r2d_tfd_lcd_phillips.h

来自「MMI层OBJ不能完全编译」· C头文件 代码 · 共 49 行

#ifndef _R2D_ISAMPLE_CMDS_H_
#define _R2D_ISAMPLE_CMDS_H_

/******* Register Define ***************/

#define START_OSCILLATION            0x00
#define DRIVER_OUTPUT_CONTROL        0x01
#define LCD_DRIVING_WAVEFORM_CONTROL 0x02
#define ENTRY_MODE                   0x03
#define COMPARE_REGISTER1            0x04
#define COMPARE_REGISTER2            0x05

#define DISPLAY_CONTROL_ONE          0x07
#define DISPLAY_CONTROL_TWO          0x08
#define GATE_DRIVER_IF               0x0A
#define FRAME_CYCLE_CONTROL          0x0B
#define EXTERNAL_IF_CONTROL		   0x0C
#define LTPS_IF			   0x0D

#define POWER_CONTROL_ONE            0x10
#define POWER_CONTROL_TWO            0x11
#define POWER_CONTROL_THREE          0x12
#define POWER_CONTROL_FOUR           0x13
#define POWER_CONTROL_FIVE           0x14

#define RAM_ADDRESS_SET              0x21
#define READ_WRITE_TO_RAM            0x22
#define RAM_WRITE_DATA_MASK1         0x23
#define RAM_WRITE_DATA_MASK2         0x24


#define GAMMA_ONE	             0x30
#define GAMMA_TWO	             0x31
#define GAMMA_THREE	             0x32
#define GAMMA_FOUR	             0x33
#define GAMMA_FIVE	             0x34
#define GAMMA_SIX	             0x35
#define GAMMA_SEVEN	             0x36
#define GAMMA_EIGHT	             0x37 

#define GATE_SCANING	             0x40
#define VERTICAL_SCROLL_CONTROL      0x41
#define FIRST_SCRN_DRIVING_POSITION  0x42
#define SECOND_SCRN_DRIVING_POSITION 0x43
#define HORZ_RAM_ADDRESS_POSITION    0x44
#define VERT_RAM_ADDRESS_POSITION    0x45

#endif