min  \\: %8.2lf %s" \
 GPRINT:dropped:MAX:"Max  \\: %8.2lf %s\\n" \

report.checkpoint.pktsLogged.name=Packets Logged (CheckPoint)
report.checkpoint.pktsLogged.columns=pktsLogged
report.checkpoint.pktsLogged.type=node
report.checkpoint.pktsLogged.command=--title="Packets Logged" \
 --units-exponent 0 \
 DEF:logged={rrd1}:pktsLogged:AVERAGE \
 LINE2:logged#000000:"Logged" \
 GPRINT:logged:AVERAGE:" Avg  \\: %8.2lf %s" \
 GPRINT:logged:MIN:"Min  \\: %8.2lf %s" \
 GPRINT:logged:MAX:"Max  \\: %8.2lf %s\\n" \

report.checkpoint.pktsRejected.name=Packets Rejected (CheckPoint)
report.checkpoint.pktsRejected.columns=pktsRejected
report.checkpoint.pktsRejected.type=node
report.checkpoint.pktsRejected.command=--title="Packets Rejected" \
 --units-exponent 0 \
 DEF:rejected={rrd1}:pktsRejected:AVERAGE \
 LINE2:rejected#000000:"Rejected" \
 GPRINT:rejected:AVERAGE:" Avg  \\: %8.2lf %s" \
 GPRINT:rejected:MIN:"Min  \\: %8.2lf %s" \
 GPRINT:rejected:MAX:"Max  \\: %8.2lf %s\\n" \

######
###### Reports Generated From Cisco OIDs
######

report.cisco.altigaactsess.name=Cisco VPN Active Sessions
report.cisco.altigaactsess.columns=altigaActSess
report.cisco.altigaactsess.type=node
report.cisco.altigaactsess.command=--title="Cisco VPN Active Sessions" \
 DEF:val1={rrd1}:altigaActSess:AVERAGE \
 LINE2:val1#000000:"Active Sessions" \
 GPRINT:val1:AVERAGE:" Avg  \\: %8.2lf %s" \
 GPRINT:val1:MIN:"Min  \\: %8.2lf %s" \
 GPRINT:val1:MAX:"Max  \\: %8.2lf %s\\n"

report.cisco.altigacpu.name=Cisco VPN CPU Utilization
report.cisco.altigacpu.columns=altigaCpuUtil
report.cisco.altigacpu.type=node
report.cisco.altigacpu.command=--title="Cisco VPN CPU Utilization" \
 DEF:val1={rrd1}:altigaCpuUtil:AVERAGE \
 LINE2:val1#000000:"CPU Utilization" \
 GPRINT:val1:AVERAGE:" Avg  \\: %8.2lf %s" \
 GPRINT:val1:MIN:"Min  \\: %8.2lf %s" \
 GPRINT:val1:MAX:"Max  \\: %8.2lf %s\\n"

report.cisco.altigafanspeed.name=Fan Speed (Cisco VPN)
report.cisco.altigafanspeed.columns=alHWFan1Rpm,alHWFan2Rpm,alHWFan3Rpm
report.cisco.altigafanspeed.type=node
report.cisco.altigafanspeed.command=--title="Cisco VPN Fan Speed (RPM)" \
 DEF:val1={rrd1}:alHWFan1Rpm:AVERAGE \
 DEF:val2={rrd2}:alHWFan2Rpm:AVERAGE \
 DEF:val3={rrd3}:alHWFan3Rpm:AVERAGE \
 LINE2:val1#000000:"Fan 1" \
 GPRINT:val1:AVERAGE:" Avg  \\: %8.2lf %s" \
 GPRINT:val1:MIN:"Min  \\: %8.2lf %s" \
 GPRINT:val1:MAX:"Max  \\: %8.2lf %s\\n" \
 LINE2:val2#cc0000:"Fan 2" \
 GPRINT:val2:AVERAGE:" Avg  \\: %8.2lf %s" \
 GPRINT:val2:MIN:"Min  \\: %8.2lf %s" \
 GPRINT:val2:MAX:"Max  \\: %8.2lf %s\\n" \
 LINE2:val3#54a4de:"Fan 3" \
 GPRINT:val3:AVERAGE:" Avg  \\: %8.2lf %s" \
 GPRINT:val3:MIN:"Min  \\: %8.2lf %s" \
 GPRINT:val3:MAX:"Max  \\: %8.2lf %s\\n"

report.cisco.altigatemp.name=Temperature (Cisco VPN)
report.cisco.altigatemp.columns=alHWCpuTemp,alHWCageTemp
report.cisco.altigatemp.type=node
report.cisco.altigatemp.command=--title="Cisco VPN Temperature" \
 DEF:val1={rrd1}:alHWCpuTemp:AVERAGE \
 DEF:val2={rrd2}:alHWCageTemp:AVERAGE \
 LINE2:val1#000000:"CPU Temperature " \
 GPRINT:val1:AVERAGE:" Avg  \\: %8.2lf %s" \
 GPRINT:val1:MIN:"Min  \\: %8.2lf %s" \
 GPRINT:val1:MAX:"Max  \\: %8.2lf %s\\n" \
 LINE2:val2#cc0000:"Cage Temperature" \
 GPRINT:val2:AVERAGE:" Avg  \\: %8.2lf %s" \
 GPRINT:val2:MIN:"Min  \\: %8.2lf %s" \
 GPRINT:val2:MAX:"Max  \\: %8.2lf %s\\n"

report.cisco.altigatput.name=Cisco VPN Throughput
report.cisco.altigatput.columns=altigaThroughput
report.cisco.altigatput.type=node
report.cisco.altigatput.command=--title="Cisco VPN Throughput" \
 DEF:val1={rrd1}:altigaThroughput:AVERAGE \
 LINE2:val1#000000:"Throughput" \
 GPRINT:val1:AVERAGE:" Avg  \\: %8.2lf %s" \
 GPRINT:val1:MIN:"Min  \\: %8.2lf %s" \
 GPRINT:val1:MAX:"Max  \\: %8.2lf %s\\n"

report.cisco.altigavoltage.name=CPU Voltage (Cisco VPN)
report.cisco.altigavoltage.columns=alHWCpuVoltage,alHWCpuVoltageNom
report.cisco.altigavoltage.type=node
report.cisco.altigavoltage.command=--title="Cisco VPN CPU Voltage" \
 DEF:val1={rrd1}:alHWCpuVoltage:AVERAGE \
 DEF:val2={rrd2}:alHWCpuVoltageNom:AVERAGE \
 LINE2:val1#000000:"CPU Voltage " \
 GPRINT:val1:AVERAGE:" Avg  \\: %8.2lf %s" \
 GPRINT:val1:MIN:"Min  \\: %8.2lf %s" \
 GPRINT:val1:MAX:"Max  \\: %8.2lf %s\\n" \
 LINE2:val2#cc0000:"Cage Voltage (nominal)" \
 GPRINT:val2:AVERAGE:" Avg  \\: %8.2lf %s" \
 GPRINT:val2:MIN:"Min  \\: %8.2lf %s" \
 GPRINT:val2:MAX:"Max  \\: %8.2lf %s\\n"

report.cisco.altiga3volt.name=Voltage 3V (Cisco VPN)
report.cisco.altiga3volt.columns=alHWPs1Voltage3v,alHWPs2Voltage3v,alHWBoardVoltage3v
report.cisco.altiga3volt.type=node
report.cisco.altiga3volt.command=--title="Cisco VPN Voltage (3V)" \
 DEF:val1={rrd1}:alHWPs1Voltage3v:AVERAGE \
 DEF:val2={rrd2}:alHWPs2Voltage3v:AVERAGE \
 DEF:val3={rrd3}:alHWBoardVoltage3v:AVERAGE \
 LINE2:val1#000000:"Power Supply 1" \
 GPRINT:val1:AVERAGE:" Avg  \\: %8.2lf %s" \
 GPRINT:val1:MIN:"Min  \\: %8.2lf %s" \
 GPRINT:val1:MAX:"Max  \\: %8.2lf %s\\n" \
 LINE2:val2#cc0000:"Power Supply 2" \
 GPRINT:val2:AVERAGE:" Avg  \\: %8.2lf %s" \
 GPRINT:val2:MIN:"Min  \\: %8.2lf %s" \
 GPRINT:val2:MAX:"Max  \\: %8.2lf %s\\n" \
 LINE2:val3#54a4de:"Board         " \
 GPRINT:val3:AVERAGE:" Avg  \\: %8.2lf %s" \
 GPRINT:val3:MIN:"Min  \\: %8.2lf %s" \
 GPRINT:val3:MAX:"Max  \\: %8.2lf %s\\n"

report.cisco.altiga5volt.name=Voltage 5V (Cisco VPN)
report.cisco.altiga5volt.columns=alHWPs1Voltage5v,alHWPs2Voltage5v,alHWBoardVoltage5v
report.cisco.altiga5volt.type=node
report.cisco.altiga5volt.command=--title="Cisco VPN Voltage (5V)" \
 DEF:val1={rrd1}:alHWPs1Voltage5v:AVERAGE \
 DEF:val2={rrd2}:alHWPs2Voltage5v:AVERAGE \
 DEF:val3={rrd3}:alHWBoardVoltage5v:AVERAGE \
 LINE2:val1#000000:"Power Supply 1" \
 GPRINT:val1:AVERAGE:" Avg  \\: %8.2lf %s" \
 GPRINT:val1:MIN:"Min  \\: %8.2lf %s" \
 GPRINT:val1:MAX:"Max  \\: %8.2lf %s\\n" \
 LINE2:val2#cc0000:"Power Supply 2" \
 GPRINT:val2:AVERAGE:" Avg  \\: %8.2lf %s" \
 GPRINT:val2:MIN:"Min  \\: %8.2lf %s" \
 GPRINT:val2:MAX:"Max  \\: %8.2lf %s\\n" \
 LINE2:val3#54a4de:"Board         " \
 GPRINT:val3:AVERAGE:" Avg  \\: %8.2lf %s" \
 GPRINT:val3:MIN:"Min  \\: %8.2lf %s" \
 GPRINT:val3:MAX:"Max  \\: %8.2lf %s\\n"

report.cisco.avgbusy5.name=CPU Utilization (Cisco)
report.cisco.avgbusy5.columns=avgBusy5
report.cisco.avgbusy5.type=node
report.cisco.avgbusy5.command=--title="CPU Utilization" \
 DEF:avgBusy={rrd1}:avgBusy5:AVERAGE \
 LINE2:avgBusy#000000:"CPU Level" \
 GPRINT:avgBusy:AVERAGE:" Avg  \\: %8.2lf %s" \
 GPRINT:avgBusy:MIN:"Min  \\: %8.2lf %s" \
 GPRINT:avgBusy:MAX:"Max  \\: %8.2lf %s\\n"
 
report.cisco.bufferfails.name=Buffer Failures (Cisco)
report.cisco.bufferfails.columns=bufferFail,bufferNoMem
report.cisco.bufferfails.type=node
report.cisco.bufferfails.command=--title="Buffer Failures" \
 DEF:bufferFail={rrd1}:bufferFail:AVERAGE \
 DEF:noMem={rrd2}:bufferNoMem:AVERAGE \
 LINE2:bufferFail#000000:"Failures (Total)" \
 GPRINT:bufferFail:AVERAGE:" Avg  \\: %8.2lf %s" \
 GPRINT:bufferFail:MIN:"Min  \\: %8.2lf %s" \
 GPRINT:bufferFail:MAX:"Max  \\: %8.2lf %s\\n" \
 LINE2:noMem#cc0000:"Failures (No Mem)" \
 GPRINT:noMem:AVERAGE:"Avg  \\: %8.2lf %s" \
 GPRINT:noMem:MIN:"Min  \\: %8.2lf %s" \
 GPRINT:noMem:MAX:"Max  \\: %8.2lf %s\\n" 

report.cisco.buffhits.name=Buffer Hits Percentages (Cisco)