pcre_exec.c.svn-base

很好用的网络封装库,不熟悉网络编程的人也可以使用。使用风格良好的标准c++编写。

    continue;

    /* Negative assertion: all branches must fail to match */

    case OP_ASSERT_NOT:
    case OP_ASSERTBACK_NOT:
    do
      {
      RMATCH(rrc, eptr, ecode + 1 + LINK_SIZE, offset_top, md, ims, NULL, 0);
      if (rrc == MATCH_MATCH) RRETURN(MATCH_NOMATCH);
      if (rrc != MATCH_NOMATCH) RRETURN(rrc);
      ecode += GET(ecode,1);
      }
    while (*ecode == OP_ALT);

    if ((flags & match_condassert) != 0) RRETURN(MATCH_MATCH);

    ecode += 1 + LINK_SIZE;
    continue;

    /* Move the subject pointer back. This occurs only at the start of
    each branch of a lookbehind assertion. If we are too close to the start to
    move back, this match function fails. When working with UTF-8 we move
    back a number of characters, not bytes. */

    case OP_REVERSE:
#ifdef SUPPORT_UTF8
    if (utf8)
      {
      i = GET(ecode, 1);
      while (i-- > 0)
        {
        eptr--;
        if (eptr < md->start_subject) RRETURN(MATCH_NOMATCH);
        BACKCHAR(eptr)
        }
      }
    else
#endif

    /* No UTF-8 support, or not in UTF-8 mode: count is byte count */

      {
      eptr -= GET(ecode, 1);
      if (eptr < md->start_subject) RRETURN(MATCH_NOMATCH);
      }

    /* Skip to next op code */

    ecode += 1 + LINK_SIZE;
    break;

    /* The callout item calls an external function, if one is provided, passing
    details of the match so far. This is mainly for debugging, though the
    function is able to force a failure. */

    case OP_CALLOUT:
    if (pcre_callout != NULL)
      {
      pcre_callout_block cb;
      cb.version          = 1;   /* Version 1 of the callout block */
      cb.callout_number   = ecode[1];
      cb.offset_vector    = md->offset_vector;
      cb.subject          = (PCRE_SPTR)md->start_subject;
      cb.subject_length   = md->end_subject - md->start_subject;
      cb.start_match      = md->start_match - md->start_subject;
      cb.current_position = eptr - md->start_subject;
      cb.pattern_position = GET(ecode, 2);
      cb.next_item_length = GET(ecode, 2 + LINK_SIZE);
      cb.capture_top      = offset_top/2;
      cb.capture_last     = md->capture_last;
      cb.callout_data     = md->callout_data;
      if ((rrc = (*pcre_callout)(&cb)) > 0) RRETURN(MATCH_NOMATCH);
      if (rrc < 0) RRETURN(rrc);
      }
    ecode += 2 + 2*LINK_SIZE;
    break;

    /* Recursion either matches the current regex, or some subexpression. The
    offset data is the offset to the starting bracket from the start of the
    whole pattern. (This is so that it works from duplicated subpatterns.)

    If there are any capturing brackets started but not finished, we have to
    save their starting points and reinstate them after the recursion. However,
    we don't know how many such there are (offset_top records the completed
    total) so we just have to save all the potential data. There may be up to
    65535 such values, which is too large to put on the stack, but using malloc
    for small numbers seems expensive. As a compromise, the stack is used when
    there are no more than REC_STACK_SAVE_MAX values to store; otherwise malloc
    is used. A problem is what to do if the malloc fails ... there is no way of
    returning to the top level with an error. Save the top REC_STACK_SAVE_MAX
    values on the stack, and accept that the rest may be wrong.

    There are also other values that have to be saved. We use a chained
    sequence of blocks that actually live on the stack. Thanks to Robin Houston
    for the original version of this logic. */

    case OP_RECURSE:
      {
      callpat = md->start_code + GET(ecode, 1);
      new_recursive.group_num = (callpat == md->start_code)? 0 :
        GET2(callpat, 1 + LINK_SIZE);

      /* Add to "recursing stack" */

      new_recursive.prevrec = md->recursive;
      md->recursive = &new_recursive;

      /* Find where to continue from afterwards */

      ecode += 1 + LINK_SIZE;
      new_recursive.after_call = ecode;

      /* Now save the offset data. */

      new_recursive.saved_max = md->offset_end;
      if (new_recursive.saved_max <= REC_STACK_SAVE_MAX)
        new_recursive.offset_save = stacksave;
      else
        {
        new_recursive.offset_save =
          (int *)(pcre_malloc)(new_recursive.saved_max * sizeof(int));
        if (new_recursive.offset_save == NULL) RRETURN(PCRE_ERROR_NOMEMORY);
        }

      memcpy(new_recursive.offset_save, md->offset_vector,
            new_recursive.saved_max * sizeof(int));
      new_recursive.save_start = md->start_match;
      md->start_match = eptr;

      /* OK, now we can do the recursion. For each top-level alternative we
      restore the offset and recursion data. */

      DPRINTF(("Recursing into group %d\n", new_recursive.group_num));
      flags = (*callpat >= OP_SBRA)? match_cbegroup : 0;
      do
        {
        RMATCH(rrc, eptr, callpat + _pcre_OP_lengths[*callpat], offset_top,
          md, ims, eptrb, flags);
        if (rrc == MATCH_MATCH)
          {
          DPRINTF(("Recursion matched\n"));
          md->recursive = new_recursive.prevrec;
          if (new_recursive.offset_save != stacksave)
            (pcre_free)(new_recursive.offset_save);
          RRETURN(MATCH_MATCH);
          }
        else if (rrc != MATCH_NOMATCH)
          {
          DPRINTF(("Recursion gave error %d\n", rrc));
          RRETURN(rrc);
          }

        md->recursive = &new_recursive;
        memcpy(md->offset_vector, new_recursive.offset_save,
            new_recursive.saved_max * sizeof(int));
        callpat += GET(callpat, 1);
        }
      while (*callpat == OP_ALT);

      DPRINTF(("Recursion didn't match\n"));
      md->recursive = new_recursive.prevrec;
      if (new_recursive.offset_save != stacksave)
        (pcre_free)(new_recursive.offset_save);
      RRETURN(MATCH_NOMATCH);
      }
    /* Control never reaches here */

    /* "Once" brackets are like assertion brackets except that after a match,
    the point in the subject string is not moved back. Thus there can never be
    a move back into the brackets. Friedl calls these "atomic" subpatterns.
    Check the alternative branches in turn - the matching won't pass the KET
    for this kind of subpattern. If any one branch matches, we carry on as at
    the end of a normal bracket, leaving the subject pointer. */

    case OP_ONCE:
    prev = ecode;
    saved_eptr = eptr;

    do
      {
      RMATCH(rrc, eptr, ecode + 1 + LINK_SIZE, offset_top, md, ims,
        eptrb, 0);
      if (rrc == MATCH_MATCH) break;
      if (rrc != MATCH_NOMATCH) RRETURN(rrc);
      ecode += GET(ecode,1);
      }
    while (*ecode == OP_ALT);

    /* If hit the end of the group (which could be repeated), fail */

    if (*ecode != OP_ONCE && *ecode != OP_ALT) RRETURN(MATCH_NOMATCH);

    /* Continue as from after the assertion, updating the offsets high water
    mark, since extracts may have been taken. */

    do ecode += GET(ecode, 1); while (*ecode == OP_ALT);

    offset_top = md->end_offset_top;
    eptr = md->end_match_ptr;

    /* For a non-repeating ket, just continue at this level. This also
    happens for a repeating ket if no characters were matched in the group.
    This is the forcible breaking of infinite loops as implemented in Perl
    5.005. If there is an options reset, it will get obeyed in the normal
    course of events. */

    if (*ecode == OP_KET || eptr == saved_eptr)
      {
      ecode += 1+LINK_SIZE;
      break;
      }

    /* The repeating kets try the rest of the pattern or restart from the
    preceding bracket, in the appropriate order. The second "call" of match()
    uses tail recursion, to avoid using another stack frame. We need to reset
    any options that changed within the bracket before re-running it, so
    check the next opcode. */

    if (ecode[1+LINK_SIZE] == OP_OPT)
      {
      ims = (ims & ~PCRE_IMS) | ecode[4];
      DPRINTF(("ims set to %02lx at group repeat\n", ims));
      }

    if (*ecode == OP_KETRMIN)
      {
      RMATCH(rrc, eptr, ecode + 1 + LINK_SIZE, offset_top, md, ims, eptrb, 0);
      if (rrc != MATCH_NOMATCH) RRETURN(rrc);
      ecode = prev;
      flags = match_tail_recursed;
      goto TAIL_RECURSE;
      }
    else  /* OP_KETRMAX */
      {
      RMATCH(rrc, eptr, prev, offset_top, md, ims, eptrb, match_cbegroup);
      if (rrc != MATCH_NOMATCH) RRETURN(rrc);
      ecode += 1 + LINK_SIZE;
      flags = match_tail_recursed;
      goto TAIL_RECURSE;
      }
    /* Control never gets here */

    /* An alternation is the end of a branch; scan along to find the end of the
    bracketed group and go to there. */

    case OP_ALT:
    do ecode += GET(ecode,1); while (*ecode == OP_ALT);
    break;

    /* BRAZERO and BRAMINZERO occur just before a bracket group, indicating
    that it may occur zero times. It may repeat infinitely, or not at all -
    i.e. it could be ()* or ()? in the pattern. Brackets with fixed upper
    repeat limits are compiled as a number of copies, with the optional ones
    preceded by BRAZERO or BRAMINZERO. */

    case OP_BRAZERO:
      {
      next = ecode+1;
      RMATCH(rrc, eptr, next, offset_top, md, ims, eptrb, 0);
      if (rrc != MATCH_NOMATCH) RRETURN(rrc);
      do next += GET(next,1); while (*next == OP_ALT);
      ecode = next + 1 + LINK_SIZE;
      }
    break;

    case OP_BRAMINZERO:
      {
      next = ecode+1;
      do next += GET(next, 1); while (*next == OP_ALT);
      RMATCH(rrc, eptr, next + 1+LINK_SIZE, offset_top, md, ims, eptrb, 0);
      if (rrc != MATCH_NOMATCH) RRETURN(rrc);
      ecode++;
      }
    break;

    /* End of a group, repeated or non-repeating. */

    case OP_KET:
    case OP_KETRMIN:
    case OP_KETRMAX:
    prev = ecode - GET(ecode, 1);

    /* If this was a group that remembered the subject start, in order to break
    infinite repeats of empty string matches, retrieve the subject start from
    the chain. Otherwise, set it NULL. */

    if (*prev >= OP_SBRA)
      {
      saved_eptr = eptrb->epb_saved_eptr;   /* Value at start of group */
      eptrb = eptrb->epb_prev;              /* Backup to previous group */
      }
    else saved_eptr = NULL;

    /* If we are at the end of an assertion group, stop matching and return
    MATCH_MATCH, but record the current high water mark for use by positive
    assertions. Do this also for the "once" (atomic) groups. */

    if (*prev == OP_ASSERT || *prev == OP_ASSERT_NOT ||
        *prev == OP_ASSERTBACK || *prev == OP_ASSERTBACK_NOT ||
        *prev == OP_ONCE)
      {
      md->end_match_ptr = eptr;      /* For ONCE */
      md->end_offset_top = offset_top;
      RRETURN(MATCH_MATCH);
      }

    /* For capturing groups we have to check the group number back at the start
    and if necessary complete handling an extraction by setting the offsets and
    bumping the high water mark. Note that whole-pattern recursion is coded as
    a recurse into group 0, so it won't be picked up here. Instead, we catch it
    when the OP_END is reached. Other recursion is handled here. */

    if (*prev == OP_CBRA || *prev == OP_SCBRA)
      {
      number = GET2(prev, 1+LINK_SIZE);
      offset = number << 1;

#ifdef DEBUG
      printf("end bracket %d", number);
      printf("\n");
#endif

      md->capture_last = number;
      if (offset >= md->offset_max) md->offset_overflow = TRUE; else
        {
        md->offset_vector[offset] =
          md->offset_vector[md->offset_end - number];
        md->offset_vector[offset+1] = eptr - md->start_subject;
        if (offset_top <= offset) offset_top = offset + 2;
        }

      /* Handle a recursively called group. Restore the offsets
      appropriately and continue from after the call. */

      if (md->recursive != NULL && md->recursive->group_num == number)
        {
        recursion_info *rec = md->recursive;
        DPRINTF(("Recursion (%d) succeeded - continuing\n", number));
        md->recursive = rec->prevrec;
        md->start_match = rec->save_start;
        memcpy(md->offset_vector, rec->offset_save,
          rec->saved_max * sizeof(int));
        ecode = rec->after_call;
        ims = original_ims;
        break;
        }
      }

    /* For both capturing and non-capturing groups, reset the value of the ims
    flags, in case they got changed during the group. */

    ims = original_ims;
    DPRINTF(("ims reset to %02lx\n", ims));

    /* For a non-repeating ket, just continue at this level. This also
    happens for a repeating ket if no characters were matched in the group.
    This is the forcible breaking of infinite loops as implemented in Perl
    5.005. If there is an options reset, it will get obeyed in the normal
    course of events. */

    if (*ecode == OP_KET || eptr == saved_eptr)
      {
      ecode += 1 + LINK_SIZE;
      break;
      }

    /* The repeating kets try the rest of the pattern or restart from the
    preceding bracket, in the appropriate order. In the second case, we can use
    tail recursion to avoid using another stack frame. */

    flags = (*prev >= OP_SBRA)? match_cbegroup : 0;

    if (*ecode == OP_KETRMIN)
      {
      RMATCH(rrc, eptr, ecode + 1+LINK_SIZE, offset_top, md, ims, eptrb, 0);
      if (rrc != MATCH_NOMATCH) RRETURN(rrc);
      ecode = prev;
      flags |= match_tail_recursed;
      goto TAIL_RECURSE;
      }
    else  /* OP_KETRMAX */
      {
      RMATCH(rrc, eptr, prev, offset_top, md, ims, eptrb, flags);
      if (rrc != MATCH_NOMATCH) RRETURN(rrc);
      ecode += 1 + LINK_SIZE;
      flags = match_tail_recursed;
      goto TAIL_RECURSE;
      }
    /* Control never gets here */

    /* Start of subject unless notbol, or after internal newline if multiline */

    case OP_CIRC:
    if (md->notbol && eptr == md->start_subject) RRETURN(MATCH_NOMATCH);
    if ((ims & PCRE_MULTILINE) != 0)
      {
      if (eptr != md->start_subject &&
          (eptr == md->end_subject || !WAS_NEWLINE(eptr)))
        RRETURN(MATCH_NOMATCH);
      ecode++;
      break;
      }
    /* ... else fall through */

    /* Start of subject assertion */

    case OP_SOD:
    if (eptr != md->start_subject) RRETURN(MATCH_NOMATCH);
    ecode++;
    break;