📄 psocconfig.lis
字号:
0000 macro Suspend_CodeCompressor
0000 or F, 0
0000 macro Resume_CodeCompressor
0000 add SP, 0
0003 SYSTEM_STACK_PAGE: equ 3
0000 SYSTEM_STACK_BASE_ADDR: equ 0h
0001 SYSTEM_LARGE_MEMORY_MODEL: equ 1
0000 SYSTEM_SMALL_MEMORY_MODEL: equ 0
0001 SYSTEM_TOOLS: equ 1
0001 SYSTEM_IDXPG_TRACKS_STK_PP: equ 1
0000 SYSTEM_IDXPG_TRACKS_IDX_PP: equ 0
0000 SYSTEM_MULTIPAGE_STACK: equ 0
0000
0000
0000 ; ******* Function Class Definitions *******
0000 ;
0000 ; These definitions are used to describe RAM access patterns. They provide
0000 ; documentation and they control prologue and epilogue macros that perform
0000 ; the necessary housekeeping functions for large memory model devices like
0000 ; the CY8C24x94 and CY8C29x66.
0000
0001 RAM_USE_CLASS_1: equ 1 ; PUSH, POP & I/O access
0002 RAM_USE_CLASS_2: equ 2 ; Indexed address mode on stack page
0004 RAM_USE_CLASS_3: equ 4 ; Indexed address mode to any page
0008 RAM_USE_CLASS_4: equ 8 ; Direct/Indirect address mode access
0000
0000
0000 ; ******* Page Pointer Manipulation Macros *******
0000 ;
0000 ; Most of the following macros are conditionally compiled so they only
0000 ; produce code if the large memory model is selected.
0000
0000 ;-----------------------------------------------
0000 ; Set Stack Page Macro
0000 ;-----------------------------------------------
0000 ;
0000 ; DESC: Modify STK_PP in the large or small memory Models.
0000 ;
0000 ; INPUT: Constant (e.g., SYSTEM_STACK_PAGE) that specifies the RAM page on
0000 ; which stack operations like PUSH and POP store and retrieve their
0000 ; data
0000 ;
0000 ; COST: 8 instruction cycles (in LMM only)
0000
0000 macro RAM_SETPAGE_STK( PG_NUMBER )
0000 IF ( SYSTEM_LARGE_MEMORY_MODEL )
0000 mov reg[STK_PP], @PG_NUMBER
0000 ENDIF
0000 macro RAM_SETPAGE_CUR( PG_NUMBER )
0000 IF ( SYSTEM_LARGE_MEMORY_MODEL )
0000 mov reg[CUR_PP], @PG_NUMBER
0000 ENDIF
0000 macro RAM_SETPAGE_IDX( PG_NUMBER )
0000 IF ( SYSTEM_LARGE_MEMORY_MODEL )
0000 mov reg[IDX_PP], @PG_NUMBER
0000 ENDIF
0000 macro RAM_SETPAGE_MVR( PG_NUMBER )
0000 IF ( SYSTEM_LARGE_MEMORY_MODEL )
0000 mov reg[MVR_PP], @PG_NUMBER
0000 ENDIF
0000 macro RAM_SETPAGE_MVW( PG_NUMBER )
0000 IF ( SYSTEM_LARGE_MEMORY_MODEL )
0000 mov reg[MVW_PP], @PG_NUMBER
0000 ENDIF
0000 macro RAM_SETPAGE_IDX2STK
0000 IF ( SYSTEM_LARGE_MEMORY_MODEL )
0000 IF ( SYSTEM_MULTIPAGE_STACK )
0000 mov A, reg[STK_PP]
0000 mov reg[IDX_PP], A
0000 ELSE
0000 RAM_SETPAGE_IDX SYSTEM_STACK_PAGE
0000 ENDIF
0000 ENDIF
0000 macro RAM_CHANGE_PAGE_MODE( MODE )
0000 IF ( SYSTEM_LARGE_MEMORY_MODEL )
0000 and F, ~FLAG_PGMODE_MASK ; NOTE: transition thru 00b state
0000 or F, FLAG_PGMODE_MASK & @MODE
0000 ENDIF
0000 macro RAM_SET_NATIVE_PAGING
0000 IF ( SYSTEM_LARGE_MEMORY_MODEL )
0000 IF ( SYSTEM_IDXPG_TRACKS_STK_PP )
0000 or F, FLAG_PGMODE_11b ; LMM w/ IndexPage<==>StackPage
0000 ENDIF ; PGMODE LOCKED
0000 IF ( SYSTEM_IDXPG_TRACKS_IDX_PP )
0000 or F, FLAG_PGMODE_10b ; LMM with independent IndexPage
0000 ENDIF ; PGMODE FREE
0000 ENDIF ; SYSTEM_LARGE_MEMORY_MODEL
0000 macro RAM_RESTORE_NATIVE_PAGING
0000 IF ( SYSTEM_LARGE_MEMORY_MODEL )
0000 IF ( SYSTEM_IDXPG_TRACKS_STK_PP )
0000 RAM_CHANGE_PAGE_MODE FLAG_PGMODE_11b ; LMM w/ IndexPage<==>StackPage
0000 ENDIF ; PGMODE LOCKED
0000 IF ( SYSTEM_IDXPG_TRACKS_IDX_PP )
0000 RAM_CHANGE_PAGE_MODE FLAG_PGMODE_10b ; LMM with independent IndexPage
0000 ENDIF ; PGMODE FREE
0000 ENDIF ; SYSTEM_LARGE_MEMORY_MODEL
0000 macro RAM_X_POINTS_TO_STACKPAGE
0000 IF ( SYSTEM_LARGE_MEMORY_MODEL )
0000 or F, FLAG_PGMODE_01b
0000 ENDIF ; SYSTEM_LARGE_MEMORY_MODEL
0000 macro RAM_X_POINTS_TO_INDEXPAGE
0000 IF ( SYSTEM_LARGE_MEMORY_MODEL )
0000 and F, ~FLAG_PGMODE_01b
0000 ENDIF ; SYSTEM_LARGE_MEMORY_MODEL
0000 macro RAM_PROLOGUE( ACTUAL_CLASS )
0000
0000 IF ( @ACTUAL_CLASS & RAM_USE_CLASS_1 )
0000 ; Nothing to do
0000 ENDIF ; RAM_USE_CLASS_1
0000
0000 IF ( @ACTUAL_CLASS & RAM_USE_CLASS_2 )
0000 IF ( SYSTEM_IDXPG_TRACKS_IDX_PP )
0000 RAM_X_POINTS_TO_STACKPAGE ; exit native paging mode!
0000 ENDIF
0000 ENDIF ; RAM_USE_CLASS_2
0000
0000 IF ( @ACTUAL_CLASS & RAM_USE_CLASS_3 )
0000 IF ( SYSTEM_IDXPG_TRACKS_STK_PP )
0000 RAM_X_POINTS_TO_INDEXPAGE ; exit native paging mode!
0000 ENDIF
0000 ENDIF ; RAM_USE_CLASS_3
0000
0000 IF ( @ACTUAL_CLASS & RAM_USE_CLASS_4 )
0000 ; Nothing to do
0000 ENDIF ; RAM_USE_CLASS_4
0000
0000 macro RAM_EPILOGUE( ACTUAL_CLASS )
0000
0000 IF ( @ACTUAL_CLASS & RAM_USE_CLASS_1 )
0000 ; Nothing to do
0000 ENDIF ; RAM_USE_CLASS_1
0000
0000 IF ( @ACTUAL_CLASS & RAM_USE_CLASS_2 )
0000 RAM_RESTORE_NATIVE_PAGING
0000 ENDIF ; RAM_USE_CLASS_2
0000
0000 IF ( @ACTUAL_CLASS & RAM_USE_CLASS_3 )
0000 RAM_RESTORE_NATIVE_PAGING
0000 ENDIF ; RAM_USE_CLASS_3
0000
0000 IF ( @ACTUAL_CLASS & RAM_USE_CLASS_4 )
0000 ; Nothing to do
0000 ENDIF ; RAM_USE_CLASS_4
0000
0000 macro REG_PRESERVE( IOReg )
0000 mov A, reg[ @IOReg ]
0000 push A
0000 macro REG_RESTORE( IOReg )
0000 pop A
0000 mov reg[ @IOReg ], A
0000 macro ISR_PRESERVE_PAGE_POINTERS
0000 IF ( SYSTEM_LARGE_MEMORY_MODEL )
0000 REG_PRESERVE PRV_PP
0000 REG_PRESERVE CUR_PP
0000 REG_PRESERVE IDX_PP
0000 REG_PRESERVE MVR_PP
0000 REG_PRESERVE MVW_PP
0000 ENDIF
0000 macro ISR_RESTORE_PAGE_POINTERS
0000 IF ( SYSTEM_LARGE_MEMORY_MODEL )
0000 REG_RESTORE MVW_PP
0000 REG_RESTORE MVR_PP
0000 REG_RESTORE IDX_PP
0000 REG_RESTORE CUR_PP
0000 REG_RESTORE PRV_PP
0000 ENDIF
0000 CPU_CLOCK: equ 0h ;CPU clock value
0007 CPU_CLOCK_MASK: equ 7h ;CPU clock mask
0000 CPU_CLOCK_JUST: equ 0h ;CPU clock value justified
0000 SLEEP_TIMER: equ 0h ;Sleep Timer value
0018 SLEEP_TIMER_MASK: equ 18h ;Sleep Timer mask
0000 SLEEP_TIMER_JUST: equ 0h ;Sleep Timer value justified
0000 LVD_TBEN: equ 0 ; Low Voltage Throttle-back enable value
0008 LVD_TBEN_MASK: equ 8 ; Low Voltage Throttle-back enable mask
0000 LVD_TBEN_JUST: equ 0 ; Low Voltage Throttle-back enable justified
0007 TRIP_VOLTAGE: equ 7h ;Trip Voltage value
0007 TRIP_VOLTAGE_MASK: equ 7h ;Trip Voltage mask
0007 TRIP_VOLTAGE_JUST: equ 7h ;Trip Voltage justified
0000
0010 POWER_SETTING: equ 10h
0010 POWER_SET_5V0: equ 10h ; MASK for 5.0V operation, fast and slow
0010 POWER_SET_5V0_24MHZ: equ 10h ; Power Setting value for 5.0V fast
0008 POWER_SET_3V3: equ 08h ; MASK for 3.3V operation, fast and slow
0008 POWER_SET_3V3_24MHZ: equ 08h ; Power Setting value for 3.3V fast
0000
0000 COMM_RX_PRESENT: equ 0 ;1 = TRUE
0000 WATCHDOG_ENABLE: equ 0 ;Watchdog Enable 1 = Enable
0000
000B ⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -