⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 icn.h

📁 LINUX 2.6.17.4的源码
💻 H
字号:
/* $Id: icn.h,v 1.30.6.5 2001/09/23 22:24:55 kai Exp $ * * ISDN lowlevel-module for the ICN active ISDN-Card. * * Copyright 1994 by Fritz Elfert (fritz@isdn4linux.de) * * This software may be used and distributed according to the terms * of the GNU General Public License, incorporated herein by reference. * */#ifndef icn_h#define icn_h#define ICN_IOCTL_SETMMIO   0#define ICN_IOCTL_GETMMIO   1#define ICN_IOCTL_SETPORT   2#define ICN_IOCTL_GETPORT   3#define ICN_IOCTL_LOADBOOT  4#define ICN_IOCTL_LOADPROTO 5#define ICN_IOCTL_LEASEDCFG 6#define ICN_IOCTL_GETDOUBLE 7#define ICN_IOCTL_DEBUGVAR  8#define ICN_IOCTL_ADDCARD   9/* Struct for adding new cards */typedef struct icn_cdef {	int port;	char id1[10];	char id2[10];} icn_cdef;#if defined(__KERNEL__) || defined(__DEBUGVAR__)#ifdef __KERNEL__/* Kernel includes */#include <linux/errno.h>#include <linux/fs.h>#include <linux/major.h>#include <asm/io.h>#include <linux/kernel.h>#include <linux/signal.h>#include <linux/slab.h>#include <linux/mm.h>#include <linux/mman.h>#include <linux/ioport.h>#include <linux/timer.h>#include <linux/wait.h>#include <linux/delay.h>#include <linux/isdnif.h>#endif                          /* __KERNEL__ *//* some useful macros for debugging */#ifdef ICN_DEBUG_PORT#define OUTB_P(v,p) {printk(KERN_DEBUG "icn: outb_p(0x%02x,0x%03x)\n",v,p); outb_p(v,p);}#else#define OUTB_P outb#endif/* Defaults for Port-Address and shared-memory */#define ICN_BASEADDR 0x320#define ICN_PORTLEN (0x04)#define ICN_MEMADDR 0x0d0000#define ICN_FLAGS_B1ACTIVE 1    /* B-Channel-1 is open                     */#define ICN_FLAGS_B2ACTIVE 2    /* B-Channel-2 is open                     */#define ICN_FLAGS_RUNNING  4    /* Cards driver activated                  */#define ICN_FLAGS_RBTIMER  8    /* cyclic scheduling of B-Channel-poll     */#define ICN_BOOT_TIMEOUT1  1000 /* Delay for Boot-download (msecs)         */#define ICN_TIMER_BCREAD (HZ/100)	/* B-Channel poll-cycle                    */#define ICN_TIMER_DCREAD (HZ/2) /* D-Channel poll-cycle                    */#define ICN_CODE_STAGE1 4096    /* Size of bootcode                        */#define ICN_CODE_STAGE2 65536   /* Size of protocol-code                   */#define ICN_MAX_SQUEUE 8000     /* Max. outstanding send-data (2* hw-buf.) */#define ICN_FRAGSIZE (250)      /* Max. size of send-fragments             */#define ICN_BCH 2               /* Number of supported channels per card   *//* type-definitions for accessing the mmap-io-areas */#define SHM_DCTL_OFFSET (0)     /* Offset to data-controlstructures in shm */#define SHM_CCTL_OFFSET (0x1d2) /* Offset to comm-controlstructures in shm */#define SHM_CBUF_OFFSET (0x200) /* Offset to comm-buffers in shm           */#define SHM_DBUF_OFFSET (0x2000)	/* Offset to data-buffers in shm           *//* * Layout of card's data buffers */typedef struct {	unsigned char length;   /* Bytecount of fragment (max 250)    */	unsigned char endflag;  /* 0=last frag., 0xff=frag. continued */	unsigned char data[ICN_FRAGSIZE];	/* The data                           */	/* Fill to 256 bytes */	char unused[0x100 - ICN_FRAGSIZE - 2];} frag_buf;/* * Layout of card's shared memory */typedef union {	struct {		unsigned char scns;	/* Index to free SendFrag.             */		unsigned char scnr;	/* Index to active SendFrag   READONLY */		unsigned char ecns;	/* Index to free RcvFrag.     READONLY */		unsigned char ecnr;	/* Index to valid RcvFrag              */		char unused[6];		unsigned short fuell1;	/* Internal Buf Bytecount              */	} data_control;	struct {		char unused[SHM_CCTL_OFFSET];		unsigned char iopc_i;	/* Read-Ptr Status-Queue      READONLY */		unsigned char iopc_o;	/* Write-Ptr Status-Queue              */		unsigned char pcio_i;	/* Write-Ptr Command-Queue             */		unsigned char pcio_o;	/* Read-Ptr Command Queue     READONLY */	} comm_control;	struct {		char unused[SHM_CBUF_OFFSET];		unsigned char pcio_buf[0x100];	/* Ring-Buffer Command-Queue           */		unsigned char iopc_buf[0x100];	/* Ring-Buffer Status-Queue            */	} comm_buffers;	struct {		char unused[SHM_DBUF_OFFSET];		frag_buf receive_buf[0x10];		frag_buf send_buf[0x10];	} data_buffers;} icn_shmem;/* * Per card driver data */typedef struct icn_card {	struct icn_card *next;  /* Pointer to next device struct    */	struct icn_card *other; /* Pointer to other card for ICN4B  */	unsigned short port;    /* Base-port-address                */	int myid;               /* Driver-Nr. assigned by linklevel */	int rvalid;             /* IO-portregion has been requested */	int leased;             /* Flag: This Adapter is connected  */	                        /*       to a leased line           */	unsigned short flags;   /* Statusflags                      */	int doubleS0;           /* Flag: ICN4B                      */	int secondhalf;         /* Flag: Second half of a doubleS0  */	int fw_rev;             /* Firmware revision loaded         */	int ptype;              /* Protocol type (1TR6 or Euro)     */	struct timer_list st_timer;   /* Timer for Status-Polls     */	struct timer_list rb_timer;   /* Timer for B-Channel-Polls  */	u_char rcvbuf[ICN_BCH][4096]; /* B-Channel-Receive-Buffers  */	int rcvidx[ICN_BCH];    /* Index for above buffers          */	int l2_proto[ICN_BCH];  /* Current layer-2-protocol         */	isdn_if interface;      /* Interface to upper layer         */	int iptr;               /* Index to imsg-buffer             */	char imsg[60];          /* Internal buf for status-parsing  */	char msg_buf[2048];     /* Buffer for status-messages       */	char *msg_buf_write;    /* Writepointer for statusbuffer    */	char *msg_buf_read;     /* Readpointer for statusbuffer     */	char *msg_buf_end;      /* Pointer to end of statusbuffer   */	int sndcount[ICN_BCH];  /* Byte-counters for B-Ch.-send     */	int xlen[ICN_BCH];      /* Byte-counters/Flags for sent-ACK */	struct sk_buff *xskb[ICN_BCH]; /* Current transmitted skb   */	struct sk_buff_head spqueue[ICN_BCH];  /* Sendqueue         */	char regname[35];       /* Name used for request_region     */	u_char xmit_lock[ICN_BCH]; /* Semaphore for pollbchan_send()*/	spinlock_t lock;        /* protect critical operations      */} icn_card;/* * Main driver data */typedef struct icn_dev {	spinlock_t devlock;     /* spinlock to protect this struct  */	unsigned long memaddr;	/* Address of memory mapped buffers */	icn_shmem __iomem *shmem;       /* Pointer to memory-mapped-buffers */	int mvalid;             /* IO-shmem has been requested      */	int channel;            /* Currently mapped channel         */	struct icn_card *mcard; /* Currently mapped card            */	int chanlock;           /* Semaphore for channel-mapping    */	int firstload;          /* Flag: firmware never loaded      */} icn_dev;typedef icn_dev *icn_devptr;#ifdef __KERNEL__static icn_card *cards = (icn_card *) 0;static u_char chan2bank[] ={0, 4, 8, 12};                  /* for icn_map_channel() */static icn_dev dev;#endif                          /* __KERNEL__ *//* Utility-Macros *//* Macros for accessing ports */#define ICN_CFG    (card->port)#define ICN_MAPRAM (card->port+1)#define ICN_RUN    (card->port+2)#define ICN_BANK   (card->port+3)/* Return true, if there is a free transmit-buffer */#define sbfree (((readb(&dev.shmem->data_control.scns)+1) & 0xf) != \		readb(&dev.shmem->data_control.scnr))/* Switch to next transmit-buffer */#define sbnext (writeb((readb(&dev.shmem->data_control.scns)+1) & 0xf, \		       &dev.shmem->data_control.scns))/* Shortcuts for transmit-buffer-access */#define sbuf_n dev.shmem->data_control.scns#define sbuf_d dev.shmem->data_buffers.send_buf[readb(&sbuf_n)].data#define sbuf_l dev.shmem->data_buffers.send_buf[readb(&sbuf_n)].length#define sbuf_f dev.shmem->data_buffers.send_buf[readb(&sbuf_n)].endflag/* Return true, if there is receive-data is available */#define rbavl  (readb(&dev.shmem->data_control.ecnr) != \		readb(&dev.shmem->data_control.ecns))/* Switch to next receive-buffer */#define rbnext (writeb((readb(&dev.shmem->data_control.ecnr)+1) & 0xf, \		       &dev.shmem->data_control.ecnr))/* Shortcuts for receive-buffer-access */#define rbuf_n dev.shmem->data_control.ecnr#define rbuf_d dev.shmem->data_buffers.receive_buf[readb(&rbuf_n)].data#define rbuf_l dev.shmem->data_buffers.receive_buf[readb(&rbuf_n)].length#define rbuf_f dev.shmem->data_buffers.receive_buf[readb(&rbuf_n)].endflag/* Shortcuts for command-buffer-access */#define cmd_o (dev.shmem->comm_control.pcio_o)#define cmd_i (dev.shmem->comm_control.pcio_i)/* Return free space in command-buffer */#define cmd_free ((readb(&cmd_i)>=readb(&cmd_o))? \		  0x100-readb(&cmd_i)+readb(&cmd_o): \		  readb(&cmd_o)-readb(&cmd_i))/* Shortcuts for message-buffer-access */#define msg_o (dev.shmem->comm_control.iopc_o)#define msg_i (dev.shmem->comm_control.iopc_i)/* Return length of Message, if avail. */#define msg_avail ((readb(&msg_o)>readb(&msg_i))? \		   0x100-readb(&msg_o)+readb(&msg_i): \		   readb(&msg_i)-readb(&msg_o))#define CID (card->interface.id)#endif                          /* defined(__KERNEL__) || defined(__DEBUGVAR__) */#endif                          /* icn_h */

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -