spzlib.pas

DynamicSkinForm.v9.15.For.Delphi.BCB 很好的皮肤控件

{*******************************************************************}
{                                                                   }
{       Almediadev Visual Component Library                         }
{       DynamicSkinForm                                             }
{                                                                   }
{       Copyright (c) 2000-2008 Almediadev                          }
{       ALL RIGHTS RESERVED                                         }
{                                                                   }
{       Home:  http://www.almdev.com                                }
{       Support: [e-mail]                                 }
{                                                                   }
{*******************************************************************}

{ Original:
  zlib.h -- interface of the 'zlib' general purpose compression library
  version 1.1.2, Mar, 1998

  Copyright (C) 1995-1998 Jean-loup Gailly and Mark Adler

  This software is provided 'as-is', without any express or implied
  warranty.  In no event will the authors be held liable for any damages
  arising from the use of this software.

  Permission is granted to anyone to use this software for any purpose,
  including commercial applications, and to alter it and redistribute it
  freely, subject to the following restrictions:

  1. The origin of this software must not be misrepresented; you must not
     claim that you wrote the original software. If you use this software
     in a product, an acknowledgment in the product documentation would be
     appreciated but is not required.
  2. Altered source versions must be plainly marked as such, and must not be
     misrepresented as being the original software.
  3. This notice may not be removed or altered from any source distribution.

  Jean-loup Gailly        Mark Adler
  [e-mail]          [e-mail]


  The data format used by the zlib library is described by RFCs (Request for
  Comments) 1950 to 1952 in the files ftp://ds.internic.net/rfc/rfc1950.txt
  (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format).

  Pascal tranlastion
  Copyright (C) 1998 by Jacques Nomssi Nzali
}

unit spzlib;

{$WARNINGS OFF}
{$HINTS OFF}
{$T-}
{$define patch112}        { apply patch from the zlib home page }
{$define ORG_DEBUG}
{$DEFINE MAX_MATCH_IS_258}

interface

type
  {Byte   = usigned char;  8 bits}
  Bytef  = byte;
  charf  = byte;

  int    = integer;

  intf   = int;
  uInt   = cardinal;     { 16 bits or more }
  uIntf  = uInt;

  Long   = longint;
  uLong  = LongInt;      { 32 bits or more }
  uLongf = uLong;

  voidp  = pointer;
  voidpf = voidp;
  pBytef = ^Bytef;
  pIntf  = ^intf;
  puIntf = ^uIntf;
  puLong = ^uLongf;

  ptr2int = uInt;
{ a pointer to integer casting is used to do pointer arithmetic.
  ptr2int must be an integer type and sizeof(ptr2int) must be less
  than sizeof(pointer) - Nomssi }

type
  zByteArray = array[0..(MaxInt div SizeOf(Bytef))-1] of Bytef;
  pzByteArray = ^zByteArray;
type
  zIntfArray = array[0..(MaxInt div SizeOf(Intf))-1] of Intf;
  pzIntfArray = ^zIntfArray;
type
  zuIntArray = array[0..(MaxInt div SizeOf(uInt))-1] of uInt;
  PuIntArray = ^zuIntArray;

{ Type declarations - only for deflate }

type
  uch  = Byte;
  uchf = uch; { FAR }
  ush  = Word;
  ushf = ush;
  ulg  = LongInt;

  unsigned = uInt;

  pcharf = ^charf;
  puchf = ^uchf;
  pushf = ^ushf;

type
  zuchfArray = zByteArray;
  puchfArray = ^zuchfArray;
type
  zushfArray = array[0..(MaxInt div SizeOf(ushf))-1] of ushf;
  pushfArray = ^zushfArray;

procedure zmemcpy(destp : pBytef; sourcep : pBytef; len : uInt);
function zmemcmp(s1p, s2p : pBytef; len : uInt) : int;
procedure zmemzero(destp : pBytef; len : uInt);
procedure zcfree(opaque : voidpf; ptr : voidpf);
function zcalloc (opaque : voidpf; items : uInt; size : uInt) : voidpf;


{ zlib.h }

{ Maximum value for memLevel in deflateInit2 }
const
  MAX_MEM_LEVEL = 9;
  DEF_MEM_LEVEL = 8; { if MAX_MEM_LEVEL > 8 }

{ Maximum value for windowBits in deflateInit2 and inflateInit2 }
const
  MAX_WBITS = 15; { 32K LZ77 window }
{ default windowBits for decompression. MAX_WBITS is for compression only }
const
  DEF_WBITS = MAX_WBITS;

{ The memory requirements for deflate are (in bytes):
            1 shl (windowBits+2)   +  1 shl (memLevel+9)
 that is: 128K for windowBits=15  +  128K for memLevel = 8  (default values)
 plus a few kilobytes for small objects. For example, if you want to reduce
 the default memory requirements from 256K to 128K, compile with
     DMAX_WBITS=14 DMAX_MEM_LEVEL=7
 Of course this will generally degrade compression (there's no free lunch).

 The memory requirements for inflate are (in bytes) 1 shl windowBits
 that is, 32K for windowBits=15 (default value) plus a few kilobytes
 for small objects. }


{ Huffman code lookup table entry--this entry is four bytes for machines
  that have 16-bit pointers (e.g. PC's in the small or medium model). }

type
  pInflate_huft = ^inflate_huft;
  inflate_huft = Record
    Exop,             { number of extra bits or operation }
    bits : Byte;      { number of bits in this code or subcode }
    {pad : uInt;}       { pad structure to a power of 2 (4 bytes for }
                      {  16-bit, 8 bytes for 32-bit int's) }
    base : uInt;      { literal, length base, or distance base }
                      { or table offset }
  End;

type
  huft_field = Array[0..(MaxInt div SizeOf(inflate_huft))-1] of inflate_huft;
  huft_ptr = ^huft_field;
type
  ppInflate_huft = ^pInflate_huft;

type
  inflate_codes_mode = ( { waiting for "i:"=input, "o:"=output, "x:"=nothing }
        START,    { x: set up for LEN }
        LEN,      { i: get length/literal/eob next }
        LENEXT,   { i: getting length extra (have base) }
        DIST,     { i: get distance next }
        DISTEXT,  { i: getting distance extra }
        COPY,     { o: copying bytes in window, waiting for space }
        LIT,      { o: got literal, waiting for output space }
        WASH,     { o: got eob, possibly still output waiting }
        ZEND,     { x: got eob and all data flushed }
        BADCODE); { x: got error }

{ inflate codes private state }
type
  pInflate_codes_state = ^inflate_codes_state;
  inflate_codes_state = record

    mode : inflate_codes_mode;        { current inflate_codes mode }

    { mode dependent information }
    len : uInt;
    sub : record                      { submode }
      Case Byte of
      0:(code : record                { if LEN or DIST, where in tree }
          tree : pInflate_huft;       { pointer into tree }
          need : uInt;                { bits needed }
         end);
      1:(lit : uInt);                 { if LIT, literal }
      2:(copy: record                 { if EXT or COPY, where and how much }
           get : uInt;                { bits to get for extra }
           dist : uInt;               { distance back to copy from }
         end);
    end;

    { mode independent information }
    lbits : Byte;                     { ltree bits decoded per branch }
    dbits : Byte;                     { dtree bits decoder per branch }
    ltree : pInflate_huft;            { literal/length/eob tree }
    dtree : pInflate_huft;            { distance tree }
  end;

type
  check_func = function(check : uLong;
                        buf : pBytef;
                        {const buf : array of byte;}
	                len : uInt) : uLong;
type
  inflate_block_mode =
     (ZTYPE,    { get type bits (3, including end bit) }
      LENS,     { get lengths for stored }
      STORED,   { processing stored block }
      TABLE,    { get table lengths }
      BTREE,    { get bit lengths tree for a dynamic block }
      DTREE,    { get length, distance trees for a dynamic block }
      CODES,    { processing fixed or dynamic block }
      DRY,      { output remaining window bytes }
      BLKDONE,  { finished last block, done }
      BLKBAD);  { got a data error--stuck here }

type
  pInflate_blocks_state = ^inflate_blocks_state;

{ inflate blocks semi-private state }
  inflate_blocks_state = record

    mode : inflate_block_mode;     { current inflate_block mode }

    { mode dependent information }
    sub : record                  { submode }
    case Byte of
    0:(left : uInt);              { if STORED, bytes left to copy }
    1:(trees : record             { if DTREE, decoding info for trees }
        table : uInt;               { table lengths (14 bits) }
        index : uInt;               { index into blens (or border) }
        blens : PuIntArray;         { bit lengths of codes }
        bb : uInt;                  { bit length tree depth }
        tb : pInflate_huft;         { bit length decoding tree }
      end);
    2:(decode : record            { if CODES, current state }
        tl : pInflate_huft;
        td : pInflate_huft;         { trees to free }
        codes : pInflate_codes_state;
      end);
    end;
    last : boolean;               { true if this block is the last block }

    { mode independent information }
    bitk : uInt;            { bits in bit buffer }
    bitb : uLong;           { bit buffer }
    hufts : huft_ptr; {pInflate_huft;}  { single malloc for tree space }
    window : pBytef;        { sliding window }
    zend : pBytef;          { one byte after sliding window }
    read : pBytef;          { window read pointer }
    write : pBytef;         { window write pointer }
    checkfn : check_func;   { check function }
    check : uLong;          { check on output }
  end;

type
  inflate_mode = (
      METHOD,   { waiting for method byte }
      FLAG,     { waiting for flag byte }
      DICT4,    { four dictionary check bytes to go }
      DICT3,    { three dictionary check bytes to go }
      DICT2,    { two dictionary check bytes to go }
      DICT1,    { one dictionary check byte to go }
      DICT0,    { waiting for inflateSetDictionary }
      BLOCKS,   { decompressing blocks }
      CHECK4,   { four check bytes to go }
      CHECK3,   { three check bytes to go }
      CHECK2,   { two check bytes to go }
      CHECK1,   { one check byte to go }
      DONE,     { finished check, done }
      BAD);     { got an error--stay here }

{ inflate private state }
type
  pInternal_state = ^internal_state; { or point to a deflate_state record }
  internal_state = record

     mode : inflate_mode;  { current inflate mode }

     { mode dependent information }
     sub : record          { submode }
       case byte of
       0:(method : uInt);  { if FLAGS, method byte }
       1:(check : record   { if CHECK, check values to compare }
           was : uLong;        { computed check value }
           need : uLong;       { stream check value }
          end);
       2:(marker : uInt);  { if BAD, inflateSync's marker bytes count }
     end;

     { mode independent information }
     nowrap : boolean;      { flag for no wrapper }
     wbits : uInt;          { log2(window size)  (8..15, defaults to 15) }
     blocks : pInflate_blocks_state;    { current inflate_blocks state }
   end;

type
  alloc_func = function(opaque : voidpf; items : uInt; size : uInt) : voidpf;
  free_func = procedure(opaque : voidpf; address : voidpf);

type
  z_streamp = ^z_stream;
  z_stream = record
    next_in : pBytef;     { next input byte }
    avail_in : uInt;      { number of bytes available at next_in }
    total_in : uLong;     { total nb of input bytes read so far }

    next_out : pBytef;    { next output byte should be put there }
    avail_out : uInt;     { remaining free space at next_out }
    total_out : uLong;    { total nb of bytes output so far }

    msg : string;         { last error message, '' if no error }
    state : pInternal_state; { not visible by applications }

    zalloc : alloc_func;  { used to allocate the internal state }
    zfree : free_func;    { used to free the internal state }
    opaque : voidpf;      { private data object passed to zalloc and zfree }

    data_type : int;      { best guess about the data type: ascii or binary }
    adler : uLong;        { adler32 value of the uncompressed data }
    reserved : uLong;     { reserved for future use }
  end;


{  The application must update next_in and avail_in when avail_in has
   dropped to zero. It must update next_out and avail_out when avail_out
   has dropped to zero. The application must initialize zalloc, zfree and
   opaque before calling the init function. All other fields are set by the
   compression library and must not be updated by the application.

   The opaque value provided by the application will be passed as the first
   parameter for calls of zalloc and zfree. This can be useful for custom
   memory management. The compression library attaches no meaning to the
   opaque value.

   zalloc must return Z_NULL if there is not enough memory for the object.
   On 16-bit systems, the functions zalloc and zfree must be able to allocate
   exactly 65536 bytes, but will not be required to allocate more than this
   if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS,
   pointers returned by zalloc for objects of exactly 65536 bytes *must*
   have their offset normalized to zero. The default allocation function
   provided by this library ensures this (see zutil.c). To reduce memory
   requirements and avoid any allocation of 64K objects, at the expense of
   compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h).

   The fields total_in and total_out can be used for statistics or
   progress reports. After compression, total_in holds the total size of