month1.fit

能自动记时

-- MAX+plus II Compiler Fit File      
-- Version 10.2 07/10/2002            
-- Compiled: 06/28/2007 03:23:07      

-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "month1"
BEGIN

    DEVICE = "EP1K10TC100-1";

    "clkd"                         : INPUT_PIN  = 39     ;
    "reset"                        : INPUT_PIN  = 38     ;
    "enyear"                       : OUTPUT_PIN = 7      ;
    "month00"                      : OUTPUT_PIN = 68     ;
    "month01"                      : OUTPUT_PIN = 5      ;
    "month02"                      : OUTPUT_PIN = 69     ;
    "month03"                      : OUTPUT_PIN = 70     ;
    "month10"                      : OUTPUT_PIN = 8      ;
    "month11"                      : OUTPUT_PIN = 71     ;
    "month12"                      : OUTPUT_PIN = 10     ;
    "month13"                      : OUTPUT_PIN = 6      ;
    "|LPM_ADD_SUB:144|addcore:adder|:55" : LOCATION   = LC4_A5 ;
    "reset~1"                      : LOCATION   = LC7_A5 ;
    ":20"                          : LOCATION   = LC3_A5 ;
    ":24"                          : LOCATION   = LC2_A5 ;  -- cq13
    ":25"                          : LOCATION   = LC8_A5 ;  -- cq12
    ":26"                          : LOCATION   = LC1_A5 ;  -- cq11
    ":27"                          : LOCATION   = LC5_A5 ;  -- cq10
    ":28"                          : LOCATION   = LC2_A2 ;  -- cq03
    ":29"                          : LOCATION   = LC8_A2 ;  -- cq02
    ":30"                          : LOCATION   = LC1_A2 ;  -- cq01
    ":31"                          : LOCATION   = LC6_A2 ;  -- cq00
    ":69"                          : LOCATION   = LC7_A2 ;
    "~69~1"                        : LOCATION   = LC4_A2 ;
    "~69~2"                        : LOCATION   = LC6_A5 ;
    ":135"                         : LOCATION   = LC3_A2 ;

END;

INTERNAL_INFO "month1"
BEGIN
	DEVICE = EP1K10TC100-1;
    OD5P39  : LORAX = "1:FB5->LC3_A5,->LC2_A5,->LC8_A5,->LC1_A5,->LC5_A5,->LC2_A2,->LC8_A2,->LC1_A2,->LC6_A2|";
    OD2P38  : LORAX = "1:FB2->LC2_A5,->LC8_A5,->LC1_A5,->LC5_A5,->LC2_A2,->LC8_A2,->LC1_A2,->LC6_A2|2:FH2R0,PA6R0C4->LC7_A5,->LC2_A5,->LC8_A5,->LC1_A5,->LC5_A5||";
    LC3_A5  : LORAX = "1:MSW2R0C5,G6R0->OH2R0P7|";
    LC2_A5  : LORAX = "1:MSW1R0C5,G11R0->OH1R0P6,2:PA2R0C1->LC7_A2||";
    LC8_A5  : LORAX = "1:MSW7R0C5,G88R0->OH7R0P10|";
    LC1_A5  : LORAX = "1:MSW0R0C5,HHL20R0->OH8R0P71|";
    LC5_A5  : LORAX = "1:MSW4R0C4,G62R0->OH4R0P8|";
    LC2_A2  : LORAX = "1:MSW2R0C0,HHL3R0->OH10R0P70|";
    LC8_A2  : LORAX = "1:MSW4R0C0,G50R0->OH12R0P69|";
    LC1_A2  : LORAX = "1:MSW0R0C1,G44R0->OH0R0P5|";
    LC6_A2  : LORAX = "1:MSW6R0C0,G79R0->OH14R0P68|";
    LC6_A5  : LORAX = "1:MSW5R0C5,G89R0,PA9R0C1->LC7_A2|";
    LC7_A2  : LORAX = "1:MSW6R0C1,G53R0,PA9R0C4->LC3_A5,->LC5_A5|";
    LC3_A2  : LORAX = "1:MSW3R0C0,G21R0,PA12R0C4->LC2_A5,->LC8_A5,->LC1_A5,->LC5_A5|";
	LC4_A5  : LORAX2 = "X, X, LC5_A5, LC1_A5";
	LC7_A5  : LORAX2 = "X, X, X, OD2P38";
	LC3_A5  : LORAX2 = "LC7_A5, X, X, LC7_A2";
	LC2_A5  : LORAX2 = "LC3_A2, LC4_A5, LC2_A5, LC8_A5";
	LC8_A5  : LORAX2 = "LC3_A2, LC8_A5, LC1_A5, LC5_A5";
	LC1_A5  : LORAX2 = "X, LC3_A2, LC1_A5, LC5_A5";
	LC5_A5  : LORAX2 = "X, LC3_A2, LC7_A2, LC5_A5";
	LC2_A2  : LORAX2 = "LC8_A2, LC2_A2, LC6_A2, LC1_A2";
	LC8_A2  : LORAX2 = "LC3_A2, LC8_A2, LC1_A2, LC6_A2";
	LC1_A2  : LORAX2 = "LC3_A2, LC7_A2, LC1_A2, LC6_A2";
	LC6_A2  : LORAX2 = "X, LC3_A2, LC7_A2, LC6_A2";
	LC4_A2  : LORAX2 = "X, LC6_A2, LC1_A2, LC8_A2";
	LC6_A5  : LORAX2 = "X, LC5_A5, LC1_A5, LC8_A5";
	LC7_A2  : LORAX2 = "LC6_A5, LC4_A2, LC2_A5, LC2_A2";
	LC3_A2  : LORAX2 = "LC8_A2, LC2_A2, LC6_A2, LC1_A2";
END;