configure

fortran并行计算包

	    esac
	    ;;
	  -* ) ac_must_keep_next=true ;;
	esac
      fi
      ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
      # Get rid of the leading space.
      ac_sep=" "
      ;;
    esac
  done
done
$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }

# When interrupted or exit'd, cleanup temporary files, and complete
# config.log.  We remove comments because anyway the quotes in there
# would cause problems or look ugly.
# WARNING: Be sure not to use single quotes in there, as some shells,
# such as our DU 5.0 friend, will then `close' the trap.
trap 'exit_status=$?
  # Save into config.log some information that might help in debugging.
  {
    echo

    cat <<\_ASBOX
## ---------------- ##
## Cache variables. ##
## ---------------- ##
_ASBOX
    echo
    # The following way of writing the cache mishandles newlines in values,
{
  (set) 2>&1 |
    case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
    *ac_space=\ *)
      sed -n \
	"s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
      ;;
    *)
      sed -n \
	"s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
      ;;
    esac;
}
    echo

    cat <<\_ASBOX
## ----------------- ##
## Output variables. ##
## ----------------- ##
_ASBOX
    echo
    for ac_var in $ac_subst_vars
    do
      eval ac_val=$`echo $ac_var`
      echo "$ac_var='"'"'$ac_val'"'"'"
    done | sort
    echo

    if test -n "$ac_subst_files"; then
      cat <<\_ASBOX
## ------------- ##
## Output files. ##
## ------------- ##
_ASBOX
      echo
      for ac_var in $ac_subst_files
      do
	eval ac_val=$`echo $ac_var`
	echo "$ac_var='"'"'$ac_val'"'"'"
      done | sort
      echo
    fi

    if test -s confdefs.h; then
      cat <<\_ASBOX
## ----------- ##
## confdefs.h. ##
## ----------- ##
_ASBOX
      echo
      sed "/^$/d" confdefs.h | sort
      echo
    fi
    test "$ac_signal" != 0 &&
      echo "$as_me: caught signal $ac_signal"
    echo "$as_me: exit $exit_status"
  } >&5
  rm -f core *.core &&
  rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
    exit $exit_status
     ' 0
for ac_signal in 1 2 13 15; do
  trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
done
ac_signal=0

# confdefs.h avoids OS command line length limits that DEFS can exceed.
rm -rf conftest* confdefs.h
# AIX cpp loses on an empty file, so make sure it contains at least a newline.
echo >confdefs.h

# Predefined preprocessor variables.

cat >>confdefs.h <<_ACEOF
#define PACKAGE_NAME "$PACKAGE_NAME"
_ACEOF


cat >>confdefs.h <<_ACEOF
#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
_ACEOF


cat >>confdefs.h <<_ACEOF
#define PACKAGE_VERSION "$PACKAGE_VERSION"
_ACEOF


cat >>confdefs.h <<_ACEOF
#define PACKAGE_STRING "$PACKAGE_STRING"
_ACEOF


cat >>confdefs.h <<_ACEOF
#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
_ACEOF


# Let the site file select an alternate cache file if it wants to.
# Prefer explicitly selected file to automatically selected ones.
if test -z "$CONFIG_SITE"; then
  if test "x$prefix" != xNONE; then
    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
  else
    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
  fi
fi
for ac_site_file in $CONFIG_SITE; do
  if test -r "$ac_site_file"; then
    { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
echo "$as_me: loading site script $ac_site_file" >&6;}
    sed 's/^/| /' "$ac_site_file" >&5
    . "$ac_site_file"
  fi
done


# Check that the precious variables saved in the cache have kept the same
# value.
ac_cache_corrupted=false
for ac_var in `(set) 2>&1 |
	       sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
  eval ac_old_set=\$ac_cv_env_${ac_var}_set
  eval ac_new_set=\$ac_env_${ac_var}_set
  eval ac_old_val="\$ac_cv_env_${ac_var}_value"
  eval ac_new_val="\$ac_env_${ac_var}_value"
  case $ac_old_set,$ac_new_set in
    set,)
      { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
      ac_cache_corrupted=: ;;
    ,set)
      { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
      ac_cache_corrupted=: ;;
    ,);;
    *)
      if test "x$ac_old_val" != "x$ac_new_val"; then
	{ echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
	{ echo "$as_me:$LINENO:   former value:  $ac_old_val" >&5
echo "$as_me:   former value:  $ac_old_val" >&2;}
	{ echo "$as_me:$LINENO:   current value: $ac_new_val" >&5
echo "$as_me:   current value: $ac_new_val" >&2;}
	ac_cache_corrupted=:
      fi;;
  esac
  # Pass precious variables to config.status.
  if test "$ac_new_set" = set; then
    case $ac_new_val in
    *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
      ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
    *) ac_arg=$ac_var=$ac_new_val ;;
    esac
    case " $ac_configure_args " in
      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
      *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
    esac
  fi
done
if $ac_cache_corrupted; then
  { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
echo "$as_me: error: changes in the environment can compromise the build" >&2;}
  { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
   { (exit 1); exit 1; }; }
fi

ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu




















if test -f $CONFIG_AUX_DIR/install-sh ; then ac_aux_dir=$CONFIG_AUX_DIR
else
ac_aux_dir=
# We force the test to use the absolute path to ensure that the install
# program can be used if we cd to a different directory before using
# install.
for ac_dir in . $srcdir/.; do
  if test -f $ac_dir/install-sh; then
    ac_aux_dir=$ac_dir
    abs_ac_aux_dir=`(cd $ac_aux_dir && pwd)`
    ac_install_sh="$abs_ac_aux_dir/install-sh -c"
    break
  elif test -f $ac_dir/install.sh; then
    ac_aux_dir=$ac_dir
    abs_ac_aux_dir=`(cd $ac_aux_dir && pwd)`
    ac_install_sh="$abs_ac_aux_dir/install.sh -c"
    break
  fi
done
fi
if test -z "$ac_aux_dir"; then
  { { echo "$as_me:$LINENO: error: can not find install-sh or install.sh in . $srcdir/." >&5
echo "$as_me: error: can not find install-sh or install.sh in . $srcdir/." >&2;}
   { (exit 1); exit 1; }; }
fi
ac_config_guess=$ac_aux_dir/config.guess
ac_config_sub=$ac_aux_dir/config.sub
ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.

          ac_config_headers="$ac_config_headers trace_impl.h"


# Check whether --enable-strict or --disable-strict was given.
if test "${enable_strict+set}" = set; then
  enableval="$enable_strict"
  COPTIONS="${COPTIONS} -Wall -O -Wstrict-prototypes -Wmissing-prototypes -DGCC_WALL"
fi;

# Check whether --enable-echo or --disable-echo was given.
if test "${enable_echo+set}" = set; then
  enableval="$enable_echo"
  set -x
fi;

# Check whether --enable-softerror or --disable-softerror was given.
if test "${enable_softerror+set}" = set; then
  enableval="$enable_softerror"

else
  enable_softerror=${slog2_enable_softerror:-no}
fi;

# Find the home directory if not specified
if test "X$srcdir" != "X." -a -s $srcdir/src/Makefile.in ; then
    top_srcdir_abs=$srcdir
else

echo "$as_me:$LINENO: checking for current directory name" >&5
echo $ECHO_N "checking for current directory name... $ECHO_C" >&6
top_srcdir_abs=$PWD
if test "${top_srcdir_abs}" != "" -a -d "${top_srcdir_abs}" ; then
    if test -r ${top_srcdir_abs}/.foo$$ ; then
        rm -f ${top_srcdir_abs}/.foo$$
	rm -f .foo$$
    fi
    if test -r ${top_srcdir_abs}/.foo$$ -o -r .foo$$ ; then
	top_srcdir_abs=
    else
	echo "test" > ${top_srcdir_abs}/.foo$$
	if test ! -r .foo$$ ; then
            rm -f ${top_srcdir_abs}/.foo$$
	    top_srcdir_abs=
        else
 	    rm -f ${top_srcdir_abs}/.foo$$
	fi
    fi
fi
if test "${top_srcdir_abs}" = "" ; then
    top_srcdir_abs=`pwd | sed -e 's%/tmp_mnt/%/%g'`
fi
if test ! -r ${top_srcdir_abs}/src/Makefile.in ; then
        top_srcdir_abs=`pwd`
    if test ! -r ${top_srcdir_abs}/src/Makefile.in ; then
	print_error "Cannot determine the root directory!"
        exit 1
    fi
    top_srcdir_abs=`pwd | sed -e 's%/tmp_mnt/%/%g'`
    if test ! -d ${top_srcdir_abs} ; then
        print_error "Warning: your default path uses the automounter; this may"
        print_error "cause some problems if you use other NFS-connected systems."
        top_srcdir_abs=`pwd`
    fi
fi
if test -z "${top_srcdir_abs}" ; then
    top_srcdir_abs=`pwd | sed -e 's%/tmp_mnt/%/%g'`
    if test ! -d ${top_srcdir_abs} ; then
        print_error "Warning: your default path uses the automounter; this may"
        print_error "cause some problems if you use other NFS-connected systems."
        top_srcdir_abs=`pwd`
    fi
fi
echo "$as_me:$LINENO: result: ${top_srcdir_abs}" >&5
echo "${ECHO_T}${top_srcdir_abs}" >&6

fi

if test -z "$top_srcdir_abs" ; then
    top_srcdir_abs=`pwd`
fi

if test ! -d "$top_srcdir_abs" ; then

if test "$enable_softerror" = "yes" ; then
    { echo "$as_me:$LINENO: WARNING:  *** $top_srcdir_abs is not a valid directory - cannot continue " >&5
echo "$as_me: WARNING:  *** $top_srcdir_abs is not a valid directory - cannot continue " >&2;}
    exit 0
else
    { { echo "$as_me:$LINENO: error:  *** $top_srcdir_abs is not a valid directory - cannot continue " >&5
echo "$as_me: error:  *** $top_srcdir_abs is not a valid directory - cannot continue " >&2;}
   { (exit 1); exit 1; }; }
fi

fi



# Determine this package's name based on its directory name

tmpname="`echo $top_srcdir_abs | sed -e 's%\(.*\)/\([^/]*\)%\2%'`"
pkgname="`echo $tmpname | sed -e 'y%abcdefghijklmnopqrstuvwxyz/%ABCDEFGHIJKLMNOPQRSTUVWXYZ_%'`"

if test "x$pkgname" = "x" ; then
    pkgname="TRACE-IMPL"
fi

echo "Configuring $pkgname implementation with $ac_configure_args"

# Cannot use JAVA_HOME here in this configure.in.
# Because JAVA_HOME is used in Blackdown's .java_wrapper in jdk117_v3
# Using JAVA_HOME here would mistakenly set some variable in .java_wrapper
# when .java_wrapper is invoked.  i.e. causes mysterious error in tests.

# Check whether --with-java or --without-java was given.
if test "${with_java+set}" = set; then
  withval="$with_java"
  JDK_TOPDIR=$withval
else
  JDK_TOPDIR=""
fi;


# Check whether --with-java2 or --without-java2 was given.
if test "${with_java2+set}" = set; then
  withval="$with_java2"
  JDK_TOPDIR=$withval
fi;


# Check whether --with-jvmflags or --without-jvmflags was given.
if test "${with_jvmflags+set}" = set; then
  withval="$with_jvmflags"
  JVMFLAGS="$withval"
fi;

MAKE=${MAKE:-"make"}

echo "$as_me:$LINENO: checking gnumake" >&5
echo $ECHO_N "checking gnumake... $ECHO_C" >&6
rm -f conftest
cat > conftest <<.
SHELL=/bin/sh
ALL:
	@(dir=`pwd` ; cd .. ; \$(MAKE) -f \$\$dir/conftest SUB)
SUB:
	@echo "success"
.
str=`$MAKE -f conftest 2>&1`
if test "$str" != "success" ; then
    str=`$MAKE --no-print-directory -f conftest 2>&1`
    if test "$str" = "success" ; then
        MAKE="$MAKE --no-print-directory"
	echo "$as_me:$LINENO: result: yes using --no-print-directory" >&5
echo "${ECHO_T}yes using --no-print-directory" >&6
    else
	echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
    fi
else
    echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
fi
rm -f conftest
str=""


echo "$as_me:$LINENO: checking BSD 4.4 make" >&5
echo $ECHO_N "checking BSD 4.4 make... $ECHO_C" >&6