belkin_sa.c

ep9315平台下USB驱动的源码

/*
 * Belkin USB Serial Adapter Driver
 *
 *  Copyright (C) 2000		William Greathouse ([e-mail])
 *  Copyright (C) 2000-2001 	Greg Kroah-Hartman ([e-mail])
 *
 *  This program is largely derived from work by the linux-usb group
 *  and associated source files.  Please see the usb/serial files for
 *  individual credits and copyrights.
 *  
 * 	This program is free software; you can redistribute it and/or modify
 * 	it under the terms of the GNU General Public License as published by
 * 	the Free Software Foundation; either version 2 of the License, or
 * 	(at your option) any later version.
 *
 * See Documentation/usb/usb-serial.txt for more information on using this driver
 *
 * TODO:
 * -- Add true modem contol line query capability.  Currently we track the
 *    states reported by the interrupt and the states we request.
 * -- Add error reporting back to application for UART error conditions.
 *    Just point me at how to implement this and I'll do it. I've put the
 *    framework in, but haven't analyzed the "tty_flip" interface yet.
 * -- Add support for flush commands
 * -- Add everything that is missing :)
 *
 * 27-Nov-2001 gkh
 * 	compressed all the differnent device entries into 1.
 *
 * 30-May-2001 gkh
 *	switched from using spinlock to a semaphore, which fixes lots of problems.
 *
 * 08-Apr-2001 gb
 *	- Identify version on module load.
 *
 * 12-Mar-2001 gkh
 *	- Added support for the GoHubs GO-COM232 device which is the same as the
 *	  Peracom device.
 *
 * 06-Nov-2000 gkh
 *	- Added support for the old Belkin and Peracom devices.
 *	- Made the port able to be opened multiple times.
 *	- Added some defaults incase the line settings are things these devices
 *	  can't support. 
 *
 * 18-Oct-2000 William Greathouse
 *    Released into the wild (linux-usb-devel)
 *
 * 17-Oct-2000 William Greathouse
 *    Add code to recognize firmware version and set hardware flow control
 *    appropriately.  Belkin states that firmware prior to 3.05 does not
 *    operate correctly in hardware handshake mode.  I have verified this
 *    on firmware 2.05 -- for both RTS and DTR input flow control, the control
 *    line is not reset.  The test performed by the Belkin Win* driver is
 *    to enable hardware flow control for firmware 2.06 or greater and
 *    for 1.00 or prior.  I am only enabling for 2.06 or greater.
 *
 * 12-Oct-2000 William Greathouse
 *    First cut at supporting Belkin USB Serial Adapter F5U103
 *    I did not have a copy of the original work to support this
 *    adapter, so pardon any stupid mistakes.  All of the information
 *    I am using to write this driver was acquired by using a modified
 *    UsbSnoop on Windows2000 and from examining the other USB drivers.
 */

#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
#include <linux/module.h>
#include <linux/spinlock.h>
#include <asm/uaccess.h>
#include <linux/usb.h>

#ifdef CONFIG_USB_SERIAL_DEBUG
 	static int debug = 1;
#else
 	static int debug;
#endif

#include "usb-serial.h"
#include "belkin_sa.h"

/*
 * Version Information
 */
#define DRIVER_VERSION "v1.2"
#define DRIVER_AUTHOR "William Greathouse <[e-mail]>"
#define DRIVER_DESC "USB Belkin Serial converter driver"

/* function prototypes for a Belkin USB Serial Adapter F5U103 */
static int  belkin_sa_startup		(struct usb_serial *serial);
static void belkin_sa_shutdown		(struct usb_serial *serial);
static int  belkin_sa_open		(struct usb_serial_port *port, struct file *filp);
static void belkin_sa_close		(struct usb_serial_port *port, struct file *filp);
static void belkin_sa_read_int_callback (struct urb *urb);
static void belkin_sa_set_termios	(struct usb_serial_port *port, struct termios * old);
static int  belkin_sa_ioctl		(struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg);
static void belkin_sa_break_ctl		(struct usb_serial_port *port, int break_state );


static struct usb_device_id id_table_combined [] = {
	{ USB_DEVICE(BELKIN_SA_VID, BELKIN_SA_PID) },
	{ USB_DEVICE(BELKIN_OLD_VID, BELKIN_OLD_PID) },
	{ USB_DEVICE(PERACOM_VID, PERACOM_PID) },
	{ USB_DEVICE(GOHUBS_VID, GOHUBS_PID) },
	{ USB_DEVICE(GOHUBS_VID, HANDYLINK_PID) },
	{ USB_DEVICE(BELKIN_DOCKSTATION_VID, BELKIN_DOCKSTATION_PID) },
	{ }							/* Terminating entry */
};

MODULE_DEVICE_TABLE (usb, id_table_combined);

/* All of the device info needed for the serial converters */
static struct usb_serial_device_type belkin_device = {
	.owner =		THIS_MODULE,
	.name =			"Belkin / Peracom / GoHubs USB Serial Adapter",
	.id_table =		id_table_combined,
	.num_interrupt_in =	1,
	.num_bulk_in =		1,
	.num_bulk_out =		1,
	.num_ports =		1,
	.open =			belkin_sa_open,
	.close =		belkin_sa_close,
	.read_int_callback =	belkin_sa_read_int_callback,	/* How we get the status info */
	.ioctl =		belkin_sa_ioctl,
	.set_termios =		belkin_sa_set_termios,
	.break_ctl =		belkin_sa_break_ctl,
	.startup =		belkin_sa_startup,
	.shutdown =		belkin_sa_shutdown,
};


struct belkin_sa_private {
	unsigned long		control_state;
	unsigned char		last_lsr;
	unsigned char		last_msr;
	int			bad_flow_control;
};


/*
 * ***************************************************************************
 * Belkin USB Serial Adapter F5U103 specific driver functions
 * ***************************************************************************
 */

#define WDR_TIMEOUT (HZ * 5 ) /* default urb timeout */

/* assumes that struct usb_serial *serial is available */
#define BSA_USB_CMD(c,v) usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), \
					    (c), BELKIN_SA_SET_REQUEST_TYPE, \
					    (v), 0, NULL, 0, WDR_TIMEOUT)

/* do some startup allocations not currently performed by usb_serial_probe() */
static int belkin_sa_startup (struct usb_serial *serial)
{
	struct usb_device *dev = serial->dev;
	struct belkin_sa_private *priv;

	/* allocate the private data structure */
	serial->port->private = kmalloc(sizeof(struct belkin_sa_private), GFP_KERNEL);
	if (!serial->port->private)
		return (-1); /* error */
	priv = (struct belkin_sa_private *)serial->port->private;
	/* set initial values for control structures */
	priv->control_state = 0;
	priv->last_lsr = 0;
	priv->last_msr = 0;
	/* see comments at top of file */
	priv->bad_flow_control = (dev->descriptor.bcdDevice <= 0x0206) ? 1 : 0;
	info("bcdDevice: %04x, bfc: %d", dev->descriptor.bcdDevice, priv->bad_flow_control);

	init_waitqueue_head(&serial->port->write_wait);
	
	return (0);
}


static void belkin_sa_shutdown (struct usb_serial *serial)
{
	int i;
	
	dbg ("%s", __FUNCTION__);

	/* stop reads and writes on all ports */
	for (i=0; i < serial->num_ports; ++i) {
		/* My special items, the standard routines free my urbs */
		if (serial->port[i].private)
			kfree(serial->port[i].private);
	}
}


static int  belkin_sa_open (struct usb_serial_port *port, struct file *filp)
{
	int retval = 0;

	dbg("%s port %d", __FUNCTION__, port->number);

	/*Start reading from the device*/
	/* TODO: Look at possibility of submitting mulitple URBs to device to
	 *       enhance buffering.  Win trace shows 16 initial read URBs.
	 */
	port->read_urb->dev = port->serial->dev;
	retval = usb_submit_urb(port->read_urb);
	if (retval) {
		err("usb_submit_urb(read bulk) failed");
		goto exit;
	}

	port->interrupt_in_urb->dev = port->serial->dev;
	retval = usb_submit_urb(port->interrupt_in_urb);
	if (retval)
		err(" usb_submit_urb(read int) failed");

exit:
	return retval;
} /* belkin_sa_open */


static void belkin_sa_close (struct usb_serial_port *port, struct file *filp)
{
	struct usb_serial *serial;

	if (port_paranoia_check (port, __FUNCTION__))
		return;

	serial = get_usb_serial (port, __FUNCTION__);
	if (!serial)
		return;

	dbg("%s port %d", __FUNCTION__, port->number);

	if (serial->dev) {
		/* shutdown our bulk reads and writes */
		usb_unlink_urb (port->write_urb);
		usb_unlink_urb (port->read_urb);
		usb_unlink_urb (port->interrupt_in_urb);
	}
} /* belkin_sa_close */


static void belkin_sa_read_int_callback (struct urb *urb)
{
	struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
	struct belkin_sa_private *priv;
	struct usb_serial *serial;
	unsigned char *data = urb->transfer_buffer;

	/* the urb might have been killed. */
	if (urb->status)
		return;
	
	if (port_paranoia_check (port, __FUNCTION__)) return;

	serial = port->serial;
	if (serial_paranoia_check (serial, __FUNCTION__)) return;
	
	usb_serial_debug_data (__FILE__, __FUNCTION__, urb->actual_length, data);

	/* Handle known interrupt data */
	/* ignore data[0] and data[1] */

	priv = (struct belkin_sa_private *)port->private;
	priv->last_msr = data[BELKIN_SA_MSR_INDEX];
	
	/* Record Control Line states */
	if (priv->last_msr & BELKIN_SA_MSR_DSR)
		priv->control_state |= TIOCM_DSR;
	else
		priv->control_state &= ~TIOCM_DSR;