nand_read.c

U－Boot 1.3.1修改后的源码.1马

#include <config.h>

#define __REGb(x) (*(volatile unsigned char *)(x))
#define __REGi(x) (*(volatile unsigned int *)(x))
#define NF_BASE 0x4e000000


#if defined(CONFIG_S3C2440)

#define NFCONF __REGi(NF_BASE + 0x0)
#define NFCONT __REGi(NF_BASE + 0x4)
#define NFCMD __REGb(NF_BASE + 0x8)
#define NFADDR __REGb(NF_BASE + 0xC)
#define NFDATA __REGb(NF_BASE + 0x10)
#define NFSTAT __REGb(NF_BASE + 0x20)

//#define GPDAT        __REGi(GPIO_CTL_BASE+oGPIO_F+oGPIO_DAT)

#define NAND_CHIP_ENABLE (NFCONT &= ~(1<<1))
#define NAND_CHIP_DISABLE (NFCONT |= (1<<1))
#define NAND_CLEAR_RB (NFSTAT |= (1<<2))
#define NAND_DETECT_RB { while(! (NFSTAT&(1<<2)));}

#define BUSY 4
inline void wait_idle(void) {
	while(!(NFSTAT & BUSY));
	NFSTAT |= BUSY;
}

#define NAND_SECTOR_SIZE 512
#define NAND_BLOCK_MASK (NAND_SECTOR_SIZE - 1)

/* low level nand read function */
int
nand_read_ll(unsigned char *buf, unsigned long start_addr, int size)
{
	int i, j;
	
	if ((start_addr & NAND_BLOCK_MASK) || (size & NAND_BLOCK_MASK)) {
	return -1;	/* invalid alignment */
	}
	
	NAND_CHIP_ENABLE;
		
	for(i=start_addr; i < (start_addr + size);) {
	/* READ0 */
		NAND_CLEAR_RB;	
		NFCMD = 0;	
	
		/* Write Address */
		NFADDR = i & 0xff;
		NFADDR = (i >> 9) & 0xff;
		NFADDR = (i >> 17) & 0xff;
		NFADDR = (i >> 25) & 0xff;
	
		NAND_DETECT_RB;
	
		for(j=0; j < NAND_SECTOR_SIZE; j++, i++) {
		*buf = (NFDATA & 0xff);
		buf++;
		}
	}
	NAND_CHIP_DISABLE;	
	return 0;
} 
#endif

#if defined(CONFIG_S3C2410)

#define NFCONF __REGi(NF_BASE + 0x0)
#define NFCMD __REGb(NF_BASE + 0x4)
#define NFADDR __REGb(NF_BASE + 0x8)
#define NFDATA __REGb(NF_BASE + 0xc)
#define NFSTAT __REGb(NF_BASE + 0x10)
#define BUSY 1

inline void wait_idle(void) {
	int i;
	while(!(NFSTAT & BUSY))
	for(i=0; i<10; i++);
}
/* low level nand read function */
int
nand_read_ll(unsigned char *buf, unsigned long start_addr, int size)
{
	int i, j;
	if ((start_addr & NAND_BLOCK_MASK) || (size & NAND_BLOCK_MASK)) {
	return -1;	/* invalid alignment */
	}
	/* chip Enable */
	NFCONF &= ~0x800;
	for(i=0; i<10; i++);
	for(i=start_addr; i < (start_addr + size);) {
	/* READ0 */
	NFCMD = 0;
	/* Write Address */
	NFADDR = i & 0xff;
	NFADDR = (i >> 9) & 0xff;
	NFADDR = (i >> 17) & 0xff;
	NFADDR = (i >> 25) & 0xff;
	wait_idle();
	for(j=0; j < NAND_SECTOR_SIZE; j++, i++) {
	*buf = (NFDATA & 0xff);
	buf++;
	}
	}
	/* chip Disable */
	NFCONF |= 0x800; /* chip disable */
	return 0;
}
#endif