demo_6_9.i

AVR单片机嵌入式系统原理与应用实践例码

/*********************************************
File name           : Demo_6_9.c
Chip type           : ATmega16
Program type        : Application
Clock frequency     : 4.000000 MHz
Memory model        : Small
External SRAM size  : 0
Data Stack size     : 256
*********************************************/
// CodeVisionAVR C Compiler
// (C) 1998-2001 Pavel Haiduc, HP InfoTech S.R.L.

// I/O registers definitions for the ATmega16


#pragma used+
sfrb TWBR=0;
sfrb TWSR=1;
sfrb TWAR=2;
sfrb TWDR=3;
sfrb ADCL=4;
sfrb ADCH=5;
sfrw ADCW=4;      // 16 bit access
sfrb ADCSRA=6;
sfrb ADMUX=7;
sfrb ACSR=8;
sfrb UBRRL=9;
sfrb UCSRB=0xa;
sfrb UCSRA=0xb;
sfrb UDR=0xc;
sfrb SPCR=0xd;
sfrb SPSR=0xe;
sfrb SPDR=0xf;
sfrb PIND=0x10;
sfrb DDRD=0x11;
sfrb PORTD=0x12;
sfrb PINC=0x13;
sfrb DDRC=0x14;
sfrb PORTC=0x15;
sfrb PINB=0x16;
sfrb DDRB=0x17;
sfrb PORTB=0x18;
sfrb PINA=0x19;
sfrb DDRA=0x1a;
sfrb PORTA=0x1b;
sfrb EECR=0x1c;
sfrb EEDR=0x1d;
sfrb EEARL=0x1e;
sfrb EEARH=0x1f;
sfrw EEAR=0x1e;   // 16 bit access
sfrb UBRRH=0x20;
sfrb UCSRC=0X20;
sfrb WDTCR=0x21;
sfrb ASSR=0x22;
sfrb OCR2=0x23;
sfrb TCNT2=0x24;
sfrb TCCR2=0x25;
sfrb ICR1L=0x26;
sfrb ICR1H=0x27;
sfrb OCR1BL=0x28;
sfrb OCR1BH=0x29;
sfrw OCR1B=0x28;  // 16 bit access
sfrb OCR1AL=0x2a;
sfrb OCR1AH=0x2b;
sfrw OCR1A=0x2a;  // 16 bit access
sfrb TCNT1L=0x2c;
sfrb TCNT1H=0x2d;
sfrw TCNT1=0x2c;  // 16 bit access
sfrb TCCR1B=0x2e;
sfrb TCCR1A=0x2f;
sfrb SFIOR=0x30;
sfrb OSCCAL=0x31;
sfrb OCDR=0x31;
sfrb TCNT0=0x32;
sfrb TCCR0=0x33;
sfrb MCUCSR=0x34;
sfrb MCUCR=0x35;
sfrb TWCR=0x36;
sfrb SPMCR=0x37;
sfrb TIFR=0x38;
sfrb TIMSK=0x39;
sfrb GIFR=0x3a;
sfrb GICR=0x3b;
sfrb OCR0=0X3c;
sfrb SPL=0x3d;
sfrb SPH=0x3e;
sfrb SREG=0x3f;
#pragma used-

// Interrupt vectors definitions



// Alphanumeric LCD Module functions
#asm
   .equ __lcd_port=0x15
#endasm
/* LCD driver routines

  CodeVisionAVR C Compiler
  (C) 1998-2003 Pavel Haiduc, HP InfoTech S.R.L.

  BEFORE #include -ING THIS FILE YOU
  MUST DECLARE THE I/O ADDRESS OF THE
  DATA REGISTER OF THE PORT AT WHICH
  THE LCD IS CONNECTED!

  EXAMPLE FOR PORTB:

    #asm
        .equ __lcd_port=0x18
    #endasm
    #include <lcd.h>

*/


#pragma used+

void _lcd_ready(void);
void _lcd_write_data(unsigned char data);
// write a byte to the LCD character generator or display RAM
void lcd_write_byte(unsigned char addr, unsigned char data);
// read a byte from the LCD character generator or display RAM
unsigned char lcd_read_byte(unsigned char addr);
// set the LCD display position  x=0..39 y=0..3
void lcd_gotoxy(unsigned char x, unsigned char y);
// clear the LCD
void lcd_clear(void);
void lcd_putchar(char c);
// write the string str located in SRAM to the LCD
void lcd_puts(char *str);
// write the string str located in FLASH to the LCD
void lcd_putsf(char flash *str);
// initialize the LCD controller
unsigned char lcd_init(unsigned char lcd_columns);

#pragma used-
#pragma library lcd.lib



typedef unsigned char byte;

/* table for the user defined character */
flash byte char0[8]={		// 天的字型
0b0011111,
0b0000100,
0b0000100,
0b0011111,
0b0000100,
0b0000100,
0b0001010,
0b0010001};
flash byte char1[8]={		// 向的字型
0b0000100,
0b0001000,
0b0011111,
0b0010001,
0b0011111,
0b0011011,
0b0011111,
0b0010001};
flash byte char2[8]={		// 上的字型
0b0000100,
0b0000100,
0b0000111,
0b0000100,
0b0000100,
0b0000100,
0b0000100,
0b0011111};

/* function used to define user characters */
void define_char(byte flash *pc,byte char_code)
{
	byte i,a;
	a=(char_code<<3) | 0x40;
	for (i=0; i<8; i++) lcd_write_byte(a++,*pc++);
}

void main(void)
{
	lcd_init(16);			// initialize the LCD for 2 lines & 16 columns

	define_char(char0,0);  // define user character 0
	define_char(char1,1);  // define user character 1
	define_char(char2,2);  // define user character 2
	lcd_clear();
	lcd_putsf("Demo_6_9.c");	// 第一行显示内容
	lcd_gotoxy(0,1);
	lcd_putsf("User define:");	// 第二行显示内容
	lcd_putchar(0);			    // 接在后面显示"天天向上"
	lcd_putchar(0);
	lcd_putchar(1);
	lcd_putchar(2);
	while (1);
}