interleaver.mdl

利用matlab/simulink仿真了CDMA2

		PropName		"DisabledProps"
	      }
	      Version		      "1.0.4"
	      TargetFcnLib	      "ansi_tfl_tmw.mat"
	      GenFloatMathFcnCalls    "ANSI_C"
	      UtilityFuncGeneration   "Auto"
	      GenerateFullHeader      on
	      GenerateSampleERTMain   off
	      IsPILTarget	      off
	      ModelReferenceCompliant on
	      IncludeMdlTerminateFcn  on
	      CombineOutputUpdateFcns off
	      SuppressErrorStatus     off
	      IncludeFileDelimiter    "Auto"
	      ERTCustomFileBanners    off
	      SupportAbsoluteTime     on
	      LogVarNameModifier      "rt_"
	      MatFileLogging	      on
	      MultiInstanceERTCode    off
	      SupportNonFinite	      on
	      SupportComplex	      on
	      PurelyIntegerCode	      off
	      SupportContinuousTime   on
	      SupportNonInlinedSFcns  on
	      ExtMode		      off
	      ExtModeStaticAlloc      off
	      ExtModeTesting	      off
	      ExtModeStaticAllocSize  1000000
	      ExtModeTransport	      0
	      ExtModeMexFile	      "ext_comm"
	      RTWCAPISignals	      off
	      RTWCAPIParams	      off
	      RTWCAPIStates	      off
	      GenerateASAP2	      off
	    }
	    PropName		    "Components"
	  }
	}
	PropName		"Components"
      }
      Name		      "Configuration"
      SimulationMode	      "normal"
      CurrentDlgPage	      "Solver"
    }
    PropName		    "ConfigurationSets"
  }
  Simulink.ConfigSet {
    $PropName		    "ActiveConfigurationSet"
    $ObjectID		    1
  }
  BlockDefaults {
    Orientation		    "right"
    ForegroundColor	    "black"
    BackgroundColor	    "white"
    DropShadow		    off
    NamePlacement	    "normal"
    FontName		    "Helvetica"
    FontSize		    10
    FontWeight		    "normal"
    FontAngle		    "normal"
    ShowName		    on
  }
  BlockParameterDefaults {
    Block {
      BlockType		      Inport
      BusObject		      "BusObject"
      BusOutputAsStruct	      off
      PortDimensions	      "-1"
      SampleTime	      "-1"
      DataType		      "auto"
      OutDataType	      "sfix(16)"
      OutScaling	      "2^0"
      SignalType	      "auto"
      SamplingMode	      "auto"
      Interpolate	      on
    }
    Block {
      BlockType		      Outport
      Port		      "1"
      BusObject		      "BusObject"
      BusOutputAsStruct	      off
      PortDimensions	      "-1"
      SampleTime	      "-1"
      DataType		      "auto"
      OutDataType	      "sfix(16)"
      OutScaling	      "2^0"
      SignalType	      "auto"
      SamplingMode	      "auto"
      OutputWhenDisabled      "held"
      InitialOutput	      "[]"
    }
    Block {
      BlockType		      Reference
    }
    Block {
      BlockType		      "S-Function"
      FunctionName	      "system"
      PortCounts	      "[]"
      SFunctionModules	      "''"
    }
    Block {
      BlockType		      SubSystem
      ShowPortLabels	      on
      Permissions	      "ReadWrite"
      PermitHierarchicalResolution "All"
      SystemSampleTime	      "-1"
      RTWFcnNameOpts	      "Auto"
      RTWFileNameOpts	      "Auto"
      SimViewingDevice	      off
      DataTypeOverride	      "UseLocalSettings"
      MinMaxOverflowLogging   "UseLocalSettings"
    }
  }
  AnnotationDefaults {
    HorizontalAlignment	    "center"
    VerticalAlignment	    "middle"
    ForegroundColor	    "black"
    BackgroundColor	    "white"
    DropShadow		    off
    FontName		    "Helvetica"
    FontSize		    10
    FontWeight		    "normal"
    FontAngle		    "normal"
  }
  LineDefaults {
    FontName		    "Helvetica"
    FontSize		    9
    FontWeight		    "normal"
    FontAngle		    "normal"
  }
  System {
    Name		    "Interleaver"
    Location		    [144, 257, 602, 539]
    Open		    on
    ModelBrowserVisibility  off
    ModelBrowserWidth	    200
    ScreenColor		    "white"
    PaperOrientation	    "landscape"
    PaperPositionMode	    "auto"
    PaperType		    "A4"
    PaperUnits		    "centimeters"
    ZoomFactor		    "100"
    ReportName		    "simulink-default.rpt"
    Block {
      BlockType		      Inport
      Name		      "In1"
      Position		      [45, 123, 75, 137]
      Port		      "1"
      IconDisplay	      "Port number"
      LatchInput	      off
    }
    Block {
      BlockType		      SubSystem
      Name		      "Subsystem"
      Ports		      [1, 1]
      Position		      [130, 105, 290, 155]
      TreatAsAtomicUnit	      off
      MinAlgLoopOccurrences   off
      RTWSystemCode	      "Auto"
      MaskPromptString	      "Radio Configuration|Bit Rate|Raw Bits per Frame"
"|Frame duration"
      MaskStyleString	      "edit,edit,edit,edit"
      MaskTunableValueString  "on,on,on,on"
      MaskCallbackString      "|||"
      MaskEnableString	      "on,on,on,on"
      MaskVisibilityString    "on,on,on,on"
      MaskToolTipString	      "on,on,on,on"
      MaskVarAliasString      ",,,"
      MaskVariables	      "xRC=@1;xBitRate=@2;xFrameLength=@3;xFrameDurati"
"on=@4;"
      MaskInitialization      "MS_Interleaver_Initialization"
      MaskDisplay	      "disp('Turbo Encoder\\n\\n(cdma 2000 MS)')"
      MaskIconFrame	      on
      MaskIconOpaque	      on
      MaskIconRotate	      "none"
      MaskIconUnits	      "autoscale"
      MaskValueString	      "0|0|0|0"
      MaskTabNameString	      ",,,"
      System {
	Name			"Subsystem"
	Location		[92, 243, 817, 345]
	Open			off
	ModelBrowserVisibility	off
	ModelBrowserWidth	200
	ScreenColor		"white"
	PaperOrientation	"landscape"
	PaperPositionMode	"auto"
	PaperType		"A4"
	PaperUnits		"centimeters"
	ZoomFactor		"100"
	Block {
	  BlockType		  Inport
	  Name			  "In1"
	  Position		  [25, 43, 55, 57]
	  Port			  "1"
	  IconDisplay		  "Port number"
	  LatchInput		  off
	}
	Block {
	  BlockType		  Reference
	  Name			  "Frame Status\nConversion"
	  Ports			  [1, 1]
	  Position		  [325, 32, 375, 68]
	  SourceBlock		  "dspsigattribs/Frame Status\nConversion"
	  SourceType		  "Frame Status Conversion"
	  growRefPort		  "off"
	  outframe		  "Sample-based"
	}
	Block {
	  BlockType		  Reference
	  Name			  "Frame Status\nConversion1"
	  Ports			  [1, 1]
	  Position		  [555, 32, 605, 68]
	  SourceBlock		  "dspsigattribs/Frame Status\nConversion"
	  SourceType		  "Frame Status Conversion"
	  growRefPort		  "off"
	  outframe		  "Frame-based"
	}
	Block {
	  BlockType		  Reference
	  Name			  "Puncture"
	  Ports			  [1, 1]
	  Position		  [190, 28, 270, 72]
	  SourceBlock		  "commsequence2/Puncture"
	  SourceType		  "Puncture"
	  punctureVector	  "xPunctureVector"
	}
	Block {
	  BlockType		  Reference
	  Name			  "Repeat"
	  Ports			  [1, 1]
	  Position		  [105, 33, 145, 67]
	  SourceBlock		  "dspsigops/Repeat"
	  SourceType		  "Repeat"
	  N			  "xRepetitionCount"
	  ic			  "0"
	  mode			  "Maintain input frame rate"
	}
	Block {
	  BlockType		  "S-Function"
	  Name			  "S-Function"
	  Ports			  [1, 1]
	  Position		  [415, 25, 525, 75]
	  FunctionName		  "MS_SFUN_Interleaver"
	  Parameters		  "xInterleaverSize"
	  MaskPromptString	  "Frame Length|Code Rate"
	  MaskStyleString	  "edit,popup(rate 1/2|rate 1/3|rate 1/4)"
	  MaskTunableValueString  "on,on"
	  MaskCallbackString	  "|"
	  MaskEnableString	  "on,on"
	  MaskVisibilityString	  "on,on"
	  MaskToolTipString	  "on,on"
	  MaskVarAliasString	  ","
	  MaskVariables		  "xFrameLength=@1;xCodeRate=@2;"
	  MaskIconFrame		  on
	  MaskIconOpaque	  on
	  MaskIconRotate	  "none"
	  MaskIconUnits		  "autoscale"
	  MaskValueString	  "0|rate 1/2"
	  MaskTabNameString	  ","
	}
	Block {
	  BlockType		  Outport
	  Name			  "Out1"
	  Position		  [670, 43, 700, 57]
	  IconDisplay		  "Port number"
	}
	Line {
	  SrcBlock		  "In1"
	  SrcPort		  1
	  DstBlock		  "Repeat"
	  DstPort		  1
	}
	Line {
	  SrcBlock		  "Repeat"
	  SrcPort		  1
	  DstBlock		  "Puncture"
	  DstPort		  1
	}
	Line {
	  SrcBlock		  "Puncture"
	  SrcPort		  1
	  DstBlock		  "Frame Status\nConversion"
	  DstPort		  1
	}
	Line {
	  SrcBlock		  "Frame Status\nConversion"
	  SrcPort		  1
	  DstBlock		  "S-Function"
	  DstPort		  1
	}
	Line {
	  SrcBlock		  "S-Function"
	  SrcPort		  1
	  DstBlock		  "Frame Status\nConversion1"
	  DstPort		  1
	}
	Line {
	  SrcBlock		  "Frame Status\nConversion1"
	  SrcPort		  1
	  DstBlock		  "Out1"
	  DstPort		  1
	}
      }
    }
    Block {
      BlockType		      Outport
      Name		      "Out1"
      Position		      [355, 123, 385, 137]
      IconDisplay	      "Port number"
    }
    Line {
      SrcBlock		      "Subsystem"
      SrcPort		      1
      DstBlock		      "Out1"
      DstPort		      1
    }
    Line {
      SrcBlock		      "In1"
      SrcPort		      1
      DstBlock		      "Subsystem"
      DstPort		      1
    }
  }
}