pinconfig2.h

dsp2407,采集卡

//***************************************************//
#define	ClrLED0()		*PEDATDIR&=~LED0
#define	SetLED0()		*PEDATDIR|= LED0

#define	ClrLED1()		*PADATDIR&=~LED1
#define	SetLED1()		*PADATDIR|= LED1

#define	ClrLED2()		*PADATDIR&=~LED2
#define	SetLED2()		*PADATDIR|= LED2

#define	ClrX_CS()		*PFDATDIR&=~X_CS
#define	SetX_CS()		*PFDATDIR|= X_CS

#define	ClrCLKEN()		*PCDATDIR&=~CLKEN
#define	SetCLKEN()		*PCDATDIR|= CLKEN

#define	ClrRXTXEN()		*PFDATDIR&=~RXTXEN
#define	SetRXTXEN()		*PFDATDIR|= RXTXEN

#define	ClrX_WP()		*PFDATDIR&=~X_WP
#define	SetX_WP()		*PFDATDIR|= X_WP

#define	ClrX_SO()		*PBDATDIR&=~X_SO
#define	SetX_SO()		*PBDATDIR|= X_SO

#define	ClrX_SCK()		*PBDATDIR&=~X_SCK
#define	SetX_SCK()		*PBDATDIR|= X_SCK

#define	KEYIn()			(*PFDATDIR&KEY)
#define	X_SIIn()		(*PFDATDIR&X_SI)

//***************************************************//
#define	WP_Enable()		ClrX_WP()     	// X_WP='0' means WP_Enable
#define	WP_Disable()	SetX_WP()		// X_WP='1' means WP_Disable

#define	Max485Rx_ON()	ClrRXTXEN()     // Max485RxEn='0' means RX
#define	Max485Rx_OFF()	SetRXTXEN()     // Max485RxEn='1' means TX

#define	CLKout_En()		SetCLKEN()      // CLKEN='1' means enable clk out
#define	CLKout_Dis()	ClrCLKEN()      // CLKEN='0' means disable clk out

#define RunLed_ON()		SetLED0()       // RunLed='1' means	ON
#define RunLed_OFF()	ClrLED0()       // RunLed='0' means	OFF

#define	ErrLed_ON()		SetLED1()		// ErrLed='1' means	ON
#define	ErrLed_OFF()	ClrLED1()		// ErrLed='0' means	OFF

#define	OthLed_ON()		SetLED2()       // OthLed='1' means ON
#define	OthLed_OFF()	ClrLED2()       // OthLed='0' means OFF