msp430x54x_of_lfxt1_nmi.c

MSP430F5系列TI官方源码

//******************************************************************************
//  msp430FG5438 Demo - LFXT1 Oscillator Fault Detection
//
//  Description: System runs normally in LPM3 with with basic timer clocked by
//  32kHz ACLK with a 1 second interrupt. P1.0 is normally toggled every
//  1 second inside basic timer interrupt. If an LFXT1 oscillator fault occurs,
//  NMI is requested forcing exit from LPM3. P1.0 is toggled rapidly by
//  software as long as LFXT1 oscillator fault is present. Assuumed only
//  LFXT1 as NMI source - code does not check for other NMI sources.
//  ACLK = LFXT1 = 32768Hz, MCLK = SMCLK = default DCO = 32 x ACLK = 1048576Hz
//  //* An external watch crystal between XIN & XOUT is required for ACLK *//	
//
//
//           msp430FG5438
//        -----------------
//    /|\ |              XIN|-
//     |  |                 | 32kHz
//     ---|RST          XOUT|-
//        |                 |
//        |             P1.0|-->LED
//
//   M Smertneck
//   Texas Instruments Inc.
//   April 2008
//   Built with CCEv3.2 IAR Embedded Workbench Version: 3.42A
//******************************************************************************

#include <msp430x54x.h>

volatile unsigned int i;

void main(void)
{
  WDTCTL = WDTPW + WDTHOLD;                 // Stop WDT

  P1DIR |= BIT0;                            // P1.0 output

  RTCCTL01 = RTCTEV_3;
  RTCPS0CTL = RT0PSDIV_7;                   // Set RTPS0 to /256
  RTCPS1CTL = RT1IP_6 + RT1PSIE + RT1SSEL_3;// Set RT1IP to /4, enable
                                            // RT1PS interrupt and select
                                            // RTOPS output as clock
  _BIS_SR(LPM3_bits + GIE);                 // Enter LPM3, enable interrupts

  while(1) {
    _BIS_SR(LPM3_bits + GIE);
    P1OUT ^= BIT0;                          // Toggle P1.0 using exclusive-OR
  }
}


// RTC Interrupt Service Routine
#pragma vector=RTC_VECTOR
__interrupt void RTC_ISR(void)
{
  P1OUT ^= 0x01;                            // Toggle P1.0
  RTCCTL01 &= ~RTCTEVIFG;
  RTCPS1CTL &= ~RT1PSIFG;
}

#pragma vector=SYSNMI_VECTOR
__interrupt void nmi_ (void)
{
  do
  {
    SFRIFG1 &= ~OFIFG;                      // Clear OSC Fault flag
    for (i = 0x47FF; i > 0; i--);           // Time for flag to set
    P1OUT ^= BIT0;                          // Toggle P1.0 using exclusive-OR
  }
  
  while ( (SFRIFG1 &OFIFG));
  {    
    UCSCTL7 &= ~(XT1LFOFFG + DCOFFG);
    SFRIFG1 &= ~OFIFG;
  }                   
}