ehci.h

ep9315平台下USB驱动的源码

#define	QTD_STS_HALT	(1 << 6)	/* halted on error */
#define	QTD_STS_DBE	(1 << 5)	/* data buffer error (in HC) */
#define	QTD_STS_BABBLE	(1 << 4)	/* device was babbling (qtd halted) */
#define	QTD_STS_XACT	(1 << 3)	/* device gave illegal response */
#define	QTD_STS_MMF	(1 << 2)	/* incomplete split transaction */
#define	QTD_STS_STS	(1 << 1)	/* split transaction state */
#define	QTD_STS_PING	(1 << 0)	/* issue PING? */
	u32			hw_buf [5];        /* see EHCI 3.5.4 */
	u32			hw_buf_hi [5];        /* Appendix B */

	/* the rest is HCD-private */
	dma_addr_t		qtd_dma;		/* qtd address */
	struct list_head	qtd_list;		/* sw qtd list */
	struct urb		*urb;			/* qtd's urb */
	size_t			length;			/* length of buffer */
} __attribute__ ((aligned (32)));

#define QTD_MASK cpu_to_le32 (~0x1f)	/* mask NakCnt+T in qh->hw_alt_next */

/*-------------------------------------------------------------------------*/

/* type tag from {qh,itd,sitd,fstn}->hw_next */
#define Q_NEXT_TYPE(dma) ((dma) & __constant_cpu_to_le32 (3 << 1))

/* values for that type tag */
#define Q_TYPE_ITD	__constant_cpu_to_le32 (0 << 1)
#define Q_TYPE_QH	__constant_cpu_to_le32 (1 << 1)
#define Q_TYPE_SITD 	__constant_cpu_to_le32 (2 << 1)
#define Q_TYPE_FSTN 	__constant_cpu_to_le32 (3 << 1)

/* next async queue entry, or pointer to interrupt/periodic QH */
#define	QH_NEXT(dma)	(cpu_to_le32(((u32)dma)&~0x01f)|Q_TYPE_QH)

/* for periodic/async schedules and qtd lists, mark end of list */
#define	EHCI_LIST_END	__constant_cpu_to_le32(1) /* "null pointer" to hw */

/*
 * Entries in periodic shadow table are pointers to one of four kinds
 * of data structure.  That's dictated by the hardware; a type tag is
 * encoded in the low bits of the hardware's periodic schedule.  Use
 * Q_NEXT_TYPE to get the tag.
 *
 * For entries in the async schedule, the type tag always says "qh".
 */
union ehci_shadow {
	struct ehci_qh 		*qh;		/* Q_TYPE_QH */
	struct ehci_itd		*itd;		/* Q_TYPE_ITD */
	struct ehci_sitd	*sitd;		/* Q_TYPE_SITD */
	struct ehci_fstn	*fstn;		/* Q_TYPE_FSTN */
	void			*ptr;
};

/*-------------------------------------------------------------------------*/

/*
 * EHCI Specification 0.95 Section 3.6
 * QH: describes control/bulk/interrupt endpoints
 * See Fig 3-7 "Queue Head Structure Layout".
 *
 * These appear in both the async and (for interrupt) periodic schedules.
 */

struct ehci_qh {
	/* first part defined by EHCI spec */
	u32			hw_next;	 /* see EHCI 3.6.1 */
	u32			hw_info1;        /* see EHCI 3.6.2 */
#define	QH_HEAD		0x00008000
	u32			hw_info2;        /* see EHCI 3.6.2 */
	u32			hw_current;	 /* qtd list - see EHCI 3.6.4 */
	
	/* qtd overlay (hardware parts of a struct ehci_qtd) */
	u32			hw_qtd_next;
	u32			hw_alt_next;
	u32			hw_token;
	u32			hw_buf [5];
	u32			hw_buf_hi [5];

	/* the rest is HCD-private */
	dma_addr_t		qh_dma;		/* address of qh */
	union ehci_shadow	qh_next;	/* ptr to qh; or periodic */
	struct list_head	qtd_list;	/* sw qtd list */
	struct ehci_qtd		*dummy;
	struct ehci_qh		*reclaim;	/* next to reclaim */

	atomic_t		refcount;
	unsigned		stamp;

	u8			qh_state;
#define	QH_STATE_LINKED		1		/* HC sees this */
#define	QH_STATE_UNLINK		2		/* HC may still see this */
#define	QH_STATE_IDLE		3		/* HC doesn't see this */
#define	QH_STATE_UNLINK_WAIT	4		/* LINKED and on reclaim q */
#define	QH_STATE_COMPLETING	5		/* don't touch token.HALT */

	/* periodic schedule info */
	u8			usecs;		/* intr bandwidth */
	u8			gap_uf;		/* uframes split/csplit gap */
	u8			c_usecs;	/* ... split completion bw */
	unsigned short		period;		/* polling interval */
	unsigned short		start;		/* where polling starts */
#define NO_FRAME ((unsigned short)~0)			/* pick new start */

} __attribute__ ((aligned (32)));

/*-------------------------------------------------------------------------*/

/*
 * EHCI Specification 0.95 Section 3.3
 * Fig 3-4 "Isochronous Transaction Descriptor (iTD)"
 *
 * Schedule records for high speed iso xfers
 */
struct ehci_itd {
	/* first part defined by EHCI spec */
	u32			hw_next;           /* see EHCI 3.3.1 */
	u32			hw_transaction [8]; /* see EHCI 3.3.2 */
#define EHCI_ISOC_ACTIVE        (1<<31)        /* activate transfer this slot */
#define EHCI_ISOC_BUF_ERR       (1<<30)        /* Data buffer error */
#define EHCI_ISOC_BABBLE        (1<<29)        /* babble detected */
#define EHCI_ISOC_XACTERR       (1<<28)        /* XactErr - transaction error */
#define	EHCI_ITD_LENGTH(tok)	(((tok)>>16) & 0x7fff)
#define	EHCI_ITD_IOC		(1 << 15)	/* interrupt on complete */

	u32			hw_bufp [7];	/* see EHCI 3.3.3 */ 
	u32			hw_bufp_hi [7];	/* Appendix B */

	/* the rest is HCD-private */
	dma_addr_t		itd_dma;	/* for this itd */
	union ehci_shadow	itd_next;	/* ptr to periodic q entry */

	struct urb		*urb;
	struct list_head	itd_list;	/* list of urb frames' itds */
	dma_addr_t		buf_dma;	/* frame's buffer address */

	/* for now, only one hw_transaction per itd */
	u32			transaction;
	u16			index;		/* in urb->iso_frame_desc */
	u16			uframe;		/* in periodic schedule */
	u16			usecs;
} __attribute__ ((aligned (32)));

/*-------------------------------------------------------------------------*/

/*
 * EHCI Specification 0.95 Section 3.4 
 * siTD, aka split-transaction isochronous Transfer Descriptor
 *       ... describe low/full speed iso xfers through TT in hubs
 * see Figure 3-5 "Split-transaction Isochronous Transaction Descriptor (siTD)
 */
struct ehci_sitd {
	/* first part defined by EHCI spec */
	u32			hw_next;
/* uses bit field macros above - see EHCI 0.95 Table 3-8 */
	u32			hw_fullspeed_ep;  /* see EHCI table 3-9 */
	u32                     hw_uframe;        /* see EHCI table 3-10 */
        u32                     hw_tx_results1;   /* see EHCI table 3-11 */
	u32                     hw_tx_results2;   /* see EHCI table 3-12 */
	u32                     hw_tx_results3;   /* see EHCI table 3-12 */
        u32                     hw_backpointer;   /* see EHCI table 3-13 */
	u32			hw_buf_hi [2];	  /* Appendix B */

	/* the rest is HCD-private */
	dma_addr_t		sitd_dma;
	union ehci_shadow	sitd_next;	/* ptr to periodic q entry */
	struct urb		*urb;
	dma_addr_t		buf_dma;	/* buffer address */

	unsigned short		usecs;		/* start bandwidth */
	unsigned short		c_usecs;	/* completion bandwidth */
} __attribute__ ((aligned (32)));

/*-------------------------------------------------------------------------*/

/*
 * EHCI Specification 0.96 Section 3.7
 * Periodic Frame Span Traversal Node (FSTN)
 *
 * Manages split interrupt transactions (using TT) that span frame boundaries
 * into uframes 0/1; see 4.12.2.2.  In those uframes, a "save place" FSTN
 * makes the HC jump (back) to a QH to scan for fs/ls QH completions until
 * it hits a "restore" FSTN; then it returns to finish other uframe 0/1 work.
 */
struct ehci_fstn {
	u32			hw_next;	/* any periodic q entry */
	u32			hw_prev;	/* qh or EHCI_LIST_END */

	/* the rest is HCD-private */
	dma_addr_t		fstn_dma;
	union ehci_shadow	fstn_next;	/* ptr to periodic q entry */
} __attribute__ ((aligned (32)));

/*-------------------------------------------------------------------------*/

#include <linux/version.h>
#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,32)

#define SUBMIT_URB(urb,mem_flags) usb_submit_urb(urb)
#define STUB_DEBUG_FILES

static inline int hcd_register_root (struct usb_hcd *hcd)
{
	return usb_new_device (hcd_to_bus (hcd)->root_hub);
}

#else	/* LINUX_VERSION_CODE */

// hcd_to_bus() eventually moves to hcd.h on 2.5 too
static inline struct usb_bus *hcd_to_bus (struct usb_hcd *hcd)
	{ return &hcd->self; }
// ... as does hcd_register_root()
static inline int hcd_register_root (struct usb_hcd *hcd)
{
	return usb_register_root_hub (
		hcd_to_bus (hcd)->root_hub, &hcd->pdev->dev);
}

#define SUBMIT_URB(urb,mem_flags) usb_submit_urb(urb,mem_flags)

#ifndef DEBUG
#define STUB_DEBUG_FILES
#endif	/* DEBUG */

#endif	/* LINUX_VERSION_CODE */

/*-------------------------------------------------------------------------*/

#endif /* __LINUX_EHCI_HCD_H */