tht_memory_map_defines.h

FreeScale imx21开发板Nand flash烧写程序

//#########################################		
//# SDHC1                                 #		
//# $1001_3000 to $1001_3FFF              #		
//#########################################		
#define SDHC1_BASE_ADDR	0x10013000	
#define SDHC1_STR_STP_CLK	(SDHC1_BASE_ADDR+0x00)	//  32bit sdhc1 control reg
#define SDHC1_STATUS	(SDHC1_BASE_ADDR+0x04)	//  32bit sdhc1 status reg
#define SDHC1_CLK_RATE	(SDHC1_BASE_ADDR+0x08)	//  32bit sdhc1 clock rate reg
#define SDHC1_CMD_DAT_CONT	(SDHC1_BASE_ADDR+0x0C)	//  32bit sdhc1 cmd/data control reg
#define SDHC1_RESPONSE_TO	(SDHC1_BASE_ADDR+0x10)	//  32bit sdhc1 response time out reg
#define SDHC1_READ_TO	(SDHC1_BASE_ADDR+0x14)	//  32bit sdhc1 read time out reg
#define SDHC1_BLK_LEN	(SDHC1_BASE_ADDR+0x18)	//  32bit sdhc1 block length reg
#define SDHC1_NOB	(SDHC1_BASE_ADDR+0x1C)	//  32bit sdhc1 number of blocks reg
#define SDHC1_REV_NO	(SDHC1_BASE_ADDR+0x20)	//  32bit sdhc1 revision number reg
#define SDHC1_INT_MASK	(SDHC1_BASE_ADDR+0x24)	//  32bit sdhc1 interrupt mask reg
#define SDHC1_CMD	(SDHC1_BASE_ADDR+0x28)	//  32bit sdhc1 command code reg
#define SDHC1_ARGH	(SDHC1_BASE_ADDR+0x2C)	//  32bit sdhc1 argument high reg
#define SDHC1_ARGL	(SDHC1_BASE_ADDR+0x30)	//  32bit sdhc1 argument low reg
#define SDHC1_RES_FIFO	(SDHC1_BASE_ADDR+0x34)	//  32bit sdhc1 response fifo reg
#define SDHC1_BUFFER_ACCESS	(SDHC1_BASE_ADDR+0x38)	//  32bit sdhc1 buffer access reg
		
//#########################################		
//# SDHC2                                 #		
//# $1001_4000 to $1001_4FFF              #		
//#########################################		
#define SDHC2_BASE_ADDR	0x10014000	
#define SDHC2_STR_STP_CLK	(SDHC2_BASE_ADDR+0x00)	//  32bit sdhc2 control reg 
#define SDHC2_STATUS	(SDHC2_BASE_ADDR+0x04)	//  32bit sdhc2 status reg
#define SDHC2_CLK_RATE	(SDHC2_BASE_ADDR+0x08)	//  32bit sdhc2 clock rate reg
#define SDHC2_CMD_DAT_CONT	(SDHC2_BASE_ADDR+0x0C)	//  32bit sdhc2 cmd/data control reg
#define SDHC2_RESPONSE_TO	(SDHC2_BASE_ADDR+0x10)	//  32bit sdhc2 response time out reg
#define SDHC2_READ_TO	(SDHC2_BASE_ADDR+0x14)	//  32bit sdhc2 read time out reg
#define SDHC2_BLK_LEN	(SDHC2_BASE_ADDR+0x18)	//  32bit sdhc2 block length reg
#define SDHC2_NOB	(SDHC2_BASE_ADDR+0x1C)	//  32bit sdhc2 number of blocks reg
#define SDHC2_REV_NO	(SDHC2_BASE_ADDR+0x20)	//  32bit sdhc2 revision number reg
#define SDHC2_INT_MASK	(SDHC2_BASE_ADDR+0x24)	//  32bit sdhc2 interrupt mask reg
#define SDHC2_CMD	(SDHC2_BASE_ADDR+0x28)	//  32bit sdhc2 command code reg
#define SDHC2_ARGH	(SDHC2_BASE_ADDR+0x2C)	//  32bit sdhc2 argument high reg
#define SDHC2_ARGL	(SDHC2_BASE_ADDR+0x30)	//  32bit sdhc2 argument low reg  
#define SDHC2_RES_FIFO	(SDHC2_BASE_ADDR+0x34)	//  32bit sdhc2 response fifo reg
#define SDHC2_BUFFER_ACCESS	(SDHC2_BASE_ADDR+0x38)	//  32bit sdhc2 buffer access reg
		
//#########################################		
//# GPIO                                  #		
//# $1001_5000 to $1001_5FFF              #		
//#########################################		
#define GPIOA_BASE_ADDR	0x10015000	
#define GPIOA_DDIR	(GPIOA_BASE_ADDR+0x00)	//  32bit gpio pta data direction reg
#define GPIOA_OCR1	(GPIOA_BASE_ADDR+0x04)	//  32bit gpio pta output config 1 reg
#define GPIOA_OCR2	(GPIOA_BASE_ADDR+0x08)	//  32bit gpio pta output config 2 reg
#define GPIOA_ICONFA1	(GPIOA_BASE_ADDR+0x0C)	//  32bit gpio pta input config A1 reg
#define GPIOA_ICONFA2	(GPIOA_BASE_ADDR+0x10)	//  32bit gpio pta input config A2 reg
#define GPIOA_ICONFB1	(GPIOA_BASE_ADDR+0x14)	//  32bit gpio pta input config B1 reg
#define GPIOA_ICONFB2	(GPIOA_BASE_ADDR+0x18)	//  32bit gpio pta input config B2 reg
#define GPIOA_DR	(GPIOA_BASE_ADDR+0x1C)	//  32bit gpio pta data reg
#define GPIOA_GIUS	(GPIOA_BASE_ADDR+0x20)	//  32bit gpio pta in use reg
#define GPIOA_SSR	(GPIOA_BASE_ADDR+0x24)	//  32bit gpio pta sample status reg
#define GPIOA_ICR1	(GPIOA_BASE_ADDR+0x28)	//  32bit gpio pta interrupt ctrl 1 reg
#define GPIOA_ICR2	(GPIOA_BASE_ADDR+0x2C)	//  32bit gpio pta interrupt ctrl 2 reg
#define GPIOA_IMR	(GPIOA_BASE_ADDR+0x30)	//  32bit gpio pta interrupt mask reg
#define GPIOA_ISR	(GPIOA_BASE_ADDR+0x34)	//  32bit gpio pta interrupt status reg
#define GPIOA_GPR	(GPIOA_BASE_ADDR+0x38)	//  32bit gpio pta general purpose reg
#define GPIOA_SWR	(GPIOA_BASE_ADDR+0x3C)	//  32bit gpio pta software reset reg
#define GPIOA_PUEN	(GPIOA_BASE_ADDR+0x40)	//  32bit gpio pta pull up enable reg
		
#define GPIOB_BASE_ADDR	0x10015100	
#define GPIOB_DDIR	(GPIOB_BASE_ADDR+0x00)	//  32bit gpio ptb data direction reg
#define GPIOB_OCR1	(GPIOB_BASE_ADDR+0x04)	//  32bit gpio ptb output config 1 reg
#define GPIOB_OCR2	(GPIOB_BASE_ADDR+0x08)	//  32bit gpio ptb output config 2 reg
#define GPIOB_ICONFA1	(GPIOB_BASE_ADDR+0x0C)	//  32bit gpio ptb input config A1 reg
#define GPIOB_ICONFA2	(GPIOB_BASE_ADDR+0x10)	//  32bit gpio ptb input config A2 reg
#define GPIOB_ICONFB1	(GPIOB_BASE_ADDR+0x14)	//  32bit gpio ptb input config B1 reg
#define GPIOB_ICONFB2	(GPIOB_BASE_ADDR+0x18)	//  32bit gpio ptb input config B2 reg
#define GPIOB_DR	(GPIOB_BASE_ADDR+0x1C)	//  32bit gpio ptb data reg
#define GPIOB_GIUS	(GPIOB_BASE_ADDR+0x20)	//  32bit gpio ptb in use reg
#define GPIOB_SSR	(GPIOB_BASE_ADDR+0x24)	//  32bit gpio ptb sample status reg
#define GPIOB_ICR1	(GPIOB_BASE_ADDR+0x28)	//  32bit gpio ptb interrupt ctrl 1 reg
#define GPIOB_ICR2	(GPIOB_BASE_ADDR+0x2C)	//  32bit gpio ptb interrupt ctrl 2 reg
#define GPIOB_IMR	(GPIOB_BASE_ADDR+0x30)	//  32bit gpio ptb interrupt mask reg
#define GPIOB_ISR	(GPIOB_BASE_ADDR+0x34)	//  32bit gpio ptb interrupt status reg
#define GPIOB_GPR	(GPIOB_BASE_ADDR+0x38)	//  32bit gpio ptb general purpose reg
#define GPIOB_SWR	(GPIOB_BASE_ADDR+0x3C)	//  32bit gpio ptb software reset reg 
#define GPIOB_PUEN	(GPIOB_BASE_ADDR+0x40)	//  32bit gpio ptb pull up enable reg
		
#define GPIOC_BASE_ADDR	0x10015200	
#define GPIOC_DDIR	(GPIOC_BASE_ADDR+0x00)	//  32bit gpio ptc data direction reg
#define GPIOC_OCR1	(GPIOC_BASE_ADDR+0x04)	//  32bit gpio ptc output config 1 reg
#define GPIOC_OCR2	(GPIOC_BASE_ADDR+0x08)	//  32bit gpio ptc output config 2 reg
#define GPIOC_ICONFA1	(GPIOC_BASE_ADDR+0x0C)	//  32bit gpio ptc input config A1 reg
#define GPIOC_ICONFA2	(GPIOC_BASE_ADDR+0x10)	//  32bit gpio ptc input config A2 reg
#define GPIOC_ICONFB1	(GPIOC_BASE_ADDR+0x14)	//  32bit gpio ptc input config B1 reg
#define GPIOC_ICONFB2	(GPIOC_BASE_ADDR+0x18)	//  32bit gpio ptc input config B2 reg
#define GPIOC_DR	(GPIOC_BASE_ADDR+0x1C)	//  32bit gpio ptc data reg
#define GPIOC_GIUS	(GPIOC_BASE_ADDR+0x20)	//  32bit gpio ptc in use reg
#define GPIOC_SSR	(GPIOC_BASE_ADDR+0x24)	//  32bit gpio ptc sample status reg
#define GPIOC_ICR1	(GPIOC_BASE_ADDR+0x28)	//  32bit gpio ptc interrupt ctrl 1 reg
#define GPIOC_ICR2	(GPIOC_BASE_ADDR+0x2C)	//  32bit gpio ptc interrupt ctrl 2 reg
#define GPIOC_IMR	(GPIOC_BASE_ADDR+0x30)	//  32bit gpio ptc interrupt mask reg
#define GPIOC_ISR	(GPIOC_BASE_ADDR+0x34)	//  32bit gpio ptc interrupt status reg
#define GPIOC_GPR	(GPIOC_BASE_ADDR+0x38)	//  32bit gpio ptc general purpose reg
#define GPIOC_SWR	(GPIOC_BASE_ADDR+0x3C)	//  32bit gpio ptc software reset reg 
#define GPIOC_PUEN	(GPIOC_BASE_ADDR+0x40)	//  32bit gpio ptc pull up enable reg
		
#define GPIOD_BASE_ADDR	0x10015300	
#define GPIOD_DDIR	(GPIOD_BASE_ADDR+0x00)	//  32bit gpio ptd data direction reg
#define GPIOD_OCR1	(GPIOD_BASE_ADDR+0x04)	//  32bit gpio ptd output config 1 reg
#define GPIOD_OCR2	(GPIOD_BASE_ADDR+0x08)	//  32bit gpio ptd output config 2 reg
#define GPIOD_ICONFA1	(GPIOD_BASE_ADDR+0x0C)	//  32bit gpio ptd input config A1 reg
#define GPIOD_ICONFA2	(GPIOD_BASE_ADDR+0x10)	//  32bit gpio ptd input config A2 reg
#define GPIOD_ICONFB1	(GPIOD_BASE_ADDR+0x14)	//  32bit gpio ptd input config B1 reg
#define GPIOD_ICONFB2	(GPIOD_BASE_ADDR+0x18)	//  32bit gpio ptd input config B2 reg
#define GPIOD_DR	(GPIOD_BASE_ADDR+0x1C)	//  32bit gpio ptd data reg
#define GPIOD_GIUS	(GPIOD_BASE_ADDR+0x20)	//  32bit gpio ptd in use reg
#define GPIOD_SSR	(GPIOD_BASE_ADDR+0x24)	//  32bit gpio ptd sample status reg
#define GPIOD_ICR1	(GPIOD_BASE_ADDR+0x28)	//  32bit gpio ptd interrupt ctrl 1 reg
#define GPIOD_ICR2	(GPIOD_BASE_ADDR+0x2C)	//  32bit gpio ptd interrupt ctrl 2 reg
#define GPIOD_IMR	(GPIOD_BASE_ADDR+0x30)	//  32bit gpio ptd interrupt mask reg
#define GPIOD_ISR	(GPIOD_BASE_ADDR+0x34)	//  32bit gpio ptd interrupt status reg
#define GPIOD_GPR	(GPIOD_BASE_ADDR+0x38)	//  32bit gpio ptd general purpose reg
#define GPIOD_SWR	(GPIOD_BASE_ADDR+0x3C)	//  32bit gpio ptd software reset reg 
#define GPIOD_PUEN	(GPIOD_BASE_ADDR+0x40)	//  32bit gpio ptd pull up enable reg
		
#define GPIOE_BASE_ADDR	0x10015400	
#define GPIOE_DDIR	(GPIOE_BASE_ADDR+0x00)	//  32bit gpio pte data direction reg
#define GPIOE_OCR1	(GPIOE_BASE_ADDR+0x04)	//  32bit gpio pte output config 1 reg
#define GPIOE_OCR2	(GPIOE_BASE_ADDR+0x08)	//  32bit gpio pte output config 2 reg
#define GPIOE_ICONFA1	(GPIOE_BASE_ADDR+0x0C)	//  32bit gpio pte input config A1 reg
#define GPIOE_ICONFA2	(GPIOE_BASE_ADDR+0x10)	//  32bit gpio pte input config A2 reg
#define GPIOE_ICONFB1	(GPIOE_BASE_ADDR+0x14)	//  32bit gpio pte input config B1 reg
#define GPIOE_ICONFB2	(GPIOE_BASE_ADDR+0x18)	//  32bit gpio pte input config B2 reg
#define GPIOE_DR	(GPIOE_BASE_ADDR+0x1C)	//  32bit gpio pte data reg
#define GPIOE_GIUS	(GPIOE_BASE_ADDR+0x20)	//  32bit gpio pte in use reg
#define GPIOE_SSR	(GPIOE_BASE_ADDR+0x24)	//  32bit gpio pte sample status reg
#define GPIOE_ICR1	(GPIOE_BASE_ADDR+0x28)	//  32bit gpio pte interrupt ctrl 1 reg
#define GPIOE_ICR2	(GPIOE_BASE_ADDR+0x2C)	//  32bit gpio pte interrupt ctrl 2 reg
#define GPIOE_IMR	(GPIOE_BASE_ADDR+0x30)	//  32bit gpio pte interrupt mask reg
#define GPIOE_ISR	(GPIOE_BASE_ADDR+0x34)	//  32bit gpio pte interrupt status reg
#define GPIOE_GPR	(GPIOE_BASE_ADDR+0x38)	//  32bit gpio pte general purpose reg
#define GPIOE_SWR	(GPIOE_BASE_ADDR+0x3C)	//  32bit gpio pte software reset reg 
#define GPIOE_PUEN	(GPIOE_BASE_ADDR+0x40)	//  32bit gpio pte pull up enable reg
		
#define GPIOF_BASE_ADDR	0x10015500	
#define GPIOF_DDIR	(GPIOF_BASE_ADDR+0x00)	//  32bit gpio ptf data direction reg
#define GPIOF_OCR1	(GPIOF_BASE_ADDR+0x04)	//  32bit gpio ptf output config 1 reg
#define GPIOF_OCR2	(GPIOF_BASE_ADDR+0x08)	//  32bit gpio ptf output config 2 reg
#define GPIOF_ICONFA1	(GPIOF_BASE_ADDR+0x0C)	//  32bit gpio ptf input config A1 reg
#define GPIOF_ICONFA2	(GPIOF_BASE_ADDR+0x10)	//  32bit gpio ptf input config A2 reg
#define GPIOF_ICONFB1	(GPIOF_BASE_ADDR+0x14)	//  32bit gpio ptf input config B1 reg
#define GPIOF_ICONFB2	(GPIOF_BASE_ADDR+0x18)	//  32bit gpio ptf input config B2 reg
#define GPIOF_DR	(GPIOF_BASE_ADDR+0x1C)	//  32bit gpio ptf data reg
#define GPIOF_GIUS	(GPIOF_BASE_ADDR+0x20)	//  32bit gpio ptf in use reg
#define GPIOF_SSR	(GPIOF_BASE_ADDR+0x24)	//  32bit gpio ptf sample status reg
#define GPIOF_ICR1	(GPIOF_BASE_ADDR+0x28)	//  32bit gpio ptf interrupt ctrl 1 reg
#define GPIOF_ICR2	(GPIOF_BASE_ADDR+0x2C)	//  32bit gpio ptf interrupt ctrl 2 reg
#define GPIOF_IMR	(GPIOF_BASE_ADDR+0x30)	//  32bit gpio ptf interrupt mask reg
#define GPIOF_ISR	(GPIOF_BASE_ADDR+0x34)	//  32bit gpio ptf interrupt status reg
#define GPIOF_GPR	(GPIOF_BASE_ADDR+0x38)	//  32bit gpio ptf general purpose reg
#define GPIOF_SWR	(GPIOF_BASE_ADDR+0x3C)	//  32bit gpio ptf software reset reg 
#define GPIOF_PUEN	(GPIOF_BASE_ADDR+0x40)	//  32bit gpio ptf pull up enable reg
		
#define GPIO_REG_BASE	0x10015600	
#define GPIO_PMASK	(GPIO_REG_BASE+0x00)	//  32bit gpio interrupt mask reg
		
//#########################################		
//# AUDMUX                                #		
//# $1001_6000 to $1001_6FFF              #		
//#########################################		
#define AUDMUX_BASE_ADDR	0x10016000	
#define AUDMUX_HPCR1	(AUDMUX_BASE_ADDR+0x00)	//  32bit audmux host config reg 1
#define AUDMUX_HPCR2	(AUDMUX_BASE_ADDR+0x04)	//  32bit audmux host config reg 2
#define AUDMUX_HPCR3	(AUDMUX_BASE_ADDR+0x08)	//  32bit audmux host config reg 3
#define AUDMUX_PPCR1	(AUDMUX_BASE_ADDR+0x10)	//  32bit audmux pripheral config 1
#define AUDMUX_PPCR2	(AUDMUX_BASE_ADDR+0x14)	//  32bit audmux pripheral config 2
#define AUDMUX_PPCR3	(AUDMUX_BASE_ADDR+0x1C)	//  32bit audmux pripheral config 3
		
		
		
//#########################################		
//# AIPI2                                 #		
//# $1002_0000 to $1002_0FFF              #		
//#########################################		
#define AIPI2_BASE_ADDR	0x10020000	
#define AIPI2_PSR0	(AIPI2_BASE_ADDR+0x00)	//  32bit Peripheral Size Reg 0
#define AIPI2_PSR1	(AIPI2_BASE_ADDR+0x04)	//  32bit Peripheral Size Reg 1
#define AIPI2_PAR	(AIPI2_BASE_ADDR+0x08)	//  32bit Peripheral Access Reg
		
//#########################################		
//# LCDC                                  #		
//# $1002_1000 to $1002_1FFF              #		
//#########################################		
#define LCDC_BASE_ADDR	0x10021000	
#define LCDC_LSSAR	(LCDC_BASE_ADDR+0x00)	//  32bit lcdc screen start addr reg
#define LCDC_LSR	(LCDC_BASE_ADDR+0x04)	//  32bit lcdc size reg
#define LCDC_LVPWR	(LCDC_BASE_ADDR+0x08)	//  32bit lcdc virtual page width reg
#define LCDC_LCPR	(LCDC_BASE_ADDR+0x0C)	//  32bit lcd cursor position reg
#define LCDC_LCWHBR	(LCDC_BASE_ADDR+0x10)	//  32bit lcd cursor width/heigh/blink
#define LCDC_LCCMR	(LCDC_BASE_ADDR+0x14)	//  32bit lcd color cursor mapping reg
#define LCDC_LPCR	(LCDC_BASE_ADDR+0x18)	//  32bit lcdc panel config reg
#define LCDC_LHCR	(LCDC_BASE_ADDR+0x1C)	//  32bit lcdc horizontal config reg
#define LCDC_LVCR	(LCDC_BASE_ADDR+0x20)	//  32bit lcdc vertical config reg
#define LCDC_LPOR	(LCDC_BASE_ADDR+0x24)	//  32bit lcdc panning offset reg
#define LCDC_LSCR	(LCDC_BASE_ADDR+0x28)	//  32bit lcdc sharp config 1 reg
#define LCDC_LPCCR	(LCDC_BASE_ADDR+0x2C)	//  32bit lcdc pwm contrast ctrl reg
#define LCDC_LDCR	(LCDC_BASE_ADDR+0x30)	//  32bit lcdc dma control reg
#define LCDC_LRMCR	(LCDC_BASE_ADDR+0x34)	//  32bit lcdc refresh mode ctrl reg
#define LCDC_LICR	(LCDC_BASE_ADDR+0x38)	//  32bit lcdc interrupt config reg
#define LCDC_LIER	(LCDC_BASE_ADDR+0x3C)	//  32bit lcdc interrupt enable reg
#define LCDC_LISR	(LCDC_BASE_ADDR+0x40)	//  32bit lcdc interrupt status reg
#define LCDC_LGWSAR	(LCDC_BASE_ADDR+0x50)	//  32bit lcdc graphic win start add
#define LCDC_LGWSR	(LCDC_BASE_ADDR+0x54)	//  32bit lcdc graphic win size reg
#define LCDC_LGWVPWR	(LCDC_BASE_ADDR+0x58)	//  32bit lcdc graphic win virtual pg
#define LCDC_LGWPOR	(LCDC_BASE_ADDR+0x5C)	//  32bit lcdc graphic win pan offset
#define LCDC_LGWPR	(LCDC_BASE_ADDR+0x60)	//  32bit lcdc graphic win positon reg
#define LCDC_LGWCR	(LCDC_BASE_ADDR+0x64)	//  32bit lcdc graphic win control reg
#define LCDC_LGWDCR	(LCDC_BASE_ADDR+0x68)	//  32bit lcdc graphic win DMA control reg
		
#define LCDC_BPLUT_BASE	(LCDC_BASE_ADDR+0x800)	//  Background Plane LUT (800 - BFC)
#define LCDC_GWLUT_BASE	(LCDC_BASE_ADDR+0xC00)	//  Background Plane LUT (C00 - FFC)
		
//#########################################		
//# SLCDC                                 #