📄 config.in
字号:
## Character device configuration#mainmenu_option next_commentcomment 'Character devices'bool 'Virtual terminal' CONFIG_VTif [ "$CONFIG_VT" = "y" ]; then bool ' Support for console on virtual terminal' CONFIG_VT_CONSOLE if [ "$CONFIG_GSC_LASI" = "y" ]; then bool ' Support for Lasi/Dino PS2 port' CONFIG_GSC_PS2 fifitristate 'Standard/generic (8250/16550 and compatible UARTs) serial support' CONFIG_SERIALif [ "$CONFIG_SERIAL" = "y" ]; then bool ' Support for console on serial port' CONFIG_SERIAL_CONSOLE if [ "$CONFIG_GSC_LASI" = "y" ]; then bool ' serial port on GSC support' CONFIG_SERIAL_GSC fi if [ "$CONFIG_IA64" = "y" ]; then bool 'Support for serial console port described by EFI HCDP table' CONFIG_SERIAL_HCDP fi if [ "$CONFIG_ARCH_ACORN" = "y" ]; then tristate ' Atomwide serial port support' CONFIG_ATOMWIDE_SERIAL tristate ' Dual serial port support' CONFIG_DUALSP_SERIAL fifidep_mbool 'Extended dumb serial driver options' CONFIG_SERIAL_EXTENDED $CONFIG_SERIALif [ "$CONFIG_SERIAL_EXTENDED" = "y" ]; then bool ' Support more than 4 serial ports' CONFIG_SERIAL_MANY_PORTS bool ' Support for sharing serial interrupts' CONFIG_SERIAL_SHARE_IRQ bool ' Autodetect IRQ on standard ports (unsafe)' CONFIG_SERIAL_DETECT_IRQ bool ' Support special multiport boards' CONFIG_SERIAL_MULTIPORT bool ' Support the Bell Technologies HUB6 card' CONFIG_HUB6fibool 'Non-standard serial port support' CONFIG_SERIAL_NONSTANDARDif [ "$CONFIG_SERIAL_NONSTANDARD" = "y" ]; then tristate ' Computone IntelliPort Plus serial support' CONFIG_COMPUTONE tristate ' Comtrol Rocketport support' CONFIG_ROCKETPORT tristate ' Cyclades async mux support' CONFIG_CYCLADES if [ "$CONFIG_EXPERIMENTAL" = "y" -a "$CONFIG_CYCLADES" != "n" ]; then bool ' Cyclades-Z interrupt mode operation (EXPERIMENTAL)' CONFIG_CYZ_INTR fi if [ "$CONFIG_X86_64" != "y" ]; then tristate ' Digiboard Intelligent Async Support' CONFIG_DIGIEPCA if [ "$CONFIG_DIGIEPCA" = "n" ]; then tristate ' Digiboard PC/Xx Support' CONFIG_DIGI fi fi dep_tristate ' Hayes ESP serial port support' CONFIG_ESPSERIAL $CONFIG_ISA tristate ' Moxa Intellio support' CONFIG_MOXA_INTELLIO tristate ' Moxa SmartIO support' CONFIG_MOXA_SMARTIO if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then dep_tristate ' Multi-Tech multiport card support (EXPERIMENTAL)' CONFIG_ISI m fi tristate ' Microgate SyncLink card support' CONFIG_SYNCLINK tristate ' SyncLink Multiport support' CONFIG_SYNCLINKMP tristate ' HDLC line discipline support' CONFIG_N_HDLC tristate ' SDL RISCom/8 card support' CONFIG_RISCOM8 if [ "$CONFIG_X86_64" != "y" ]; then tristate ' Specialix IO8+ card support' CONFIG_SPECIALIX if [ "$CONFIG_SPECIALIX" != "n" ]; then bool ' Specialix DTR/RTS pin is RTS' CONFIG_SPECIALIX_RTSCTS fi tristate ' Specialix SX (and SI) card support' CONFIG_SX tristate ' Specialix RIO system support' CONFIG_RIO if [ "$CONFIG_RIO" != "n" ]; then bool ' Support really old RIO/PCI cards' CONFIG_RIO_OLDPCI fi fi bool ' Stallion multiport serial support' CONFIG_STALDRV if [ "$CONFIG_STALDRV" = "y" ]; then tristate ' Stallion EasyIO or EC8/32 support' CONFIG_STALLION tristate ' Stallion EC8/64, ONboard, Brumby support' CONFIG_ISTALLION fi if [ "$CONFIG_MIPS" = "y" ]; then bool ' TX3912/PR31700 serial port support' CONFIG_SERIAL_TX3912 dep_bool ' Console on TX3912/PR31700 serial port' CONFIG_SERIAL_TX3912_CONSOLE $CONFIG_SERIAL_TX3912 if [ "$CONFIG_CPU_AU1X00" = "y" ]; then bool ' Enable Au1x00 UART Support' CONFIG_AU1X00_UART if [ "$CONFIG_AU1X00_UART" = "y" ]; then bool ' Enable Au1x00 serial console' CONFIG_AU1X00_SERIAL_CONSOLE if [ "$CONFIG_AU1X00_SERIAL_CONSOLE" = "y" ]; then string ' Kernel parameter console=' CONFIG_AU1X00_SERIAL_CONSOLE_DEVICE ttyS0,115200 fi fi if [ "$CONFIG_AU1000_USB_DEVICE" = "y" ]; then dep_tristate ' Au1x00 USB TTY Device support' CONFIG_AU1X00_USB_TTY $CONFIG_AU1000_USB_DEVICE if [ "$CONFIG_AU1000_USB_TTY" != "y" ]; then dep_tristate ' Au1x00 USB Raw Device support' CONFIG_AU1X00_USB_RAW $CONFIG_AU1000_USB_DEVICE fi fi fi bool 'TXx927 SIO support' CONFIG_TXX927_SERIAL if [ "$CONFIG_TXX927_SERIAL" = "y" ]; then bool 'TXx927 SIO Console support' CONFIG_TXX927_SERIAL_CONSOLE fi if [ "$CONFIG_SIBYTE_SB1xxx_SOC" = "y" ]; then bool ' Support for BCM1xxx onchip DUART' CONFIG_SIBYTE_SB1250_DUART if [ "$CONFIG_SIBYTE_SB1250_DUART" = "y" ]; then bool ' Console on BCM1xxx DUART' CONFIG_SIBYTE_SB1250_DUART_CONSOLE if [ "$CONFIG_SIBYTE_SB1250_DUART_CONSOLE" = "y" ]; then define_bool CONFIG_SERIAL_CONSOLE y fi if [ "$CONFIG_REMOTE_DEBUG" = "y" ]; then define_bool CONFIG_SIBYTE_SB1250_DUART_NO_PORT_1 y fi fi fi fi if [ "$CONFIG_DECSTATION" = "y" ]; then bool ' DECstation serial support' CONFIG_SERIAL_DEC dep_bool ' Support for console on a DECstation serial port' CONFIG_SERIAL_DEC_CONSOLE $CONFIG_SERIAL_DEC dep_bool ' DZ11 serial support' CONFIG_DZ $CONFIG_SERIAL_DEC $CONFIG_MIPS32 dep_bool ' Z85C30 serial support' CONFIG_ZS $CONFIG_SERIAL_DEC $CONFIG_TC fifibool 'HTK AU110X PC-keyboard support' CONFIG_AU110X_PCKBDdep_tristate 'Hydrogen III Au1100 buttons support' CONFIG_MIPS_HYDIII_BUTTONS $CONFIG_MIPS_HYDIIIif [ "$CONFIG_EXPERIMENTAL" = "y" -a "$CONFIG_ZORRO" = "y" ]; then tristate 'Commodore A2232 serial support (EXPERIMENTAL)' CONFIG_A2232fiif [ "$CONFIG_FOOTBRIDGE" = "y" ]; then bool 'DC21285 serial port support' CONFIG_SERIAL_21285 if [ "$CONFIG_SERIAL_21285" = "y" ]; then if [ "$CONFIG_OBSOLETE" = "y" ]; then bool ' Use /dev/ttyS0 device (OBSOLETE)' CONFIG_SERIAL_21285_OLD fi bool ' Console on DC21285 serial port' CONFIG_SERIAL_21285_CONSOLE fi if [ "$CONFIG_PARISC" = "y" ]; then bool ' PDC software console support' CONFIG_PDC_CONSOLE fifiif [ "$CONFIG_MIPS_ITE8172" = "y" ]; then bool 'Enable Qtronix 990P Keyboard Support' CONFIG_QTRONIX_KEYBOARD if [ "$CONFIG_QTRONIX_KEYBOARD" = "y" ]; then define_bool CONFIG_IT8172_CIR y else bool ' Enable PS2 Keyboard Support' CONFIG_PC_KEYB fi bool 'Enable Smart Card Reader 0 Support ' CONFIG_IT8172_SCR0 bool 'Enable Smart Card Reader 1 Support ' CONFIG_IT8172_SCR1fiif [ "$CONFIG_MIPS_IVR" = "y" ]; then bool 'Enable Qtronix 990P Keyboard Support' CONFIG_QTRONIX_KEYBOARD if [ "$CONFIG_QTRONIX_KEYBOARD" = "y" ]; then define_bool CONFIG_IT8172_CIR y fi bool 'Enable Smart Card Reader 0 Support ' CONFIG_IT8172_SCR0fibool 'Unix98 PTY support' CONFIG_UNIX98_PTYSif [ "$CONFIG_UNIX98_PTYS" = "y" ]; then int 'Maximum number of Unix98 PTYs in use (0-2048)' CONFIG_UNIX98_PTY_COUNT 256fiif [ "$CONFIG_PARPORT" != "n" ]; then dep_tristate 'Parallel printer support' CONFIG_PRINTER $CONFIG_PARPORT if [ "$CONFIG_PRINTER" != "n" ]; then bool ' Support for console on line printer' CONFIG_LP_CONSOLE fi dep_tristate 'Support for user-space parallel port device drivers' CONFIG_PPDEV $CONFIG_PARPORTfiif [ "$CONFIG_PPC64" = "y" ] ; then bool 'pSeries Hypervisor Virtual Console support' CONFIG_HVC_CONSOLEfisource drivers/i2c/Config.inmainmenu_option next_commentcomment 'Mice'tristate 'Bus Mouse Support' CONFIG_BUSMOUSEif [ "$CONFIG_BUSMOUSE" != "n" ]; then dep_tristate ' ATIXL busmouse support' CONFIG_ATIXL_BUSMOUSE $CONFIG_BUSMOUSE dep_tristate ' Logitech busmouse support' CONFIG_LOGIBUSMOUSE $CONFIG_BUSMOUSE dep_tristate ' Microsoft busmouse support' CONFIG_MS_BUSMOUSE $CONFIG_BUSMOUSE if [ "$CONFIG_ADB" = "y" -a "$CONFIG_ADB_KEYBOARD" = "y" ]; then dep_tristate ' Apple Desktop Bus mouse support (old driver)' CONFIG_ADBMOUSE $CONFIG_BUSMOUSE fi# if [ "$CONFIG_DECSTATION" = "y" ]; then# dep_bool ' MAXINE Access.Bus mouse (VSXXX-BB/GB) support' CONFIG_DTOP_MOUSE $CONFIG_ACCESSBUS# fifitristate 'Mouse Support (not serial and bus mice)' CONFIG_MOUSEif [ "$CONFIG_MOUSE" != "n" ]; then bool ' PS/2 mouse (aka "auxiliary device") support' CONFIG_PSMOUSE tristate ' C&T 82C710 mouse port support (as on TI Travelmate)' CONFIG_82C710_MOUSE tristate ' PC110 digitizer pad support' CONFIG_PC110_PAD tristate ' MK712 touch screen support' CONFIG_MK712_MOUSEfiendmenusource drivers/char/joystick/Config.intristate 'QIC-02 tape support' CONFIG_QIC02_TAPEif [ "$CONFIG_QIC02_TAPE" != "n" ]; then bool ' Do you want runtime configuration for QIC-02' CONFIG_QIC02_DYNCONF if [ "$CONFIG_QIC02_DYNCONF" != "y" ]; then comment ' Edit configuration parameters in ./include/linux/tpqic02.h!' else comment ' Setting runtime QIC-02 configuration is done with qic02conf' comment ' from the tpqic02-support package. It is available at' comment ' metalab.unc.edu or ftp://titus.cfw.com/pub/Linux/util/' fifimainmenu_option next_commentcomment 'Watchdog Cards'bool 'Watchdog Timer Support' CONFIG_WATCHDOGif [ "$CONFIG_WATCHDOG" != "n" ]; then bool ' Disable watchdog shutdown on close' CONFIG_WATCHDOG_NOWAYOUT tristate ' Acquire SBC Watchdog Timer' CONFIG_ACQUIRE_WDT tristate ' Advantech SBC Watchdog Timer' CONFIG_ADVANTECH_WDT tristate ' ALi M7101 PMU Watchdog Timer' CONFIG_ALIM7101_WDT tristate ' AMD "Elan" SC520 Watchdog Timer' CONFIG_SC520_WDT tristate ' Berkshire Products PC Watchdog' CONFIG_PCWATCHDOG if [ "$CONFIG_FOOTBRIDGE" = "y" ]; then tristate ' DC21285 watchdog' CONFIG_21285_WATCHDOG if [ "$CONFIG_ARCH_NETWINDER" = "y" ]; then tristate ' NetWinder WB83C977 watchdog' CONFIG_977_WATCHDOG fi fi tristate ' Eurotech CPU-1220/1410 Watchdog Timer' CONFIG_EUROTECH_WDT tristate ' IB700 SBC Watchdog Timer' CONFIG_IB700_WDT tristate ' ICP ELectronics Wafer 5823 Watchdog' CONFIG_WAFER_WDT tristate ' Intel i810 TCO timer / Watchdog' CONFIG_I810_TCO tristate ' Mixcom Watchdog' CONFIG_MIXCOMWD tristate ' SBC-60XX Watchdog Timer' CONFIG_60XX_WDT dep_tristate ' SC1200 Watchdog Timer (EXPERIMENTAL)' CONFIG_SC1200_WDT $CONFIG_EXPERIMENTAL tristate ' Software Watchdog' CONFIG_SOFT_WATCHDOG tristate ' W83877F (EMACS) Watchdog Timer' CONFIG_W83877F_WDT tristate ' WDT Watchdog timer' CONFIG_WDT tristate ' WDT PCI Watchdog timer' CONFIG_WDTPCI if [ "$CONFIG_WDT" != "n" ]; then bool ' WDT501 features' CONFIG_WDT_501 if [ "$CONFIG_WDT_501" = "y" ]; then bool ' Fan Tachometer' CONFIG_WDT_501_FAN fi fi tristate ' ZF MachZ Watchdog' CONFIG_MACHZ_WDT dep_tristate ' Indy/I2 Hardware Watchdog' CONFIG_INDYDOG $CONFIG_SGI_IP22 dep_tristate ' AMD 766/768 TCO Timer/Watchdog' CONFIG_AMD7XX_TCO $CONFIG_EXPERIMENTALfiendmenuif [ "$CONFIG_ARCH_NETWINDER" = "y" ]; then tristate 'NetWinder thermometer support' CONFIG_DS1620 tristate 'NetWinder Button' CONFIG_NWBUTTON if [ "$CONFIG_NWBUTTON" != "n" ]; then bool ' Reboot Using Button' CONFIG_NWBUTTON_REBOOT fi tristate 'NetWinder flash support' CONFIG_NWFLASHfiif [ "$CONFIG_X86" = "y" -o "$CONFIG_X86_64" = "y" ]; then dep_tristate 'AMD 768 Random Number Generator support' CONFIG_AMD_RNG $CONFIG_PCIfiif [ "$CONFIG_X86" = "y" -o "$CONFIG_IA64" = "y" ]; then dep_tristate 'Intel i8x0 Random Number Generator support' CONFIG_INTEL_RNG $CONFIG_PCIfidep_tristate 'AMD 76x native power management (Experimental)' CONFIG_AMD_PM768 $CONFIG_PCItristate '/dev/nvram support' CONFIG_NVRAMtristate 'HDP1100 Board Temperature Test' CONFIG_HDP1100_TEMP_TESTtristate 'HDP1100 Board GPIO202 LED0' CONFIG_HDP1100_GPIO202_LED0tristate 'HDP1100 Board GPIO203 LED1' CONFIG_HDP1100_GPIO203_LED1tristate 'HDP1100 Board TIMER' CONFIG_HDP1100_TIMEtristate 'HDP1100 Board GPIO17 LCD(Backlight Control)' CONFIG_HDP1100_GPIO17_LCDbool 'HDP1100 Board watchdog support' CONFIG_HDP1100_WATCHDOGtristate 'Enhanced Real Time Clock Support' CONFIG_RTCtristate 'DB1100_RTC_DS1339' CONFIG_RTC_DS1339if [ "$CONFIG_IA64" = "y" ]; then bool 'EFI Real Time Clock Services' CONFIG_EFI_RTCfiif [ "$CONFIG_OBSOLETE" = "y" -a "$CONFIG_ALPHA_BOOK1" = "y" ]; then bool 'Tadpole ANA H8 Support (OBSOLETE)' CONFIG_H8fitristate 'Double Talk PC internal speech card support' CONFIG_DTLKtristate 'Siemens R3964 line discipline' CONFIG_R3964tristate 'Applicom intelligent fieldbus card support' CONFIG_APPLICOMif [ "$CONFIG_EXPERIMENTAL" = "y" -a "$CONFIG_X86" = "y" -a "$CONFIG_X86_64" != "y" ]; then dep_tristate 'Sony Vaio Programmable I/O Control Device support (EXPERIMENTAL)' CONFIG_SONYPI $CONFIG_PCIfimainmenu_option next_commentcomment 'Ftape, the floppy tape device driver'tristate 'Ftape (QIC-80/Travan) support' CONFIG_FTAPEif [ "$CONFIG_FTAPE" != "n" ]; then source drivers/char/ftape/Config.infiendmenuif [ "$CONFIG_GART_IOMMU" = "y" ]; then bool '/dev/agpgart (AGP Support)' CONFIG_AGP define_bool CONFIG_AGP_AMD_8151 yelse tristate '/dev/agpgart (AGP Support)' CONFIG_AGPfi if [ "$CONFIG_AGP" != "n" ]; then bool ' Intel 440LX/BX/GX and I815/I820/I830M/I830MP/I840/I845/I850/I860 support' CONFIG_AGP_INTEL bool ' Intel I810/I815/I830M (on-board) support' CONFIG_AGP_I810 bool ' VIA chipset support' CONFIG_AGP_VIA bool ' AMD Irongate, 761, and 762 support' CONFIG_AGP_AMD if [ "$CONFIG_GART_IOMMU" != "y" ]; then bool ' AMD 8151 support' CONFIG_AGP_AMD_8151 fi bool ' Generic SiS support' CONFIG_AGP_SIS bool ' ALI chipset support' CONFIG_AGP_ALI bool ' Serverworks LE/HE support' CONFIG_AGP_SWORKS if [ "$CONFIG_IA64" = "y" ]; then bool ' HP ZX1 AGP support' CONFIG_AGP_HP_ZX1 fifibool 'Direct Rendering Manager (XFree86 DRI support)' CONFIG_DRMif [ "$CONFIG_DRM" = "y" ]; then bool ' Build drivers for old (XFree 4.0) DRM' CONFIG_DRM_OLD if [ "$CONFIG_DRM_OLD" = "y" ]; then comment 'DRM 4.0 drivers' source drivers/char/drm-4.0/Config.in else comment 'DRM 4.1 drivers' define_bool CONFIG_DRM_NEW y source drivers/char/drm/Config.in fifiif [ "$CONFIG_HOTPLUG" = "y" -a "$CONFIG_PCMCIA" != "n" ]; then source drivers/char/pcmcia/Config.infiif [ "$CONFIG_CPU_AU1X00" = "y" ]; then tristate ' Alchemy Au1x00 GPIO device support' CONFIG_AU1X00_GPIO tristate ' Au1000/ADS7846 touchscreen support' CONFIG_TS_AU1X00_ADS7846fiif [ "$CONFIG_MIPS_ITE8172" = "y" ]; then tristate ' ITE GPIO' CONFIG_ITE_GPIOfiendmenu⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -