📄 irq.c
字号:
/* * BRIEF MODULE DESCRIPTION * ITE 8172G interrupt/setup routines. * * Copyright 2000,2001 MontaVista Software Inc. * Author: MontaVista Software, Inc. * ppopov@mvista.com or source@mvista.com * * Part of this file was derived from Carsten Langgaard's * arch/mips/mips-boards/atlas/atlas_int.c. * * Carsten Langgaard, carstenl@mips.com * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * You should have received a copy of the GNU General Public License along * with this program; if not, write to the Free Software Foundation, Inc., * 675 Mass Ave, Cambridge, MA 02139, USA. */#include <linux/errno.h>#include <linux/init.h>#include <linux/irq.h>#include <linux/kernel_stat.h>#include <linux/module.h>#include <linux/signal.h>#include <linux/sched.h>#include <linux/types.h>#include <linux/interrupt.h>#include <linux/ioport.h>#include <linux/timex.h>#include <linux/slab.h>#include <linux/random.h>#include <linux/serial_reg.h>#include <linux/bitops.h>#include <asm/bootinfo.h>#include <asm/io.h>#include <asm/mipsregs.h>#include <asm/system.h>#include <asm/it8172/it8172.h>#include <asm/it8172/it8172_int.h>#include <asm/it8172/it8172_dbg.h>/* revisit */#define EXT_IRQ0_TO_IP 2 /* IP 2 */#define EXT_IRQ5_TO_IP 7 /* IP 7 */#define ALLINTS_NOTIMER (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4)extern void set_debug_traps(void);extern void mips_timer_interrupt(int irq, struct pt_regs *regs);struct it8172_intc_regs volatile *it8172_hw0_icregs = (struct it8172_intc_regs volatile *)(KSEG1ADDR(IT8172_PCI_IO_BASE + IT_INTC_BASE));static void disable_it8172_irq(unsigned int irq_nr){ if ( (irq_nr >= IT8172_LPC_IRQ_BASE) && (irq_nr <= IT8172_SERIRQ_15)) { /* LPC interrupt */ it8172_hw0_icregs->lpc_mask |= (1 << (irq_nr - IT8172_LPC_IRQ_BASE)); } else if ( (irq_nr >= IT8172_LB_IRQ_BASE) && (irq_nr <= IT8172_IOCHK_IRQ)) { /* Local Bus interrupt */ it8172_hw0_icregs->lb_mask |= (1 << (irq_nr - IT8172_LB_IRQ_BASE)); } else if ( (irq_nr >= IT8172_PCI_DEV_IRQ_BASE) && (irq_nr <= IT8172_DMA_IRQ)) { /* PCI and other interrupts */ it8172_hw0_icregs->pci_mask |= (1 << (irq_nr - IT8172_PCI_DEV_IRQ_BASE)); } else if ( (irq_nr >= IT8172_NMI_IRQ_BASE) && (irq_nr <= IT8172_POWER_NMI_IRQ)) { /* NMI interrupts */ it8172_hw0_icregs->nmi_mask |= (1 << (irq_nr - IT8172_NMI_IRQ_BASE)); } else { panic("disable_it8172_irq: bad irq %d", irq_nr); }}static void enable_it8172_irq(unsigned int irq_nr){ if ( (irq_nr >= IT8172_LPC_IRQ_BASE) && (irq_nr <= IT8172_SERIRQ_15)) { /* LPC interrupt */ it8172_hw0_icregs->lpc_mask &= ~(1 << (irq_nr - IT8172_LPC_IRQ_BASE)); } else if ( (irq_nr >= IT8172_LB_IRQ_BASE) && (irq_nr <= IT8172_IOCHK_IRQ)) { /* Local Bus interrupt */ it8172_hw0_icregs->lb_mask &= ~(1 << (irq_nr - IT8172_LB_IRQ_BASE)); } else if ( (irq_nr >= IT8172_PCI_DEV_IRQ_BASE) && (irq_nr <= IT8172_DMA_IRQ)) { /* PCI and other interrupts */ it8172_hw0_icregs->pci_mask &= ~(1 << (irq_nr - IT8172_PCI_DEV_IRQ_BASE)); } else if ( (irq_nr >= IT8172_NMI_IRQ_BASE) && (irq_nr <= IT8172_POWER_NMI_IRQ)) { /* NMI interrupts */ it8172_hw0_icregs->nmi_mask &= ~(1 << (irq_nr - IT8172_NMI_IRQ_BASE)); } else { panic("enable_it8172_irq: bad irq %d", irq_nr); }}static unsigned int startup_ite_irq(unsigned int irq){ enable_it8172_irq(irq); return 0;}#define shutdown_ite_irq disable_it8172_irq#define mask_and_ack_ite_irq disable_it8172_irqstatic void end_ite_irq(unsigned int irq){ if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) enable_it8172_irq(irq);}static struct hw_interrupt_type it8172_irq_type = { .typename = "ITE8172", .startup = startup_ite_irq, .shutdown = shutdown_ite_irq, .enable = enable_it8172_irq, .disable = disable_it8172_irq, .ack = mask_and_ack_ite_irq, .end = end_ite_irq,};static void enable_none(unsigned int irq) { }static unsigned int startup_none(unsigned int irq) { return 0; }static void disable_none(unsigned int irq) { }static void ack_none(unsigned int irq) { }/* startup is the same as "enable", shutdown is same as "disable" */#define shutdown_none disable_none#define end_none enable_nonestatic struct hw_interrupt_type cp0_irq_type = { .typename = "CP0 Count", .startup = startup_none, .shutdown = shutdown_none, .enable = enable_none, .disable = disable_none, .ack = ack_none, .end = end_none};void enable_cpu_timer(void){ unsigned long flags; local_irq_save(flags); set_c0_status(0x100 << EXT_IRQ5_TO_IP); local_irq_restore(flags);}void __init arch_init_irq(void){ int i; unsigned long flags; /* mask all interrupts */ it8172_hw0_icregs->lb_mask = 0xffff; it8172_hw0_icregs->lpc_mask = 0xffff; it8172_hw0_icregs->pci_mask = 0xffff; it8172_hw0_icregs->nmi_mask = 0xffff; /* make all interrupts level triggered */ it8172_hw0_icregs->lb_trigger = 0; it8172_hw0_icregs->lpc_trigger = 0; it8172_hw0_icregs->pci_trigger = 0; it8172_hw0_icregs->nmi_trigger = 0; /* active level setting */ /* uart, keyboard, and mouse are active high */ it8172_hw0_icregs->lpc_level = (0x10 | 0x2 | 0x1000); it8172_hw0_icregs->lb_level |= 0x20; /* keyboard and mouse are edge triggered */ it8172_hw0_icregs->lpc_trigger |= (0x2 | 0x1000);#if 0 // Enable this piece of code to make internal USB interrupt // edge triggered. it8172_hw0_icregs->pci_trigger |= (1 << (IT8172_USB_IRQ - IT8172_PCI_DEV_IRQ_BASE)); it8172_hw0_icregs->pci_level &= ~(1 << (IT8172_USB_IRQ - IT8172_PCI_DEV_IRQ_BASE));#endif for (i = 0; i <= IT8172_LAST_IRQ; i++) { irq_desc[i].handler = &it8172_irq_type; spin_lock_init(&irq_desc[i].lock); } irq_desc[MIPS_CPU_TIMER_IRQ].handler = &cp0_irq_type; set_c0_status(ALLINTS_NOTIMER);}void mips_spurious_interrupt(struct pt_regs *regs){#if 1 return;#else unsigned long status, cause; printk("got spurious interrupt\n"); status = read_c0_status(); cause = read_c0_cause(); printk("status %x cause %x\n", status, cause); printk("epc %x badvaddr %x \n", regs->cp0_epc, regs->cp0_badvaddr);#endif}void it8172_hw0_irqdispatch(struct pt_regs *regs){ int irq; unsigned short intstatus = 0, status = 0; intstatus = it8172_hw0_icregs->intstatus; if (intstatus & 0x8) { panic("Got NMI interrupt"); } else if (intstatus & 0x4) { /* PCI interrupt */ irq = 0; status |= it8172_hw0_icregs->pci_req; while (!(status & 0x1)) { irq++; status >>= 1; } irq += IT8172_PCI_DEV_IRQ_BASE; } else if (intstatus & 0x1) { /* Local Bus interrupt */ irq = 0; status |= it8172_hw0_icregs->lb_req; while (!(status & 0x1)) { irq++; status >>= 1; } irq += IT8172_LB_IRQ_BASE; } else if (intstatus & 0x2) { /* LPC interrupt */ /* Since some lpc interrupts are edge triggered, * we could lose an interrupt this way because * we acknowledge all ints at onces. Revisit. */ status |= it8172_hw0_icregs->lpc_req; it8172_hw0_icregs->lpc_req = 0; /* acknowledge ints */ irq = 0; while (!(status & 0x1)) { irq++; status >>= 1; } irq += IT8172_LPC_IRQ_BASE; } else return; do_IRQ(irq, regs);}asmlinkage void plat_irq_dispatch(struct pt_regs *regs){ unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM; if (!pending) mips_spurious_interrupt(regs); else if (pending & CAUSEF_IP7) ll_timer_interrupt(127, regs); else if (pending & CAUSEF_IP2) it8172_hw0_irqdispatch(regs);}void show_pending_irqs(void){ fputs("intstatus: "); put32(it8172_hw0_icregs->intstatus); puts(""); fputs("pci_req: "); put32(it8172_hw0_icregs->pci_req); puts(""); fputs("lb_req: "); put32(it8172_hw0_icregs->lb_req); puts(""); fputs("lpc_req: "); put32(it8172_hw0_icregs->lpc_req); puts("");}
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -