dig_func.c

8051单片机结合BU2614的PLL程序

#include "c8051f020.h"
#include "lcd.h"
#include "digital_radio.h"
//#include "string.h"

#define T_3MS 0xf533	//定时器延时3ms（system clock=22118400/2,定时器12分频）
#define T_0_8MS 0xfd1f	//定时器延时0.8ms（system clock=22118400/2,定时器12分频）
#define CONFIG_2614 0x8300

sbit CLK_2614  = P2^0;
sbit DATA_2614 = P2^1;
sbit EN_2614   = P2^2;

extern unsigned char code tble[10]={48,49,50,51,52,53,54,55,56,57};//0-9 ascii code

static bit Head_ok=0,Got=0;	 //head_ok=1:帧头正确,got=1:收齐四字节

static unsigned char val[4]=0;//四字节的红外键值


void Timer3_Init()
{
    TMR3CN   &=0xfb;	//关定时器3
    TMR3RL    = T_3MS;  //延时3ms
    TMR3      = T_3MS;
}

unsigned char   Wait_infrared()
{		
		unsigned char  keyvalue;
	    
      while(!Got);
      if(val[2]+val[3]==0xff)
      keyvalue=val[2];
      Got=0;
		
		return(keyvalue);	
}

/*即时输出并取出按键的实值*/
/* void Get_Letter(unsigned char x,unsigned char y,unsigned char *letter)
{
	unsigned char m,ascii,temp;
	unsigned char *let=letter;
	for(m=0;m<7;m++) letter[m]=0;
	clear1line(x);
	LCD_Goto(x,y);
	Delay1us(40);
	for(m=0;m<5;m++)
	{
			
			temp=Wait_infrared();

			ascii=tbel[temp];		
		   	if(temp==0x15)
			{
			 clear1line(x);
			 let-=1;
			 *let='\0';
			 LCD_Printf(x, y,letter);
			}
			else if(temp==0x14)	
			{
				*let='\0';
				break;
			}
			else if(ascii!=0x21)			
			{
			     clear1line(x);
				 *let=ascii;
			     LCD_Printf(x, y,letter);				//向LCD发送
				 let++;
			 }
	}
 } */

 void One_float_Dis(unsigned char x,unsigned char y,float flt_data)
 {
  unsigned char dec_data,dec[3],dp_data,i,temp_dec;
  temp_dec=dec_data=(unsigned char)flt_data;
  for(i=0;i<3;i++) 
     {
	  dec[2-i]=dec_data%10;
	  dec_data=dec_data/10;
	 }
  if(dec_data<100) i=1;
  else i=0;
  LCD_Goto(x,y);
  for(;i<3;i++)  LCD_WriteData(tble[dec[i]]);
  Delay1us(40);
  LCD_WriteData(0x2e);
  dp_data=(unsigned char)((flt_data-temp_dec+0.01)*10);
  LCD_WriteData(tble[dp_data]);
 }

void clear1line(unsigned char j)
{
 unsigned char i;
 LCD_Goto(j,1);
 for(i=0;i<16;i++) LCD_WriteData(0x20);
 Delay1ms(1);
}

void Radio_Send(unsigned int num)
{
 unsigned int conf=CONFIG_2614;
 unsigned char i,j,d;
 bit flag=0;
 CLK_2614=EN_2614=1;
 DATA_2614=1;
 for(d=0;d<200;d++) conf=num;
 for(j=0;j<2;j++)
  { 
   for(i=0;i<32;i++)
    {
     CLK_2614=~CLK_2614;
     if(flag==0) 
       {
	    DATA_2614=0x0001&conf;
	    conf=conf>>1;
	   }
	 for(d=0;d<200;d++);
	 flag=~flag;
     }
     conf=CONFIG_2614;
    }
 for(d=0;d<100;d++);
 EN_2614=0;
 for(d=0;d<200;d++) conf=CONFIG_2614;
}


void ex_interrupt() interrupt 19	 //下降沿中断，收到低电平开始 
{

if(!Head_ok)
 {
 EIE2&=0xdf;//关中断7
  P3IF&=0x7f;//清中断7的中断标志
  Timer3_Init();//定时器3初始化
  TMR3CN|=0x04;  //开定时器3
  }
 else 
 {
  while(P37==0&&TMR3CN<0x80);  //等待变高
  if(TMR3CN<0x80)
  {
   P3IF&=0x7f;//清中断7的中断标志 
   TMR3      = T_0_8MS;//延时0.8ms
   TMR3CN|=0x04;  //开定时器3
  }
 }
}

void T3_inter() interrupt 14
{
  static unsigned char i=0,n=0;
  static bit h=0; 
  unsigned int v;
  TMR3CN&=0x7f;  //清中断标志

 if(Head_ok==0&&h==0&&P37==0) h=1; //开始后第一个3ms处应为低
 else if(Head_ok==0&&h==1&&P37==1) // 开始后第二个3ms处应为高
 {
  EIE2|=0x20; //开中断7
  TMR3CN&=0xfb;	//关定时器3
  h=0;Head_ok=1;return;
 }
 else if(Head_ok)
   {
      TMR3CN&=0xfb;	//关定时器3
      n=i++/8;
    if(P37) 					 //每0.8ms读一次数据
        {
         val[n]=val[n]>>1;
         val[n]|=0x80;
        }
    else 
         val[n]=val[n]>>1;
//       n=++i/8;
    if(i==32)
       {
        i=0;n=0;Head_ok=0;
        EIE2&=0xdf;//关中断7
        for(v=0;v<60000;v++);	 //避开重复码
        EIE2|=0x20; //开中断7
        Got=1;
       }
    } 
 else 		//还原为最原始状态
 {
  EIE2|=0x20;//开中断7
  Timer3_Init();
  h=0;Got=0;Head_ok=0;
 } 
}