readme2.txt

FOCAS2的HSSB开发包.做FANUC数控采集的必备.

29. Click [Yes] button to restart Windows 2000.


 (Note) To change HSSB driver setting, you must have the Administrator
        privilege.


==========================================================================
[5] Installation (Windows XP)
==========================================================================

    In Windows XP, only the PCI HSSB interface board is supported.

    When two or more PCI HSSB interface boards are installed, the nodes are
    allotted first from the PCI HSSB interface board inserted in lower PCI
    slot number.

    There are following two methods of installation procedures for the driver.

        A.  Method by the automatic detection by Windows
        B.  Method by the manual operation

-------------------------------------------------------------------------------
 A.  Method by the automatic detection by Windows

 1. When Windows is started, the PCI HSSB interface board is detected as "PCI
    Simple Communications Controller".
        [Found New Hardware Wizard] window is displayed.

 2. Select [Install from a list or specific location(advanced)], then click
    [Next] button.
        [Please choose your search and installation options] screen is
        displayed.

 3. Select [Search for the best driver in these locations], then check
    [include this location in the search] only.

 4. Set this CD onto the CD-ROM drive.

 5. Click [Browse] button, then select "d:\hssb\winxp" and click [Next] button.
    ("d:" is the drive letter for the CD-ROM.  If other drive letter is
    assigned to your drive, change it properly.)
        Files are copied.

 6. [Completing the Found New Hardware Wizard] is displayed.
    Click [Finish] button.

         The installation is automatically done if there are two or more PCI
        HSSB interface boards.

    Next, setup HSSB driver by the Control Panel. Remove the disk from the
    floppy drive.

 7. Click [Start] button, then click [Control Panel].

 8. Click [Other Control Panel Options] in the [See Also].
        [HSSB] icon is displayed, then click this.

 9. Select the node number that you want to attach the HSSB board and click
    [Setting...] button.

10. Enter proper name which indicates the machine connected to the HSSB board
    (for example, "FS160 - No.1", "Milling Machine") to [Node name] within 19
    characters.

11. Select CNC type from the [CNC Type] list box.

12. Click [OK] button to close this window.

13. In case of multiple HSSB connection, go back to step 9. and repeat these
    steps for each HSSB board.

14. Click [Close] button.


-------------------------------------------------------------------------------
 B. Method by the manual operation

 1. Click [Start] button.
        [Start] menu is displayed.

 2. Point [My Computer], then right-click this. And click [Properties] from menu.
        [System Properties] screen is displayed.

 3. Click [Hardware] tab, then click [Device Manager] button.
        [Device Manager] screen is displayed.

 4. Right-click the [PCI Simple Communications Controller] in [Other devices],
    then click [Properties] from popup menu.
        [PCI Simple Communications Controller Propertied] screen is displayed.

 5. Click [Driver] tab, then click [Update Driver...] button.
        [Haedware Update Wizard] screen is displayed.

 6. Select [Install from a list or specific location(advanced)], then click
    [Next] button.
        [Please choose your search and installation options] screen is
        displayed.

 7. Select [Search for the best driver in these locations], then check
    [include this location in the search] only.

 8. Set this CD onto the CD-ROM drive.

 9. Click [Browse] button, then select "d:\hssb\winxp" and click [Next] button.
    ("d:" is the drive letter for the CD-ROM.  If other drive letter is
    assigned to your drive, change it properly.)
        Files are copied.

10. [Completing the Found New Hardware Wizard] is displayed.
    Click [Finish] button.

11. Click [Close] button in [FANUC HSSB Type 2 (PCI X Channel) Propreties]
    screen.

12. Close [Device Manager] screen, then close [System Properties] screen.


    Next, setup HSSB driver by the Control Panel. Remove this CD from the
    CD-ROM drive.

13. Click [Start] button, then click [Control Panel].

14. Click [Other Control Panel Options] in the [See Also].
        [HSSB] icon is displayed, then click this.

15. Select the node number that you want to attach the HSSB board and click
    [Setting...] button.

16. Enter proper name which indicates the machine connected to the HSSB board
    (for example, "FS160 - No.1", "Milling Machine") to [Node name] within 19
    characters.

17. Select CNC type from the [CNC Type] list box.

18. Click [OK] button to close this window.

19. In case of multiple HSSB connection, go back to step 15. and repeat these
    steps for each HSSB board.

20. Click [Close] button.


==========================================================================
[6] Installation (Windows Vista)
==========================================================================

    In Windows Vista, only the PCI HSSB interface board is supported.

    When two or more PCI HSSB interface boards are installed, the nodes are
    allotted first from the PCI HSSB interface board inserted in lower PCI
    slot number.

    There are following two methods of installation procedures for the driver.

        A.  Method by the automatic detection by Windows
        B.  Method by the manual operation

-------------------------------------------------------------------------------
 A.  Method by the automatic detection by Windows

 1. When Windows is started, the PCI HSSB interface board is detected as "PCI
    Simple Communications Controller".
        [Found New Hardware] window is displayed.

 2. Click [Locate and install driver software(recommended)].

 3. Because the [User Account Control] window is displayed, click [Continue]
    button.

 4. [Found New Hardware - PCI Simple Communications Controller] window is
    displayed.
        Click [Don't search online].

 5. [Insert the disc that came with your PCI Simple Communications Controller]
    message is displayed on [Found New Hardware - PCI Simple Communications
    Controller] window.
        Click [I don't have the disc. Show me other options]

 6. [Windows couldn't find driver software for your device] message is
    displayed on [Found New Hardware - PCI Simple Communications Controller]
    window.
        Click [Browse my computer for driver software(advanced)]

 7. Set this CD onto the CD-ROM drive.

 8. [Browse for driver software on your computer] message is displayed on
    [Found New Hardware - PCI Simple Communications Controller] window.
        Click [Browse] button of [Search for driver software in this location],
        then select "d:\hssb\vista" and click [Next]
        button. ("d:" is the drive letter for the CD-ROM.  If other drive
        letter is assigned to your drive, change it properly.)

 9. [Windows can't verify the publisher of this driver software] message is
    displayed on [Windows Security] window.
        Click [Install this driver software anyway]

10. Driver software is automatically installed, then [Found New Hardware - 
    FANUC HSSB xxxxx (xxxxx: This message is different by HSSB board type.)]
    window is displayed.
        After [The software for this device has been successfully installed]
        message is displayed, click [Close] button.

11. Remove this CD from the CD-ROM drive. 

12. Next, setup HSSB driver according to [C. HSSB setting].


-------------------------------------------------------------------------------
 B. Method by the manual operation

 1. Click [Start] button.
        [Start] menu is displayed.

 2. Point [Computer], then right-click this. And click [Properties] from menu.
        [System] window is displayed.

 3. Click [Device Manager] on [Tasks] list.

 4. Because the [User Account Control] window is displayed, click [Continue]
    button.
        [Device Manager] window is diaplayed.

 5. Right-click the [PCI Simple Communications Controller] in [Other devices],
    then click [Properties] from popup menu.
        [PCI Simple Communications Controller Properties] window is displayed.

 6. Click [Driver] tab, then click [Update Driver...] button.
        [Update Driver Software - PCI Simple Communications Controller] window
        is displayed.

 7. Click [Browse my Computer for driver software].

 8. Set this CD onto the CD-ROM drive.

 9. Click [Browse] button of [Search for driver software in this location],
    then select "d:\hssb\vista" and click [Next] button.
    ("d:" is the drive letter for the CD-ROM.  If other drive letter is
    assigned to your drive, change it properly.)

10. [Windows can't verify the publisher of this driver software] message is
    displayed on [Windows Security] window.
        Click [Install this driver software anyway]

11. Driver software is automatically installed, then [Update Driver Software -
    FANUC HSSBxxxxx (xxxxx: the message is different by HSSB board type.)] 
    window is displayed.
        After [Windows has successfully updated your driver software] message is
        displayed, then click [Close] button.

12. Remove this CD from the CD-ROM drive. 

13. Next, setup HSSB driver according to [C. HSSB setting].


-------------------------------------------------------------------------------
 C. HSSB setting

 1. Click [Start] button, then click [Control Panel].

 2. Click [Hardware and Sound].
        [HSSB] icon is displayed, then click this.

 3. Because the [User Account Control] window is displayed, click [Allow].

 4. Select the node number that you want to attach the HSSB board and click
    [Setting...] button.

 5. Enter proper name which indicates the machine connected to the HSSB board
    (for example, "FS160 - No.1", "Milling Machine") to [Node name] within 19
    characters.

 6. Select CNC type from the [CNC Type] list box.

 7. Click [OK] button to close this window.

 8. In case of multiple HSSB connection, go back to step 4. and repeat these
    steps for each HSSB board.

 9. Click [Close] button.


 (Note) To change HSSB driver setting, you must have the Administrator
        privilege.


==========================================================================
[7] Installation (Upgrade to Windows 2000 from Windows 95/98/NT)
==========================================================================

    When Windows95/98 is upgraded to Windows 2000, an old HSSB driver 
    automatically becomes disabled.

    When you do the upgrade from windows NT to Windows 2000, delete the 
    old HSSB driver beforehand according to the following procedure, then
    do the upgrade to Windows 2000.

 1. Open [Device] in the Control Panel.

 2. Select "mmcncd" from list box, then click [Stop] button.

 3. Click [Startup] button and select [Disabled] in [Startup Type] group.

 4. Close the Control Panel.

 5. Set this CD onto the CD-ROM drive, then open \hssb\Nt40 folder at CD-ROM
    by explorer.

 6. Right-click the UNHSSB.INF file and click [install] on the pop up menu.
        The driver will be removed.

 7. Restart Windows 2000.


    Install the driver according to "[4] Installation (Windows 2000)" after
    doing the upgrade to Windows 2000.


==========================================================================
[8] Update method (Common)
==========================================================================

 1. Set this CD onto the CD-ROM drive, then execute the "d:\hssb\update.exe".
    ("d:" is the drive letter for the CD-ROM.  If other drive letter is
    assigned to your drive, change it properly.)
    The dialog box opens, and the following question is displayed.

      Update the HSSB Driver
      Are you sure?

 2. If you update the HSSB driver, select "Yes".

 3. When the HSSB driver was normally updated, the following message is
    displayed.