qsemaphore.cpp

奇趣公司比较新的qt/emd版本

/****************************************************************************
**
** Copyright (C) 1992-2007 Trolltech ASA. All rights reserved.
**
** This file is part of the QtCore module of the Qt Toolkit.
**
** This file may be used under the terms of the GNU General Public
** License version 2.0 as published by the Free Software Foundation
** and appearing in the file LICENSE.GPL included in the packaging of
** this file.  Please review the following information to ensure GNU
** General Public Licensing requirements will be met:
** http://trolltech.com/products/qt/licenses/licensing/opensource/
**
** If you are unsure which license is appropriate for your use, please
** review the following information:
** http://trolltech.com/products/qt/licenses/licensing/licensingoverview
** or contact the sales department at [e-mail].
**
** In addition, as a special exception, Trolltech gives you certain
** additional rights. These rights are described in the Trolltech GPL
** Exception version 1.0, which can be found at
** http://www.trolltech.com/products/qt/gplexception/ and in the file
** GPL_EXCEPTION.txt in this package.
**
** In addition, as a special exception, Trolltech, as the sole copyright
** holder for Qt Designer, grants users of the Qt/Eclipse Integration
** plug-in the right for the Qt/Eclipse Integration to link to
** functionality provided by Qt Designer and its related libraries.
**
** Trolltech reserves all rights not expressly granted herein.
**
** This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
** WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
**
****************************************************************************/

#include "qsemaphore.h"

#ifndef QT_NO_THREAD
#include "qmutex.h"
#include "qwaitcondition.h"

/*!
    \class QSemaphore
    \brief The QSemaphore class provides a general counting semaphore.

    \threadsafe

    \ingroup thread
    \ingroup environment

    A semaphore is a generalization of a mutex. While a mutex can
    only be locked once, it's possible to acquire a semaphore
    multiple times. Semaphores are typically used to protect a
    certain number of identical resources.

    Semaphores support two fundamental operations, acquire() and
    release():

    \list
    \o acquire(\e{n}) tries to acquire \e n resources. If there aren't
       that many resources available, the call will block until this
       is the case.
    \o release(\e{n}) releases \e n resources.
    \endlist

    There's also a tryAcquire() function that returns immediately if
    it cannot acquire the resources, and an available() function that
    returns the number of available resources at any time.

    Example:

    \code
        QSemaphore sem(5);      // sem.available() == 5

        sem.acquire(3);         // sem.available() == 2
        sem.acquire(2);         // sem.available() == 0
        sem.release(5);         // sem.available() == 5
        sem.release(5);         // sem.available() == 10

        sem.tryAcquire(1);      // sem.available() == 9, returns true
        sem.tryAcquire(250);    // sem.available() == 9, returns false
    \endcode

    A typical application of semaphores is for controlling access to
    a circular buffer shared by a producer thread and a consumer
    thread. The \l{threads/semaphores}{Semaphores} example shows how
    to use QSemaphore to solve that problem.

    A non-computing example of a semaphore would be dining at a
    restaurant. A semaphore is initialized with the number of chairs
    in the restaurant. As people arrive, they want a seat. As seats
    are filled, available() is decremented. As people leave, the
    available() is incremented, allowing more people to enter. If a
    party of 10 people want to be seated, but there are only 9 seats,
    those 10 people will wait, but a party of 4 people would be
    seated (taking the available seats to 5, making the party of 10
    people wait longer).

    \sa QMutex, QWaitCondition, QThread, {Semaphores Example}
*/

class QSemaphorePrivate {
public:
    inline QSemaphorePrivate(int n) : avail(n) { }

    QMutex mutex;
    QWaitCondition cond;

    int avail;
};

/*!
    Creates a new semaphore and initializes the number of resources
    it guards to \a n (by default, 0).

    \sa release(), available()
*/
QSemaphore::QSemaphore(int n)
{
    Q_ASSERT_X(n >= 0, "QSemaphore", "parameter 'n' must be non-negative");
    d = new QSemaphorePrivate(n);
}

/*!
    Destroys the semaphore.

    \warning Destroying a semaphore that is in use may result in
    undefined behavior.
*/
QSemaphore::~QSemaphore()
{ delete d; }

/*!
    Tries to acquire \c n resources guarded by the semaphore. If \a n
    > available(), this call will block until enough resources are
    available.

    \sa release(), available(), tryAcquire()
*/
void QSemaphore::acquire(int n)
{
    Q_ASSERT_X(n >= 0, "QSemaphore::acquire", "parameter 'n' must be non-negative");
    QMutexLocker locker(&d->mutex);
    while (n > d->avail)
        d->cond.wait(locker.mutex());
    d->avail -= n;
}

/*!
    Releases \a n resources guarded by the semaphore.

    This function can be used to "create" resources as well. For
    example:

    \code
        QSemaphore sem(5);      // a semaphore that guards 5 resources
        sem.acquire(5);         // acquire all 5 resources
        sem.release(5);         // release the 5 resources
        sem.release(10);        // "create" 10 new resources
    \endcode

    \sa acquire(), available()
*/
void QSemaphore::release(int n)
{
    Q_ASSERT_X(n >= 0, "QSemaphore::release", "parameter 'n' must be non-negative");
    QMutexLocker locker(&d->mutex);
    d->avail += n;
    d->cond.wakeAll();
}

/*!
    Returns the number of resources currently available to the
    semaphore. This number can never be negative.

    \sa acquire(), release()
*/
int QSemaphore::available() const
{
    QMutexLocker locker(&d->mutex);
    return d->avail;
}

/*!
    Tries to acquire \c n resources guarded by the semaphore and
    returns true on success. If available() < \a n, this call
    immediately returns false without acquiring any resources.

    Example:

    \code
        QSemaphore sem(5);      // sem.available() == 5
        sem.tryAcquire(250);    // sem.available() == 5, returns false
        sem.tryAcquire(3);      // sem.available() == 2, returns true
    \endcode

    \sa acquire()
*/
bool QSemaphore::tryAcquire(int n)
{
    Q_ASSERT_X(n >= 0, "QSemaphore::tryAcquire", "parameter 'n' must be non-negative");
    QMutexLocker locker(&d->mutex);
    if (n > d->avail)
        return false;
    d->avail -= n;
    return true;
}

/*!
    Tries to acquire \c n resources guarded by the semaphore and
    returns true on success. If available() < \a n, this call will
    wait for at most \a timeout milliseconds for resources to become
    available.

    Note: Passing a negative number as the \a timeout is equivalent to
    calling acquire(), i.e. this function will wait forever for
    resources to become available if \a timeout is negative.

    Example:

    \code
        QSemaphore sem(5);            // sem.available() == 5
        sem.tryAcquire(250, 1000);    // sem.available() == 5, waits 1000 milliseconds and returns false
        sem.tryAcquire(3, 30000);     // sem.available() == 2, returns true without waiting
    \endcode

    \sa acquire()
*/
bool QSemaphore::tryAcquire(int n, int timeout)
{
    Q_ASSERT_X(n >= 0, "QSemaphore::tryAcquire", "parameter 'n' must be non-negative");
    QMutexLocker locker(&d->mutex);
    if (timeout < 0) {
        while (n > d->avail)
            d->cond.wait(locker.mutex());
    } else {
        while (n > d->avail) {
            if (!d->cond.wait(locker.mutex(), timeout))
                return false;
        }
    }
    d->avail -= n;
    return true;


}

#endif // QT_NO_THREAD