os_cpu_c.c

UCOS-II FOR STM32F103XX 1 本程序是我自己移植

/*
*********************************************************************************************************
*                                               uC/OS-II
*                                         The Real-Time Kernel
*
*
*                             (c) Copyright 1992-2007, Micrium, Weston, FL
*                                          All Rights Reserved
*
*                                           Generic Cortex-M3 Port
*
* File      : OS_CPU_C.C
* Version   : V1.82
* By        : Jun Yao
* Email:    : [e-mail]
* For       : Cortex-M3
* Toolchain : Keil ARM
*********************************************************************************************************
*/

#define  OS_CPU_GLOBALS
#include <ucos_ii.h>

/*$PAGE*/

/*
*********************************************************************************************************
*                                        INITIALIZE A TASK'S STACK
*
* Description: This function is called by either OSTaskCreate() or OSTaskCreateExt() to initialize the
*              stack frame of the task being created.  This function is highly processor specific.
*
* Arguments  : task          is a pointer to the task code
*
*              p_arg         is a pointer to a user supplied data area that will be passed to the task
*                            when the task first executes.
*
*              ptos          is a pointer to the top of stack.  It is assumed that 'ptos' points to
*                            a 'free' entry on the task stack.  If OS_STK_GROWTH is set to 1 then
*                            'ptos' will contain the HIGHEST valid address of the stack.  Similarly, if
*                            OS_STK_GROWTH is set to 0, the 'ptos' will contains the LOWEST valid address
*                            of the stack.
*
*              opt           specifies options that can be used to alter the behavior of OSTaskStkInit().
*                            (see uCOS_II.H for OS_TASK_OPT_xxx).
*
* Returns    : Always returns the location of the new top-of-stack' once the processor registers have
*              been placed on the stack in the proper order.
*
* Note(s)    : 1) Interrupts are enabled when your task starts executing.
*              2) All tasks run in SVC mode.
*********************************************************************************************************
*/

OS_STK *OSTaskStkInit (void (*task)(void *p_arg), void *p_arg, OS_STK *ptos, INT16U opt)
{
    OS_STK *stk;
		
    opt       = opt;                                                    /* 'opt' is not used, prevent warning                       */
    stk       = (OS_STK *)(((INT32U)ptos) & ~0x3);                      /* Load stack pointer                                       */
	  *(--stk)  = (INT32U)0x21000000L;                                    /* xPSR */
		*(--stk)  = (INT32U)task;			                                      /* Entry Point */
    *(--stk)  = (INT32U)task;     				                              /* R14 (LR) */
    *(--stk)  = (INT32U)0x12121212L;                                    /* R12 */
		*(--stk)  = (INT32U)0x03030303L;                                    /* R3 */
    *(--stk)  = (INT32U)0x02020202L;                                    /* R2 */
    *(--stk)  = (INT32U)0x01010101L;                                    /* R1 */
    *(--stk)  = (INT32U)p_arg;                                          /* R0 : argument */

	  *(--stk)  = (INT32U)0xfffffff9L;                                    /* PC for pop */
    *(--stk)  = (INT32U)0x11111111L;                                    /* R11 */
    *(--stk)  = (INT32U)0x10101010L;                                    /* R10 */
    *(--stk)  = (INT32U)0x09090909L;                                    /* R9 */
    *(--stk)  = (INT32U)0x08080808L;                                    /* R8 */
		*(--stk)  = (INT32U)0x07070707L;                                    /* R7 */
		*(--stk)  = (INT32U)0x06060606L;                                    /* R6 */
    *(--stk)  = (INT32U)0x05050505L;                                    /* R5 */
    *(--stk)  = (INT32U)0x04040404L;                                    /* R4 */

		*(--stk)  = (INT32U)0x00000000L;                                    /* PRIMASK */
  
    return (stk);
}

/*
*********************************************************************************************************
*                                       OS INITIALIZATION HOOK
*                                            (BEGINNING)
*
* Description: This function is called by OSInit() at the beginning of OSInit().
*
* Arguments  : none
*
* Note(s)    : 1) Interrupts should be disabled during this call.
*********************************************************************************************************
*/
#if OS_CPU_HOOKS_EN > 0 && OS_VERSION > 203
void  OSInitHookBegin (void)
{
#if OS_APP_HOOKS_EN > 0
#endif
}
#endif

/*
*********************************************************************************************************
*                                       OS INITIALIZATION HOOK
*                                               (END)
*
* Description: This function is called by OSInit() at the end of OSInit().
*
* Arguments  : none
*
* Note(s)    : 1) Interrupts should be disabled during this call.
*********************************************************************************************************
*/
#if OS_CPU_HOOKS_EN > 0 && OS_VERSION > 203
void  OSInitHookEnd (void)
{
#if OS_APP_HOOKS_EN > 0
#endif
}
#endif

/*
*********************************************************************************************************
*                                          TASK CREATION HOOK
*
* Description: This function is called when a task is created.
*
* Arguments  : ptcb   is a pointer to the task control block of the task being created.
*
* Note(s)    : 1) Interrupts are disabled during this call.
*********************************************************************************************************
*/
#if OS_CPU_HOOKS_EN > 0
void  OSTaskCreateHook (OS_TCB *ptcb)
{
#if OS_APP_HOOKS_EN > 0
#endif
}
#endif


/*
*********************************************************************************************************
*                                           TASK DELETION HOOK
*
* Description: This function is called when a task is deleted.
*
* Arguments  : ptcb   is a pointer to the task control block of the task being deleted.
*
* Note(s)    : 1) Interrupts are disabled during this call.
*********************************************************************************************************
*/
#if OS_CPU_HOOKS_EN > 0
void  OSTaskDelHook (OS_TCB *ptcb)
{
#if OS_APP_HOOKS_EN > 0
#endif
}
#endif

/*
*********************************************************************************************************
*                                             IDLE TASK HOOK
*
* Description: This function is called by the idle task.  This hook has been added to allow you to do
*              such things as STOP the CPU to conserve power.
*
* Arguments  : none
*
* Note(s)    : 1) Interrupts are enabled during this call.
*********************************************************************************************************
*/
#if OS_CPU_HOOKS_EN > 0 && OS_VERSION >= 251
void  OSTaskIdleHook (void)
{
#if OS_APP_HOOKS_EN > 0
#endif
}
#endif

/*
*********************************************************************************************************
*                                           STATISTIC TASK HOOK
*
* Description: This function is called every second by uC/OS-II's statistics task.  This allows your
*              application to add functionality to the statistics task.
*
* Arguments  : none
*********************************************************************************************************
*/

#if OS_CPU_HOOKS_EN > 0
void  OSTaskStatHook (void)
{
#if OS_APP_HOOKS_EN > 0
#endif
}
#endif


/*
*********************************************************************************************************
*                                           TASK SWITCH HOOK
*
* Description: This function is called when a task switch is performed.  This allows you to perform other
*              operations during a context switch.
*
* Arguments  : none
*
* Note(s)    : 1) Interrupts are disabled during this call.
*              2) It is assumed that the global pointer 'OSTCBHighRdy' points to the TCB of the task that
*                 will be 'switched in' (i.e. the highest priority task) and, 'OSTCBCur' points to the
*                 task being switched out (i.e. the preempted task).
*********************************************************************************************************
*/
#if (OS_CPU_HOOKS_EN > 0) && (OS_TASK_SW_HOOK_EN > 0)
void  OSTaskSwHook (void)
{
#if OS_APP_HOOKS_EN > 0
#endif
}
#endif

/*
*********************************************************************************************************
*                                           OS_TCBInit() HOOK
*
* Description: This function is called by OS_TCBInit() after setting up most of the TCB.
*
* Arguments  : ptcb    is a pointer to the TCB of the task being created.
*
* Note(s)    : 1) Interrupts may or may not be ENABLED during this call.
*********************************************************************************************************
*/
#if OS_CPU_HOOKS_EN > 0 && OS_VERSION > 203
void  OSTCBInitHook (OS_TCB *ptcb)
{
#if OS_APP_HOOKS_EN > 0
#endif
}
#endif


/*
*********************************************************************************************************
*                                               TICK HOOK
*
* Description: This function is called every tick.
*
* Arguments  : none
*
* Note(s)    : 1) Interrupts may or may not be ENABLED during this call.
*********************************************************************************************************
*/
#if (OS_CPU_HOOKS_EN > 0) && (OS_TIME_TICK_HOOK_EN > 0)
void  OSTimeTickHook (void)
{
#if OS_APP_HOOKS_EN > 0
#endif
}
#endif