qam.sim.talkback.xml

实现QAM调制功能和QAM解调功能的代码.

<!--
This XML file (created on Sun Jun 15 09:34:58 2008) contains limited information
from the compilation of logic designs using Quartus II software (BUT NOT THE
LOGIC DESIGN FILES) that will be transmitted to Altera Corporation through
operation of the "TalkBack" feature.  To enable/disable this feature, run
qtb_install.exe located in your quartus/bin folder.  For more information, go
to license.txt.
-->
<talkback>
<ver>6.0</ver>
<schema>quartus_version_6.0_build_178.xsd</schema>
<license>
	<host_id>001b387d5bdc</host_id>
	<nic_id>001b77ced793</nic_id>
	<cdrive_id>2a1d0905</cdrive_id>
</license>
<tool>
	<name>Quartus II</name>
	<version>6.0</version>
	<build>Build 178</build>
	<binary_type>32</binary_type>
	<module>quartus_sim</module>
	<edition>Full Version</edition>
	<eval>Licensed</eval>
	<compilation_end_time>Sun Jun 15 09:34:59 2008</compilation_end_time>
</tool>
<machine>
	<os>Windows XP</os>
	<cpu>
		<proc_count>1</proc_count>
		<cpu_freq units="MHz">1662</cpu_freq>
	</cpu>
	<ram units="MB">504</ram>
</machine>
<project>D:/杨淼的毕业设计/bs/QAM</project>
<revision>QAM</revision>
<compilation_summary>
	<flow_status>Successful - Sun Jun 15 09:34:58 2008</flow_status>
	<simulator_setting_name>QAM</simulator_setting_name>
	<top_level_entity_name>QAM</top_level_entity_name>
</compilation_summary>
<mep_data>
	<command_line>quartus_sim --read_settings_files=on --write_settings_files=off QAM -c QAM</command_line>
</mep_data>
<simulator_settings>
	<row>
		<option>Simulation mode</option>
		<setting>Functional</setting>
		<default_value>Timing</default_value>
	</row>
	<row>
		<option>Start time</option>
		<setting units="ns">0</setting>
		<default_value units="ns">0</default_value>
	</row>
	<row>
		<option>Vector input source</option>
		<setting>QAM.vwf</setting>
	</row>
	<row>
		<option>Add pins automatically to simulation output waveforms</option>
		<setting>On</setting>
		<default_value>On</default_value>
	</row>
	<row>
		<option>Check outputs</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
	<row>
		<option>Report simulation coverage</option>
		<setting>On</setting>
		<default_value>On</default_value>
	</row>
	<row>
		<option>Display complete 1/0 value coverage report</option>
		<setting>On</setting>
		<default_value>On</default_value>
	</row>
	<row>
		<option>Display missing 1-value coverage report</option>
		<setting>On</setting>
		<default_value>On</default_value>
	</row>
	<row>
		<option>Display missing 0-value coverage report</option>
		<setting>On</setting>
		<default_value>On</default_value>
	</row>
	<row>
		<option>Detect setup and hold time violations</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
	<row>
		<option>Detect glitches</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
	<row>
		<option>Disable timing delays in Timing Simulation</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
	<row>
		<option>Generate Signal Activity File</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
	<row>
		<option>Group bus channels in simulation results</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
	<row>
		<option>Preserve fewer signal transitions to reduce memory requirements</option>
		<setting>On</setting>
		<default_value>On</default_value>
	</row>
	<row>
		<option>Trigger vector comparison with the specified mode</option>
		<setting>INPUT_EDGE</setting>
		<default_value>INPUT_EDGE</default_value>
	</row>
	<row>
		<option>Disable setup and hold time violations detection in input registers of bi-directional pins</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
	<row>
		<option>Overwrite Waveform Inputs With Simulation Outputs</option>
		<setting>Off</setting>
	</row>
	<row>
		<option>Glitch Filtering</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
</simulator_settings>
<simulator_summary>
	<simulation_start_time>0 ps</simulation_start_time>
	<simulation_end_time>500.0 us</simulation_end_time>
	<simulation_netlist_size>980 nodes</simulation_netlist_size>
	<simulation_coverage>     73.49 %</simulation_coverage>
	<total_number_of_transitions>2719052</total_number_of_transitions>
	<simulation_breakpoints>0</simulation_breakpoints>
	<family>Cyclone II</family>
</simulator_summary>
</talkback>