gas-defs.exp

俄罗斯高人Mamaich的Pocket gcc编译器（运行在PocketPC上）的全部源代码。

	}
	if {$program == ""} {
	    perror "dump program unspecified in $file.d"
	    unresolved $subdir/$name
	    return
	}
    }

    set progopts1 $opts($program)
    eval set progopts \$[string toupper $program]FLAGS
    eval set binary \$[string toupper $program]
    if { $opts(name) == "" } {
	set testname "$subdir/$name"
    } else {
	set testname $opts(name)
    }

    if { $opts(source) == "" } {
	set sourcefile ${file}.s
    } else {
	set sourcefile $srcdir/$subdir/$opts(source)
    }

    send_log "$AS $ASFLAGS $opts(as) -o dump.o $sourcefile\n"
    catch "exec $srcdir/lib/run $AS $ASFLAGS $opts(as) -o dump.o $sourcefile" comp_output
    set comp_output [prune_warnings $comp_output]

    if ![string match "" $comp_output] then {
	if { $opts(stderr) == "" }  then {
	    send_log "$comp_output\n"
	    verbose "$comp_output" 3

	    if { $opts(error) != "" } {
		verbose -log "failed with: <$comp_output>, expected: <$opts(error)>"
		if [regexp $opts(error) $comp_output] {
		    pass $testname
		    return
		}
	    }
	    fail $testname
	    return
	} else {
	    catch {write_file dump.stderr "$comp_output"} write_output
	    if ![string match "" $write_output] then {
		send_log "error writing dump.stderr: $write_output\n"
		verbose "error writing dump.stderr: $write_output" 3
		send_log "$comp_output\n"
		verbose "$comp_output" 3
		fail $testname
		return
	    }
	    set stderrfile $srcdir/$subdir/$opts(stderr)
	    send_log "wrote pruned stderr to dump.stderr\n"
	    verbose "wrote pruned stderr to dump.stderr" 3
	    if { [regexp_diff "dump.stderr" "$stderrfile"] } then {
		if { $opts(error) != "" } {
		    verbose -log "failed with: <$comp_output>, expected: <$opts(error)>"
		    if [regexp $opts(error) $comp_output] {
			pass $testname
			return
		    }
		}
		fail $testname
		verbose "pruned stderr is [file_contents "dump.stderr"]" 2
		return
	    }
	}
    }

    if { [which $binary] == 0 } {
	untested $testname
	return
    }

    if { $progopts1 == "" } { set $progopts1 "-r" }
    verbose "running $binary $progopts $progopts1" 3

    # Objcopy, unlike the other two, won't send its output to stdout,
    # so we have to run it specially.
    set cmd "$binary $progopts $progopts1 dump.o > dump.out"
    if { $program == "objcopy" } {
	set cmd "$binary $progopts $progopts1 dump.o dump.out"
    }

    # Ensure consistent sorting of symbols
    if {[info exists env(LC_ALL)]} {
	set old_lc_all $env(LC_ALL)
    }
    set env(LC_ALL) "C"
    send_log "$cmd\n"
    catch "exec $cmd" comp_output
    if {[info exists old_lc_all]} {
	set env(LC_ALL) $old_lc_all
    } else {
	unset env(LC_ALL)
    }
    set comp_output [prune_warnings $comp_output]
    if ![string match "" $comp_output] then {
	send_log "$comp_output\n"
	fail $testname
	return
    }

    verbose_eval {[file_contents "dump.out"]} 3
    if { [regexp_diff "dump.out" "${file}.d"] } then {
	fail $testname
	verbose "output is [file_contents "dump.out"]" 2
	return
    }

    pass $testname
}

proc slurp_options { file } {
    if [catch { set f [open $file r] } x] {
	#perror "couldn't open `$file': $x"
	perror "$x"
	return -1
    }
    set opt_array {}
    # whitespace expression
    set ws  {[ 	]*}
    set nws {[^ 	]*}
    # whitespace is ignored anywhere except within the options list;
    # option names are alphabetic only
    set pat "^#${ws}(\[a-zA-Z\]*)$ws:${ws}(.*)$ws\$"
    while { [gets $f line] != -1 } {
	set line [string trim $line]
	# Whitespace here is space-tab.
	if [regexp $pat $line xxx opt_name opt_val] {
	    # match!
	    lappend opt_array [list $opt_name $opt_val]
	} else {
	    break
	}
    }
    close $f
    return $opt_array
}

proc objdump { opts } {
    global OBJDUMP
    global comp_output
    global host_triplet

    catch "exec $OBJDUMP $opts" comp_output
    set comp_output [prune_warnings $comp_output]
    verbose "objdump output=$comp_output\n" 3
}

proc objdump_start_no_subdir { prog opts } {
    global OBJDUMP
    global srcdir
    global spawn_id

    verbose "Starting $OBJDUMP $opts $prog" 2
    catch {
	spawn -noecho -nottyinit $srcdir/lib/run $OBJDUMP $opts $prog
    } foo
    if ![regexp {^[0-9]+} $foo] then {
	perror "Can't run $prog: $foo"
    }
}

proc objdump_finish { } {
    global spawn_id

    catch "close"
    catch "wait"
}

# Default timeout is 10 seconds, loses on a slow machine.  But some
# configurations of dejagnu may override it.
if {$timeout<120} then { set timeout 120 }

expect_after -i {
    timeout			{ perror "timeout" }
    "virtual memory exhausted"	{ perror "virtual memory exhausted" }
    buffer_full			{ perror "buffer full" }
    eof				{ perror "eof" }
}

# regexp_diff, based on simple_diff taken from ld test suite
#	compares two files line-by-line
#	file1 contains strings, file2 contains regexps and #-comments
#	blank lines are ignored in either file
#	returns non-zero if differences exist
#
proc regexp_diff { file_1 file_2 } {

    set eof -1
    set end_1 0
    set end_2 0
    set differences 0
    set diff_pass 0

    if [file exists $file_1] then {
	set file_a [open $file_1 r]
    } else {
	warning "$file_1 doesn't exist"
	return 1
    }

    if [file exists $file_2] then {
	set file_b [open $file_2 r]
    } else {
	fail "$file_2 doesn't exist"
	close $file_a
	return 1
    }

    verbose " Regexp-diff'ing: $file_1 $file_2" 2

    while { 1 } {
	set line_a ""
	set line_b ""
	while { [string length $line_a] == 0 } {
	    if { [gets $file_a line_a] == $eof } {
		set end_1 1
		break
	    }
	}
	while { [string length $line_b] == 0 || [string match "#*" $line_b] } {
	    if [ string match "#pass" $line_b ] {
		set end_2 1
		set diff_pass 1
		break
	    } elseif [ string match "#..." $line_b ] {
		if { [gets $file_b line_b] == $eof } {
		    set end_2 1
		    break
		}
		verbose "looking for \"^$line_b$\"" 3
		while { ![regexp "^$line_b$" "$line_a"] } {
		    verbose "skipping    \"$line_a\"" 3
		    if { [gets $file_a line_a] == $eof } {
			set end_1 1
			break
		    }
		}
		break
	    }
	    if { [gets $file_b line_b] == $eof } {
		set end_2 1
		break
	    }
	}

        if { $diff_pass } {
            break
        } elseif { $end_1 && $end_2 } {
            break
        } elseif { $end_1 } {
            send_log "extra regexps in $file_2 starting with \"^$line_b$\"\nEOF from $file_1\n"
            verbose "extra regexps in $file_2 starting with \"^$line_b$\"\nEOF from $file_1" 3
            set differences 1
            break
        } elseif { $end_2 } {
            send_log "extra lines in $file_1 starting with \"^$line_a$\"\nEOF from $file_2\n"
            verbose "extra lines in $file_1 starting with \"^$line_a$\"\nEOF from $file_2\n" 3
            set differences 1
            break
        } else {
            verbose "regexp \"^$line_b$\"\nline   \"$line_a\"" 3
            if ![regexp "^$line_b$" "$line_a"] {
		send_log "regexp_diff match failure\n"
		send_log "regexp \"^$line_b$\"\nline   \"$line_a\"\n"
		verbose "regexp_diff match failure\n" 3
		set differences 1
            }
        }
    }

    if { $differences == 0 && !$diff_pass && [eof $file_a] != [eof $file_b] } {
	send_log "$file_1 and $file_2 are different lengths\n"
	verbose "$file_1 and $file_2 are different lengths" 3
	set differences 1
    }

    close $file_a
    close $file_b

    return $differences
}

proc file_contents { filename } {
    set file [open $filename r]
    set contents [read $file]
    close $file
    return $contents
}

proc write_file { filename contents } {
    set file [open $filename w]
    puts $file "$contents"
    close $file
}

proc verbose_eval { expr { level 1 } } {
    global verbose
    if $verbose>$level then { eval verbose "$expr" $level }
}

# This definition is taken from an unreleased version of DejaGnu.  Once
# that version gets released, and has been out in the world for a few
# months at least, it may be safe to delete this copy.
if ![string length [info proc prune_warnings]] {
    #
    # prune_warnings -- delete various system verbosities from TEXT.
    #
    # An example is:
    # ld.so: warning: /usr/lib/libc.so.1.8.1 has older revision than expected 9
    #
    # Sites with particular verbose os's may wish to override this in site.exp.
    #
    proc prune_warnings { text } {
	# This is from sun4's.  Do it for all machines for now.
	# The "\\1" is to try to preserve a "\n" but only if necessary.
	regsub -all "(^|\n)(ld.so: warning:\[^\n\]*\n?)+" $text "\\1" text

	# It might be tempting to get carried away and delete blank lines, etc.
	# Just delete *exactly* what we're ask to, and that's it.
	return $text
    }
}