mcontrol.map

适合初学者学习的UPSD的点阵LCD汉字显示

**********************************************************************
                  PSDsoft Express Version 8.10
           Output of PSD Fitter - Memory Map Report
**********************************************************************
PROJECT    : mcontrol                                 DATE : 11/09/2006
DEVICE     : uPSD3234A                                TIME : 11:13:40
**********************************************************************

==== Device Configuration ====

Data Bus Width                                                    : 8 bit
Security Protection                                               : OFF

Main PSD flash memory will reside in this space at power-up       : Data space
Secondary PSD flash memory will reside in this space at power-up  : Program space

Flash Sector 0 is unprotected.
Flash Sector 1 is unprotected.
Flash Sector 2 is unprotected.
Flash Sector 3 is unprotected.
Flash Sector 4 is unprotected.
Flash Sector 5 is unprotected.
Flash Sector 6 is unprotected.
Flash Sector 7 is unprotected.
Flash Boot Sector 0 is unprotected.
Flash Boot Sector 1 is unprotected.
Flash Boot Sector 2 is unprotected.
Flash Boot Sector 3 is unprotected.

==== Memory Map Report ====

Total address field length available 	= 24 bits
Page register length                 	= 8 bits
Natural address field length         	= 16 bits
Bits used for logic                  	= 0 bits
Address Mask                         	= 0x07FFFF

Available field   xxxxxxxxxxxxxxxxxxxxxxxx
Hardware          PPPPPPPPAAAAAAAAAAAAAAAA
Application usage      PPPAAAAAAAAAAAAAAAA

Label        Page Bit     start       end       Mem          comments
y=page(don't care)
fs0          0byyyyy000   0x8000      0xFFFF    F            // & !pdn
fs1          0byyyyy001   0x8000      0xFFFF    F            // & !pdn
fs2          0byyyyy010   0x8000      0xFFFF    F            // & !pdn
fs3          0byyyyy011   0x8000      0xFFFF    F            // & !pdn
fs4          0byyyyy100   0x8000      0xFFFF    F            // & !pdn
fs5          0byyyyy101   0x8000      0xFFFF    F            // & !pdn
fs6          0byyyyy110   0x8000      0xFFFF    F            // & !pdn
fs7          0byyyyy111   0x8000      0xFFFF    F            // & !pdn
csboot0      0byyyyyyyy   0x0000      0x1FFF    F            // & !pdn
csboot1      0byyyyyyyy   0x2000      0x3FFF    F            // & !pdn
csboot2      0byyyyyyyy   0x4000      0x5FFF    F            // & !pdn
csboot3      0byyyyyyyy   0x6000      0x7FFF    F            // & !pdn
rs0          0byyyyyyyy   0x0000      0x1FFF    V            // & !pdn
csiop        0byyyyyyyy   0x3000      0x30FF    V            // & !pdn
!vfd_add     0byyyyyyyy   0x4000      0x40FF    Peripheral   //