⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 xynth.conf

📁 CS架构的多平台的GUI系统
💻 CONF
字号:
; xynth configuration file[general]; Drivers :; fbdev; vesa; svgalib; sdl; gdi; pspdev; nulldriver = sdl; Mode :; WidthxHeightxColors; 1024x768x256		8 bit; 1024x768x32K		15 bit; 1024x768x64K		16 bit; 1024x768x16M		24 bit (24 bit modes are not supported); 1024x768x16M32	32 bit;mode = 640x480x64K;mode = 1024x768x64Kmode = 640x480x16M32;mode = 800x600x16M32;mode = 1024x768x16M32[mouse]; Mouse Types :; MOUSE_NONE          There is no mouse installed.; MOUSE_MICROSOFT     A Microsoft compatible mouse (2 buttons).; MOUSE_MOUSESYSTEMS  A MouseSystems compatible mouse (3 buttons).; MOUSE_MMSERIES      A MMSeries compatible mouse.; MOUSE_LOGITECH      An ordinary LogiTech compatible mouse.; MOUSE_BUSMOUSE      A busmouse.; MOUSE_PS2           A PS/2 busmouse.; MOUSE_LOGIMAN       An ordinary LogiTech LogiMan compatible mouse.; MOUSE_GPM           The GPM daemon is used.; MOUSE_SPACEBALL     A 3d SpaceTec Spaceball pointer device.; MOUSE_INTELLIMOUSE  A Microsoft IntelliMouse or Logitech MouseMan+ on serial port.; MOUSE_IMPS2         A Microsoft IntelliMouse or Logitech MouseMan+ on PS/2 port.type = MOUSE_PS2; Usually /dev/mouse will be a link to the mouse device.device = /dev/psauxsamplerate = 150 ; default; Scale routine sets the scale factor between the motion reported by the mouse; and the size of one pixel. The larger the scale is, the slower the mouse; cursor appears to move. The scale may be set to any non-zero integer.; Negative scales result in flipped axes. Currently, there is no support for; scale factors between 0 and 1 which would make the mouse appear faster than; usual.scale = 1[monitor]; Only one range can be specified for the moment.  Format:; HorizSync min_kHz max_kHz; VertRefresh min_Hz max_Hz; Typical Horizontal sync ranges; (Consult your monitor manual for Vertical sync ranges); 31.5 - 31.5 kHz (Standard VGA monitor, 640x480 @ 60 Hz); 31.5 - 35.1 kHz (Old SVGA monitor, 800x600 @ 56 Hz); 31.5 - 35.5 kHz (Low-end SVGA, 8514, 1024x768 @ 43 Hz interlaced); 31.5 - 37.9 kHz (SVGA monitor, 800x600 @ 60 Hz, 640x480 @ 72 Hz); 31.5 - 48.3 kHz (SVGA non-interlaced, 800x600 @ 72 Hz, 1024x768 @ 60 Hz); 31.5 - 56.0 kHz (high frequency, 1024x768 @ 70 Hz); 31.5 - ???? kHz (1024x768 @ 72 Hz); 31.5 - 64.3 kHz (1280x1024 @ 60 Hz); Generic; horizsync = 31.5 35.5; vertrefresh = 50 90; Philips 170 B4;horizsync = 30 82;vertrefresh = 56 76; Philips 107 T5horizsync = 31 70vertrefresh = 50 160

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -