qthread_unix.cpp

奇趣公司比较新的qt/emd版本

void QThread::msleep(unsigned long msecs)
{
    struct timeval tv;
    gettimeofday(&tv, 0);
    struct timespec ti;

    ti.tv_nsec = (tv.tv_usec + (msecs % 1000) * 1000) * 1000;
    ti.tv_sec = tv.tv_sec + (msecs / 1000) + (ti.tv_nsec / 1000000000);
    ti.tv_nsec %= 1000000000;
    thread_sleep(&ti);
}

/*!
    Causes the current thread to sleep for \a usecs microseconds.

    \sa sleep(), msleep()
*/
void QThread::usleep(unsigned long usecs)
{
    struct timeval tv;
    gettimeofday(&tv, 0);
    struct timespec ti;

    ti.tv_nsec = (tv.tv_usec + (usecs % 1000000)) * 1000;
    ti.tv_sec = tv.tv_sec + (usecs / 1000000) + (ti.tv_nsec / 1000000000);
    ti.tv_nsec %= 1000000000;
    thread_sleep(&ti);
}

/*!
    Begins execution of the thread by calling run(), which should be
    reimplemented in a QThread subclass to contain your code. The
    operating system will schedule the thread according to the \a
    priority parameter. If the thread is already running, this
    function does nothing.

    \sa run(), terminate()
*/
void QThread::start(Priority priority)
{
    Q_D(QThread);
    QMutexLocker locker(&d->mutex);
    if (d->running)
        return;

    d->running = true;
    d->finished = false;
    d->terminated = false;

    pthread_attr_t attr;
    pthread_attr_init(&attr);
    pthread_attr_setdetachstate(&attr, PTHREAD_CREATE_DETACHED);

    d->priority = priority;

#if defined(Q_OS_DARWIN) || !defined(Q_OS_OPENBSD) && defined(_POSIX_THREAD_PRIORITY_SCHEDULING) && (_POSIX_THREAD_PRIORITY_SCHEDULING-0 >= 0)
    switch (priority) {
    case InheritPriority:
        {
            pthread_attr_setinheritsched(&attr, PTHREAD_INHERIT_SCHED);
            break;
        }

    default:
        {
            int sched_policy;
            if (pthread_attr_getschedpolicy(&attr, &sched_policy) != 0) {
                // failed to get the scheduling policy, don't bother
                // setting the priority
                qWarning("QThread::start: Cannot determine default scheduler policy");
                break;
            }

            int prio_min = sched_get_priority_min(sched_policy);
            int prio_max = sched_get_priority_max(sched_policy);
            if (prio_min == -1 || prio_max == -1) {
                // failed to get the scheduling parameters, don't
                // bother setting the priority
                qWarning("QThread::start: Cannot determine scheduler priority range");
                break;
            }

            int prio;
            switch (priority) {
            case IdlePriority:
                prio = prio_min;
                break;

            case TimeCriticalPriority:
                prio = prio_max;
                break;

            default:
                // crudely scale our priority enum values to the prio_min/prio_max
                prio = (((prio_max - prio_min) / TimeCriticalPriority) * priority) + prio_min;
                prio = qMax(prio_min, qMin(prio_max, prio));
                break;
            }

            sched_param sp;
            sp.sched_priority = prio;

            if (pthread_attr_setinheritsched(&attr, PTHREAD_EXPLICIT_SCHED) != 0
                || pthread_attr_setschedpolicy(&attr, sched_policy) != 0
                || pthread_attr_setschedparam(&attr, &sp) != 0) {
                // could not set scheduling hints, fallback to inheriting them
                pthread_attr_setinheritsched(&attr, PTHREAD_INHERIT_SCHED);
            }
            break;
        }
    }
#endif // _POSIX_THREAD_PRIORITY_SCHEDULING

    if (d->stackSize > 0) {
#if defined(_POSIX_THREAD_ATTR_STACKSIZE) && (_POSIX_THREAD_ATTR_STACKSIZE-0 > 0)
        int code = pthread_attr_setstacksize(&attr, d->stackSize);
#else
        int code = ENOSYS; // stack size not supported, automatically fail
#endif // _POSIX_THREAD_ATTR_STACKSIZE

        if (code) {
            qWarning("QThread::start: Thread stack size error: %s",
                     qPrintable(qt_error_string(code)));

            // we failed to set the stacksize, and as the documentation states,
            // the thread will fail to run...
            d->running = false;
            d->finished = false;
            return;
        }
    }

    int code =
        pthread_create(&d->thread_id, &attr, QThreadPrivate::start, this);
    if (code == EPERM) {
        // caller does not have permission to set the scheduling
        // parameters/policy
        pthread_attr_setinheritsched(&attr, PTHREAD_INHERIT_SCHED);
        code =
            pthread_create(&d->thread_id, &attr, QThreadPrivate::start, this);
    }

    pthread_attr_destroy(&attr);

    if (code) {
        qWarning("QThread::start: Thread creation error: %s", qPrintable(qt_error_string(code)));

        d->running = false;
        d->finished = false;
        d->thread_id = 0;
    }
}

/*!
    Terminates the execution of the thread. The thread may or may not
    be terminated immediately, depending on the operating systems
    scheduling policies. Use QThread::wait() after terminate() for
    synchronous termination.

    When the thread is terminated, all threads waiting for the thread
    to finish will be woken up.

    \warning This function is dangerous and its use is discouraged.
    The thread can be terminate at any point in its code path.
    Threads can be terminated while modifying data. There is no
    chance for the thread to cleanup after itself, unlock any held
    mutexes, etc. In short, use this function only if absolutely
    necessary.

    Termination can be explicitly enabled or disabled by calling
    QThread::setTerminationEnabled(). Calling this function while
    termination is disabled results in the termination being
    deferred, until termination is re-enabled. See the documentation
    of QThread::setTerminationEnabled() for more information.

    \sa setTerminationEnabled()
*/
void QThread::terminate()
{
    Q_D(QThread);
    QMutexLocker locker(&d->mutex);

    if (!d->thread_id)
        return;

    int code = pthread_cancel(d->thread_id);
    if (code) {
        qWarning("QThread::start: Thread termination error: %s",
                 qPrintable(qt_error_string((code))));
    } else {
        d->terminated = true;
    }
}

/*!
    Blocks the thread until either of these conditions is met:

    \list
    \o The thread associated with this QThread object has finished
       execution (i.e. when it returns from \l{run()}). This function
       will return true if the thread has finished. It also returns
       true if the thread has not been started yet.
    \o \a time milliseconds has elapsed. If \a time is ULONG_MAX (the
        default), then the wait will never timeout (the thread must
        return from \l{run()}). This function will return false if the
        wait timed out.
    \endlist

    This provides similar functionality to the POSIX \c
    pthread_join() function.

    \sa sleep(), terminate()
*/
bool QThread::wait(unsigned long time)
{
    Q_D(QThread);
    QMutexLocker locker(&d->mutex);

    if (d->thread_id == pthread_self()) {
        qWarning("QThread::wait: Thread tried to wait on itself");
        return false;
    }

    if (d->finished || !d->running)
        return true;

    while (d->running) {
        if (!d->thread_done.wait(locker.mutex(), time))
            return false;
    }
    return true;
}

/*!
    Enables or disables termination of the current thread based on the
    \a enabled parameter. The thread must have been started by
    QThread.

    When \a enabled is false, termination is disabled.  Future calls
    to QThread::terminate() will return immediately without effect.
    Instead, the termination is deferred until termination is enabled.

    When \a enabled is true, termination is enabled.  Future calls to
    QThread::terminate() will terminate the thread normally.  If
    termination has been deferred (i.e. QThread::terminate() was
    called with termination disabled), this function will terminate
    the calling thread \e immediately.  Note that this function will
    not return in this case.

    \sa terminate()
*/
void QThread::setTerminationEnabled(bool enabled)
{
    Q_ASSERT_X(currentThread() != 0, "QThread::setTerminationEnabled()",
               "Current thread was not started with QThread.");
    pthread_setcancelstate(enabled ? PTHREAD_CANCEL_ENABLE : PTHREAD_CANCEL_DISABLE, NULL);
    if (enabled)
        pthread_testcancel();
}

void QThread::setPriority(Priority priority)
{
    Q_D(QThread);
    QMutexLocker locker(&d->mutex);
    if (!d->running) {
        qWarning("QThread::setPriority: Cannot set priority, thread is not running");
        return;
    }

    d->priority = priority;

    // copied from start() with a few modifications:

#if defined(Q_OS_DARWIN) || !defined(Q_OS_OPENBSD) && defined(_POSIX_THREAD_PRIORITY_SCHEDULING) && (_POSIX_THREAD_PRIORITY_SCHEDULING-0 >= 0)
    int sched_policy;
    sched_param param;

    if (pthread_getschedparam(d->thread_id, &sched_policy, &param) != 0) {
        // failed to get the scheduling policy, don't bother setting
        // the priority
        qWarning("QThread::setPriority: Cannot get scheduler parameters");
        return;
    }

    int prio_min = sched_get_priority_min(sched_policy);
    int prio_max = sched_get_priority_max(sched_policy);
    if (prio_min == -1 || prio_max == -1) {
        // failed to get the scheduling parameters, don't
        // bother setting the priority
        qWarning("QThread::setPriority: Cannot determine scheduler priority range");
        return;
    }

    int prio;
    switch (priority) {
    case InheritPriority:
        qWarning("QThread::setPriority: Argument cannot be InheritPriority");
        return;

    case IdlePriority:
        prio = prio_min;
        break;

    case TimeCriticalPriority:
        prio = prio_max;
        break;

    default:
        // crudely scale our priority enum values to the prio_min/prio_max
        prio = (((prio_max - prio_min) / TimeCriticalPriority) * priority) + prio_min;
        prio = qMax(prio_min, qMin(prio_max, prio));
        break;
    }

    param.sched_priority = prio;
    pthread_setschedparam(d->thread_id, sched_policy, &param);
#endif
}

#endif // QT_NO_THREAD