configure

fortran并行计算包

	       sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
  eval ac_old_set=\$ac_cv_env_${ac_var}_set
  eval ac_new_set=\$ac_env_${ac_var}_set
  eval ac_old_val="\$ac_cv_env_${ac_var}_value"
  eval ac_new_val="\$ac_env_${ac_var}_value"
  case $ac_old_set,$ac_new_set in
    set,)
      { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
      ac_cache_corrupted=: ;;
    ,set)
      { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
      ac_cache_corrupted=: ;;
    ,);;
    *)
      if test "x$ac_old_val" != "x$ac_new_val"; then
	{ echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
	{ echo "$as_me:$LINENO:   former value:  $ac_old_val" >&5
echo "$as_me:   former value:  $ac_old_val" >&2;}
	{ echo "$as_me:$LINENO:   current value: $ac_new_val" >&5
echo "$as_me:   current value: $ac_new_val" >&2;}
	ac_cache_corrupted=:
      fi;;
  esac
  # Pass precious variables to config.status.
  if test "$ac_new_set" = set; then
    case $ac_new_val in
    *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
      ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
    *) ac_arg=$ac_var=$ac_new_val ;;
    esac
    case " $ac_configure_args " in
      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
      *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
    esac
  fi
done
if $ac_cache_corrupted; then
  { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
echo "$as_me: error: changes in the environment can compromise the build" >&2;}
  { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
   { (exit 1); exit 1; }; }
fi

ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu




















if test -f $CONFIG_AUX_DIR/install-sh ; then ac_aux_dir=$CONFIG_AUX_DIR
else
ac_aux_dir=
# We force the test to use the absolute path to ensure that the install
# program can be used if we cd to a different directory before using
# install.
for ac_dir in . $srcdir/.; do
  if test -f $ac_dir/install-sh; then
    ac_aux_dir=$ac_dir
    abs_ac_aux_dir=`(cd $ac_aux_dir && pwd)`
    ac_install_sh="$abs_ac_aux_dir/install-sh -c"
    break
  elif test -f $ac_dir/install.sh; then
    ac_aux_dir=$ac_dir
    abs_ac_aux_dir=`(cd $ac_aux_dir && pwd)`
    ac_install_sh="$abs_ac_aux_dir/install.sh -c"
    break
  fi
done
fi
if test -z "$ac_aux_dir"; then
  { { echo "$as_me:$LINENO: error: can not find install-sh or install.sh in . $srcdir/." >&5
echo "$as_me: error: can not find install-sh or install.sh in . $srcdir/." >&2;}
   { (exit 1); exit 1; }; }
fi
ac_config_guess=$ac_aux_dir/config.guess
ac_config_sub=$ac_aux_dir/config.sub
ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.


# Check whether --enable-echo or --disable-echo was given.
if test "${enable_echo+set}" = set; then
  enableval="$enable_echo"
  set -x
fi;

# Check whether --enable-softerror or --disable-softerror was given.
if test "${enable_softerror+set}" = set; then
  enableval="$enable_softerror"

else
  enable_softerror=${slog2_enable_softerror:-no}
fi;

# Check whether --enable-swingcheck or --disable-swingcheck was given.
if test "${enable_swingcheck+set}" = set; then
  enableval="$enable_swingcheck"

else
  enable_swingcheck=yes
fi;

# Check whether --enable-jdb or --disable-jdb was given.
if test "${enable_jdb+set}" = set; then
  enableval="$enable_jdb"

else
  enable_jdb=no
fi;

# Find the home directory if not specified
if test "X$srcdir" != "X." -a -s $srcdir/bin/jumpshot.in ; then
    top_srcdir_abs=$srcdir
else

echo "$as_me:$LINENO: checking for current directory name" >&5
echo $ECHO_N "checking for current directory name... $ECHO_C" >&6
top_srcdir_abs=$PWD
if test "${top_srcdir_abs}" != "" -a -d "${top_srcdir_abs}" ; then
    if test -r ${top_srcdir_abs}/.foo$$ ; then
        rm -f ${top_srcdir_abs}/.foo$$
	rm -f .foo$$
    fi
    if test -r ${top_srcdir_abs}/.foo$$ -o -r .foo$$ ; then
	top_srcdir_abs=
    else
	echo "test" > ${top_srcdir_abs}/.foo$$
	if test ! -r .foo$$ ; then
            rm -f ${top_srcdir_abs}/.foo$$
	    top_srcdir_abs=
        else
 	    rm -f ${top_srcdir_abs}/.foo$$
	fi
    fi
fi
if test "${top_srcdir_abs}" = "" ; then
    top_srcdir_abs=`pwd | sed -e 's%/tmp_mnt/%/%g'`
fi
if test ! -r ${top_srcdir_abs}/./bin/jumpshot.in ; then
        top_srcdir_abs=`pwd`
    if test ! -r ${top_srcdir_abs}/./bin/jumpshot.in ; then
	print_error "Cannot determine the root directory!"
        exit 1
    fi
    top_srcdir_abs=`pwd | sed -e 's%/tmp_mnt/%/%g'`
    if test ! -d ${top_srcdir_abs} ; then
        print_error "Warning: your default path uses the automounter; this may"
        print_error "cause some problems if you use other NFS-connected systems."
        top_srcdir_abs=`pwd`
    fi
fi
if test -z "${top_srcdir_abs}" ; then
    top_srcdir_abs=`pwd | sed -e 's%/tmp_mnt/%/%g'`
    if test ! -d ${top_srcdir_abs} ; then
        print_error "Warning: your default path uses the automounter; this may"
        print_error "cause some problems if you use other NFS-connected systems."
        top_srcdir_abs=`pwd`
    fi
fi
echo "$as_me:$LINENO: result: ${top_srcdir_abs}" >&5
echo "${ECHO_T}${top_srcdir_abs}" >&6

fi

if test -z "$top_srcdir_abs" ; then
    top_srcdir_abs=`pwd`
fi

if test ! -d "$top_srcdir_abs" ; then

if test "$enable_softerror" = "yes" ; then
    { echo "$as_me:$LINENO: WARNING:  *** $top_srcdir_abs is not a valid directory - cannot continue " >&5
echo "$as_me: WARNING:  *** $top_srcdir_abs is not a valid directory - cannot continue " >&2;}
    exit 0
else
    { { echo "$as_me:$LINENO: error:  *** $top_srcdir_abs is not a valid directory - cannot continue " >&5
echo "$as_me: error:  *** $top_srcdir_abs is not a valid directory - cannot continue " >&2;}
   { (exit 1); exit 1; }; }
fi

fi



# Determine this package's name based on its directory name
tmpname="`echo $top_srcdir_abs | sed -e 's%\(.*\)/\([^/]*\)%\2%'`"
pkgname="`echo $tmpname | sed -e 'y%abcdefghijklmnopqrstuvwxyz/%ABCDEFGHIJKLMNOPQRSTUVWXYZ_%'`"
if test "x$pkgname" = "x" ; then
    pkgname="SLOG-2/Jumpshot-4"
fi

echo "Configuring $pkgname with $ac_configure_args"
#
# Cannot use JAVA_HOME here in this configure.in.
# Because JAVA_HOME is used in Blackdown's .java_wrapper in jdk117_v3
# Using JAVA_HOME here would mistakenly set some variable in .java_wrapper
# when .java_wrapper is invoked.  i.e. causes mysterious error in tests.

# Check whether --with-java or --without-java was given.
if test "${with_java+set}" = set; then
  withval="$with_java"
  JRE_TOPDIR=$withval
else
  JRE_TOPDIR=""
fi;


# Check whether --with-java2 or --without-java2 was given.
if test "${with_java2+set}" = set; then
  withval="$with_java2"
  JRE_TOPDIR=$withval
fi;


# Check whether --with-jvmflags or --without-jvmflags was given.
if test "${with_jvmflags+set}" = set; then
  withval="$with_jvmflags"
  JVMFLAGS="$withval"
fi;


# Check whether --with-trace_libdir or --without-trace_libdir was given.
if test "${with_trace_libdir+set}" = set; then
  withval="$with_trace_libdir"
  TRACE_LIBDIR=$withval
fi;


# Check whether --with-trace_name or --without-trace_name was given.
if test "${with_trace_name+set}" = set; then
  withval="$with_trace_name"
  TRACE_NAME=$withval
fi;


# Check whether --with-docdir or --without-docdir was given.
if test "${with_docdir+set}" = set; then
  withval="$with_docdir"

else
  with_docdir='${prefix}/doc'
fi;

#
# Set the defaults for directories that are not included in configure's
if test -n "$with_docdir" ; then
    docdir=$with_docdir
else
    docdir='${prefix}/doc'
fi


# Fixup for make
MAKE=${MAKE:-make}

echo "$as_me:$LINENO: checking gnumake" >&5
echo $ECHO_N "checking gnumake... $ECHO_C" >&6
rm -f conftest
cat > conftest <<.
SHELL=/bin/sh
ALL:
	@(dir=`pwd` ; cd .. ; \$(MAKE) -f \$\$dir/conftest SUB)
SUB:
	@echo "success"
.
str=`$MAKE -f conftest 2>&1`
if test "$str" != "success" ; then
    str=`$MAKE --no-print-directory -f conftest 2>&1`
    if test "$str" = "success" ; then
        MAKE="$MAKE --no-print-directory"
	echo "$as_me:$LINENO: result: yes using --no-print-directory" >&5
echo "${ECHO_T}yes using --no-print-directory" >&6
    else
	echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
    fi
else
    echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
fi
rm -f conftest
str=""


echo "$as_me:$LINENO: checking BSD 4.4 make" >&5
echo $ECHO_N "checking BSD 4.4 make... $ECHO_C" >&6
rm -f conftest
cat > conftest <<.
ALL:
	@echo "success"
.
cat > conftest1 <<.
include conftest
.
str=`$MAKE -f conftest1 2>&1`
rm -f conftest conftest1
if test "$str" != "success" ; then
    echo "$as_me:$LINENO: result: Found BSD 4.4 so-called make" >&5
echo "${ECHO_T}Found BSD 4.4 so-called make" >&6
    echo "The BSD 4.4 make is INCOMPATIBLE with all other makes."
    echo "Using this so-called make may cause problems when building programs."
    echo "You should consider using gnumake instead."

else
    echo "$as_me:$LINENO: result: no - whew" >&5
echo "${ECHO_T}no - whew" >&6
fi
str=""


echo "$as_me:$LINENO: checking OSF V3 make" >&5
echo $ECHO_N "checking OSF V3 make... $ECHO_C" >&6
rm -f conftest
cat > conftest <<.
SHELL=/bin/sh
ALL:
	@# This is a valid comment!
	@echo "success"
.
str=`$MAKE -f conftest 2>&1`
rm -f conftest
if test "$str" != "success" ; then
    echo "$as_me:$LINENO: result: Found OSF V3 make" >&5
echo "${ECHO_T}Found OSF V3 make" >&6
    echo "The OSF V3 make does not allow comments in target code."
    echo "Using this make may cause problems when building programs."
    echo "You should consider using gnumake instead."

else
    echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
fi
str=""



echo "$as_me:$LINENO: checking for virtual path format" >&5
echo $ECHO_N "checking for virtual path format... $ECHO_C" >&6
rm -rf conftest*
mkdir conftestdir
cat >conftestdir/a.c <<EOF
A sample file
EOF
cat > conftest <<EOF
all: a.o
VPATH=.:conftestdir
.c.o:
	@echo \$<
EOF
ac_out=`$MAKE -f conftest 2>&1 | grep 'conftestdir/a.c'`
if test -n "$ac_out" ; then
    echo "$as_me:$LINENO: result: VPATH" >&5
echo "${ECHO_T}VPATH" >&6
    VPATH='VPATH=.:$(srcdir)'
else
    rm -f conftest
    cat > conftest <<EOF
all: a.o
.PATH: . conftestdir
.c.o:
	@echo \$<
EOF
    ac_out=`$MAKE -f conftest 2>&1 | grep 'conftestdir/a.c'`
    if test -n "$ac_out" ; then
        echo "$as_me:$LINENO: result: .PATH" >&5
echo "${ECHO_T}.PATH" >&6
        VPATH='.PATH: . $(srcdir)'
    else
	echo "$as_me:$LINENO: result: neither VPATH nor .PATH works" >&5
echo "${ECHO_T}neither VPATH nor .PATH works" >&6
    fi
fi
rm -rf conftest*

# If we are relying on VPATH and no VPATH is set, then we must exit
if test ! -s bin/jumpshot.in -a -z "$VPATH" ; then
    { { echo "$as_me:$LINENO: error: No virtual MAKE path command found.
	You may need to set your make command.