hw_config.c

STM32F10xxx USB开发者套件

/******************** (C) COPYRIGHT 2007 STMicroelectronics ********************
* File Name          : hw_config.c
* Author             : MCD Application Team
* Version            : V1.0
* Date               : 10/08/2007
* Description        : Hardware Configuration & Setup
********************************************************************************
* THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
* CONTENT OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*******************************************************************************/

/* Includes ------------------------------------------------------------------*/
#include "stm32f10x_lib.h"
#include "spi_flash.h"
#include "hw_config.h"

/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/  
ErrorStatus HSEStartUpStatus;

/* Extern variables ----------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/

/*******************************************************************************
* Function Name  : Set_System.
* Description    : Configures Main system clocks & power.
* Input          : None.
* Output         : None.
* Return         : None.
*******************************************************************************/
void Set_System(void)
{
  GPIO_InitTypeDef GPIO_InitStructure;
  
  FLASH_Unlock(); 

  /* RCC system reset(for debug purpose) */
  RCC_DeInit();

  /* Enable HSE */
  RCC_HSEConfig(RCC_HSE_ON);

  /* Wait till HSE is ready */
  HSEStartUpStatus = RCC_WaitForHSEStartUp();

  if(HSEStartUpStatus == SUCCESS)
  {
    /* Enable Prefetch Buffer */
    FLASH_PrefetchBufferCmd(FLASH_PrefetchBuffer_Enable);

    /* Flash 2 wait state */
    FLASH_SetLatency(FLASH_Latency_2);
 
    /* HCLK = SYSCLK */
    RCC_HCLKConfig(RCC_SYSCLK_Div1); 
  
    /* PCLK2 = HCLK */
    RCC_PCLK2Config(RCC_HCLK_Div1); 

    /* PCLK1 = HCLK/2 */
    RCC_PCLK1Config(RCC_HCLK_Div2);

    /* PLLCLK = 8MHz * 9 = 72 MHz */
    RCC_PLLConfig(RCC_PLLSource_HSE_Div1, RCC_PLLMul_9);

    /* Enable PLL */ 
    RCC_PLLCmd(ENABLE);

    /* Wait till PLL is ready */
    while(RCC_GetFlagStatus(RCC_FLAG_PLLRDY) == RESET)
    {
    }

    /* Select PLL as system clock source */
    RCC_SYSCLKConfig(RCC_SYSCLKSource_PLLCLK);

    /* Wait till PLL is used as system clock source */
    while(RCC_GetSYSCLKSource() != 0x08)
    {
    }

    /* USBCLK = PLLCLK / 1.5 */
    RCC_USBCLKConfig(RCC_USBCLKSource_PLLCLK_1Div5);
    /* Enable USB clock */
    RCC_APB1PeriphClockCmd(RCC_APB1Periph_USB, ENABLE);
  }

  /* Enable GPIOD clock */
  RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOD, ENABLE);
  
  /* PD.09 used as USB pull-up */
  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9;
  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_OD;
  GPIO_Init(GPIOD, &GPIO_InitStructure);
  
  USB_Cable_Config (DISABLE);
  SPI_FLASH_Init();
  USB_Cable_Config (ENABLE);
}

/*******************************************************************************
* Function Name  : Set_USBClock.
* Description    : Configures USB Clock input (48MHz).
* Input          : None.
* Output         : None.
* Return         : None.
*******************************************************************************/
void Set_USBClock(void)
{
  /* Set USB kernel clock to 48 MHz */
}

/*******************************************************************************
* Function Name  : Enter_LowPowerMode.
* Description    : Power-off system clocks and power while entering suspend mode.
* Input          : None.
* Output         : None.
* Return         : None.
*******************************************************************************/
void Enter_LowPowerMode(void)
{
}

/*******************************************************************************
* Function Name  : Leave_LowPowerMode.
* Description    : Restores system clocks and power while exiting suspend mode.
* Input          : None.
* Output         : None.
* Return         : None.
*******************************************************************************/
void Leave_LowPowerMode(void)
{
}
/*******************************************************************************
* Function Name  : USB_Cable_Config.
* Description    : Software Connection/Disconnection of USB Cable.
* Input          : NewState: new state.
* Output         : None.
* Return         : None.
*******************************************************************************/
void USB_Cable_Config (FunctionalState NewState)
{
  if (NewState != DISABLE)
  {
    GPIO_ResetBits(GPIOD, GPIO_Pin_9);
  }
  else
  {
    GPIO_SetBits(GPIOD, GPIO_Pin_9);
  }    
}

/*******************************************************************************
* Function Name  : DFU_Button_Config.
* Description    : Configures the DFU selector Button to enter DFU Mode.
* Input          : None.
* Output         : None.
* Return         : None.
*******************************************************************************/
void DFU_Button_Config(void)
{
  GPIO_InitTypeDef GPIO_InitStructure;
  
  /* Enable GPIOB clock */
  RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE);
  
  /* Configure PD.09 as input floating (Key push-button on Eval Board) */
  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9;
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
  GPIO_Init(GPIOB, &GPIO_InitStructure);
}

/*******************************************************************************
* Function Name  : DFU_Button_Read.
* Description    : Reads the DFU selector Button to enter DFU Mode.
* Input          : None.
* Output         : None.
* Return         : Status
*******************************************************************************/
u8 DFU_Button_Read (void)
{
  return GPIO_ReadInputDataBit(GPIOB, GPIO_Pin_9);
}

/*******************************************************************************
* Function Name  : USB_Interrupts_Config.
* Description    : Configures the USB interrupts.
* Input          : None.
* Output         : None.
* Return         : None.
*******************************************************************************/
void USB_Interrupts_Config(void)
{
  NVIC_InitTypeDef NVIC_InitStructure;
 
  /* Set the Vector Table base address at 0x08000000 */
  NVIC_SetVectorTable(NVIC_VectTab_FLASH, 0x00);
  
  NVIC_InitStructure.NVIC_IRQChannel = USB_LP_CAN_RX0_IRQChannel;
  NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;
  NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
  NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
  NVIC_Init(&NVIC_InitStructure);
}

/*******************************************************************************
* Function Name  : Reset_Device.
* Description    : Reset the device.
* Input          : None.
* Output         : None.
* Return         : None.
*******************************************************************************/
void Reset_Device(void)
{
  USB_Cable_Config(DISABLE);
  NVIC_GenerateSystemReset();
}

/*******************************************************************************
* Function Name  : Internal_FLASH_WordWrite.
* Description    : Writes a Word in the Flash
* Input          : - Address of the Destination.
*                  - Word to program at Address.
* Output         : None.
* Return         : None.
*******************************************************************************/
void Internal_FLASH_WordWrite(u32 XtargetAdd, u32 Xdata)
{
  FLASH_ProgramWord(XtargetAdd, Xdata);
}
/*******************************************************************************
* Function Name  : Internal_FLASH_SectorErase.
* Description    : Erases a Flash sector 
* Input          : Sectors to be Erased.
* Output         : None.
* Return         : None.
*******************************************************************************/
void Internal_FLASH_PageErase(u32 XPage)
{
  FLASH_ErasePage(XPage);
}

/*******************************************************************************
* Function Name  : FLASH_WritePrConfig.
* Description    : Enable Write protection or Disable temporarily Write
*                  protection of a flash sector.
* Input          : - Flash Sector.
*                  - Enable or disable Flash sector Write Protection.
* Output         : None.
* Return         : None.
*******************************************************************************/
void Internal_FLASH_WritePrConfig(u32 Xsectors, FunctionalState NewState)
{
}

/******************* (C) COPYRIGHT 2007 STMicroelectronics *****END OF FILE****/