test_gpio.c

Taiwan sunplus develop spce3200, it is a test program ----- testboard source code

//====================================================================================
//File Name:	Test_GPIO.c
//Description:	GPIO test
//Update:		V1.0 by wangtao <[e-mail]>
//====================================================================================
#include "SystemHeader.h"

short Test_GPIO(void)
{
	short x, y;
	short Ret = 1, ErrCode = 0;
	int i;
	STR_IMAGE Pic_GPIO = {160, 32, RES_GPIO_BIN};
	
	TFT_SetBGColor(0x0001);
	TFT_SetWindow(0, 0, TFT_WIDTH-1, TFT_HEIGHT-1);

	TFT_SetBGColor(COLOR_WHITE);
	TFT_SetWindow(40, 40, 279, 199);
	TFT_SetColor(COLOR_RED);
	TFT_Rectangle(0, 0, 239, 159, PAINT_HOLLOW);
	TFT_SetColor(COLOR_BLUE);
	TFT_SetWindow(60, 60, 259, 119);
	TFT_SetTextPos(0, 0);
	TFT_Print("Please connect the two rows of \"Sensor (J8)\" pin header and click any position on the screen to continue.");
	TFT_SetWindow(80, 130, 240, 190);
	TFT_PutImage(0, 0, &Pic_GPIO);
	while(1)
	{
		Touch_Get(&x, &y);
		if(x!=-1) break;
	}
	for(i=0; i<1000000; i++);
	
	TFT_SetBGColor(COLOR_WHITE);
	TFT_SetWindow(40, 40, 279, 199);
	TFT_SetColor(COLOR_RED);
	TFT_Rectangle(0, 0, 239, 159, PAINT_HOLLOW);
	TFT_SetColor(COLOR_BLUE);
	TFT_SetWindow(70, 100, 259, 189);
	TFT_SetTextPos(0, 0);
	TFT_Print("GPIO test...");

	/////////////////////////////////////////////////////////////////////////////////////////////
	//	I/O assignments:
	//   + - CSI_VS I2C_CLK CSI_CKO CSI_FLD CSI_D1/D3/D5/D7 X A0  A1  B0  B1  B2  B3  B4  B5  -
	//	 + - CSI_HS I2C_DAT CSI_CKI RESETN  CSI_D0/D2/D4/D6 X CH0 CH1 CH2 CH3 CH4 CH5 CH6 CH7 -
	*P_GPIO_CLK_CONF = C_GPIO_CLK_EN | C_GPIO_RST_DIS;
	*P_CSI_INTERFACE_SEL &= ~0x00000300;
	*P_I2C_INTERFACE_SEL &= ~0x00000001;
	*P_ADC_AINPUT_CTRL = 0x000000;

	// 1. Output 10101... via upper row, and input via lower row
	*P_CSI_GPIO_SETUP = 0x09AA0888;
	*P_CSI_GPIO_PULL = 0x1FFF1FFF;
	*P_I2C_GPIO_SETUP = 0x01010100;
	*P_IOA_GPIO_SETUP = 0x03030301;
	*P_IOB_GPIO_SETUP = 0x1F1F1F15;
	*P_ADC_GPIO_SETUP = 0xFFFF0000;
	if(*P_CSI_GPIO_INPUT!=0x00001CCC)
	{
		Ret = 0;
		ErrCode = 1;
	}
	if(*P_ADC_GPIO_INPUT!=0x00000055)
	{
		Ret = 0;
		ErrCode = 2;
	}
	if((*P_I2C_GPIO_INPUT & 0x03000000)!=0x00000000)
	{
		Ret = 0;
		ErrCode = 3;
	}

	// 2. Output 01010... via upper row, and input via lower row
	*P_CSI_GPIO_SETUP = 0x09AA0122;
	*P_CSI_GPIO_PULL = 0x1FFF1FFF;
	*P_I2C_GPIO_SETUP = 0x01010101;
	*P_IOA_GPIO_SETUP = 0x03030302;
	*P_IOB_GPIO_SETUP = 0x1F1F1F2A;
	*P_ADC_GPIO_SETUP = 0xFFFF0000;
	if(*P_CSI_GPIO_INPUT!=0x00001333)
	{
		Ret = 0;
		ErrCode = 1;
	}
	if((*P_I2C_GPIO_INPUT & 0x03000000)!=0x03000000)
	{
		Ret = 0;
		ErrCode = 2;
	}
	if(*P_ADC_GPIO_INPUT!=0x000000AA)
	{
		Ret = 0;
		ErrCode = 3;
	}

	// 3. Input via upper row, and output 10101... via lower row
	*P_CSI_GPIO_SETUP = 0x06550444;
	*P_CSI_GPIO_PULL = 0x1FFF1FFF;
	*P_I2C_GPIO_SETUP = 0x02020200;
	*P_IOA_GPIO_SETUP = 0x03030000;
	*P_IOB_GPIO_SETUP = 0x1F1F0000;
	*P_ADC_GPIO_SETUP = 0xFFFFFF55;
	if(*P_CSI_GPIO_INPUT!=0x00001CCC)
	{
		Ret = 0;
		ErrCode = 1;
	}
	if((*P_I2C_GPIO_INPUT & 0x03000000)!=0x00000000)
	{
		Ret = 0;
		ErrCode = 2;
	}
	if((*P_IOA_GPIO_INPUT & 0x00000003)!=0x00000001)
	{
		Ret = 0;
		ErrCode = 3;
	}
	if((*P_IOB_GPIO_INPUT & 0x00003F00)!=0x00001500)
	{
		Ret = 0;
		ErrCode = 4;
	}

	// 4. Input via upper row, and output 01010... via lower row
	*P_CSI_GPIO_SETUP = 0x06550211;
	*P_CSI_GPIO_PULL = 0x1FFF1FFF;
	*P_I2C_GPIO_SETUP = 0x02020202;
	*P_IOA_GPIO_SETUP = 0x03030000;
	*P_IOB_GPIO_SETUP = 0x1F1F0000;
	*P_ADC_GPIO_SETUP = 0xFFFFFFAA;
	if(*P_CSI_GPIO_INPUT!=0x00001333)
	{
		Ret = 0;
		ErrCode = 1;
	}
	if((*P_I2C_GPIO_INPUT & 0x03000000)!=0x03000000)
	{
		Ret = 0;
		ErrCode = 2;
	}
	if((*P_IOA_GPIO_INPUT & 0x00000003)!=0x00000002)
	{
		Ret = 0;
		ErrCode = 3;
	}
	if((*P_IOB_GPIO_INPUT & 0x00003F00)!=0x00002A00)
	{
		Ret = 0;
		ErrCode = 4;
	}
	
	if(Ret==1)
	{
		TFT_Print("Successful!");
	}
	else
	{
		TFT_SetColor(COLOR_RED);
		TFT_Print("Failed!");
		TFT_SetColor(COLOR_BLUE);
		TFT_Print("Please check");
		switch(ErrCode)
		{
			case 1:
				TFT_Print("CSI");
				break;
			case 2:
				TFT_Print("I2C");
				break;
			case 3:
				TFT_Print("ADC and IOA/B");
				break;
			case 4:
				TFT_Print("ADC and IOB");
				break;
		}
	}
	TFT_SetTextPos(0, 70);
	TFT_SetColor(COLOR_BLUE);
	TFT_Print("Click any position in the screen to return");
	Touch_Init();
	while(1)
	{
		Touch_Get(&x, &y);
		if(x!=-1) break;
	}
	for(i=0; i<1000000; i++);

	TFT_SetBGColor(0x0001);
	TFT_SetWindow(0, 0, TFT_WIDTH-1, TFT_HEIGHT-1);
	return Ret;
}