circulate_put_cut.c

自己编写的复合开关控制程序希望对大家有所帮助

#include "Main.H"
//#include "REG51.H"
unsigned char A[6]= {0,0,0,1,2,3};
unsigned char Put_Number,Cut_Number;
unsigned int i;
bit flag;
void Put(void)
   {
   	 if (A[0]!=0)
	    {
		 P1_1 =1;
		 P1_0 =0;/*欠容，指示灯亮*/
		 return;
		 }
	 else
	    {
		 if(P1_0==0) P1_0=1;
		 for(i=0;i<5;i++)
		    {
			 A[i]=A[i+1];
			 }
	     }
	  Put_Number=A[2];
	  flag=1; //码后向电容发出投入命令
	  A[i]=0;
    }
void Cut(void)
   {
   	if(A[2]==0)
	   {
	   	P1_0=1;
		P1_1=0;/*过容，指示灯亮*/
		return;
	    }
	else
	   {
	   	if(P1_1==0) P1_1=1;
		for(i=0;i<3;i++)
		   {
		   	if(A[i]!=0)
			   {
			   	A[i+3]=A[i];
				Cut_Number=A[i];
				flag=0;//码后向电容发出切除的命令
				A[i]=0;
				return;
			    }
		    }
	    }
   }