trafsig.abl

来自「自己编写的GAL可编程逻辑电路的编译软件abel4的windows界面」· ABL 代码 · 共 78 行

module TRAFSIG
title 'Traffic Signal Controller  
Michael McClure   Data I/O Corp   2 May 1990'

        H,L,Ck,X        = 1, 0, .C., .X.;

        trafsig device  'F159';

        Clk,Clr,SenA,SenB       pin 1,2,3,4; 
        GreenA,YellowA,RedA     pin 12,13,14;
        GreenB,YellowB,RedB     pin 15,16,17;
        Wait1,Wait0             pin 18,19;

        GreenA,YellowA,RedA     istype 'reg_JK,invert';
        GreenB,YellowB,RedB     istype 'reg_JK,invert';
        Wait1,Wait0             istype 'reg_JK,invert';

        StateReg = [GreenA,YellowA,RedA,GreenB,YellowB,RedB,Wait1,Wait0];
        A1       = [   1  ,   0   ,  0 ,   0  ,   0   ,  1 ,  0  ,  0  ];
        A2       = [   1  ,   0   ,  0 ,   0  ,   0   ,  1 ,  0  ,  1  ];
        A3       = [   1  ,   0   ,  0 ,   0  ,   0   ,  1 ,  1  ,  1  ];
        A4       = [   1  ,   0   ,  0 ,   0  ,   0   ,  1 ,  1  ,  0  ];
        A5       = [   0  ,   1   ,  0 ,   0  ,   0   ,  1 ,  0  ,  0  ];

        B1       = [   0  ,   0   ,  1 ,   1  ,   0   ,  0 ,  0  ,  0  ];
        B2       = [   0  ,   0   ,  1 ,   1  ,   0   ,  0 ,  0  ,  1  ];
        B3       = [   0  ,   0   ,  1 ,   1  ,   0   ,  0 ,  1  ,  1  ];
        B4       = [   0  ,   0   ,  1 ,   1  ,   0   ,  0 ,  1  ,  0  ];
        B5       = [   0  ,   0   ,  1 ,   0  ,   1   ,  0 ,  0  ,  0  ];

        Start    = [   0  ,   0   ,  0 ,   0  ,   0   ,  0 ,  0  ,  0  ];

@page 
test_vectors   ([Clk,Clr,SenA,SenB] -> StateReg)
                [ Ck, 1 , 1  , 0  ] ->   Start;
                [ Ck, 1 , 1  , 0  ] ->   Start;
                [ Ck, 0 , 1  , 0  ] ->    A1  ;
                [ Ck, 0 , 1  , 0  ] ->    A1  ;
                [ Ck, 0 , 1  , 0  ] ->    A1  ;
                [ Ck, 0 , 1  , 1  ] ->    A2  ;
                [ Ck, 0 , 1  , 1  ] ->    A3  ;
                [ Ck, 0 , 1  , 1  ] ->    A4  ;
                [ Ck, 0 , 1  , 1  ] ->    A5  ;
                [ Ck, 0 , 1  , 0  ] ->    B1  ;
                [ Ck, 0 , 1  , 0  ] ->    B5  ;
                [ Ck, 0 , 1  , 0  ] ->    A1  ;
                [ Ck, 0 , 1  , 0  ] ->    A1  ;
                [ Ck, 0 , 1  , 1  ] ->    A2  ;
                [ Ck, 0 , 1  , 1  ] ->    A3  ;
@dcset 
equations
        StateReg.ap  = Clr;
        StateReg.clk = Clk;

state_diagram StateReg

        State Start:    goto  A1;

        State A1:       if ( SenA & !SenB ) then A1;
                        if (!SenA &  SenB ) then A5;
                        if ( SenA == SenB ) then A2;

        State A2:       goto  A3;
        State A3:       goto  A4;
        State A4:       goto  A5;
        State A5:       goto  B1;

        State B1:       if (!SenA &  SenB ) then B1;
                        if ( SenA & !SenB ) then B5;
                        if ( SenA == SenB ) then B2;

        State B2:       goto  B3;
        State B3:       goto  B4;
        State B4:       goto  B5;
        State B5:       goto  A1;
end