aclocal.m4

基于SDL的framegrabber适用于简单的UI下的webcam应用开发

    fi
  done
  IFS="$ac_save_ifs"
  ;;
esac],
enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
])

# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install
AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_ENABLE_FAST_INSTALL(no)])

# AC_PROG_LD - find the path to the GNU or non-GNU linker
AC_DEFUN(AC_PROG_LD,
[AC_ARG_WITH(gnu-ld,
[  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]],
test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
ac_prog=ld
if test "$ac_cv_prog_gcc" = yes; then
  # Check if gcc -print-prog-name=ld gives a path.
  AC_MSG_CHECKING([for ld used by GCC])
  ac_prog=`($CC -print-prog-name=ld) 2>&5`
  case "$ac_prog" in
    # Accept absolute paths.
changequote(,)dnl
    [\\/]* | [A-Za-z]:[\\/]*)
      re_direlt='/[^/][^/]*/\.\./'
changequote([,])dnl
      # Canonicalize the path of ld
      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
      done
      test -z "$LD" && LD="$ac_prog"
      ;;
  "")
    # If it fails, then pretend we aren't using GCC.
    ac_prog=ld
    ;;
  *)
    # If it is relative, then search for the first ld in PATH.
    with_gnu_ld=unknown
    ;;
  esac
elif test "$with_gnu_ld" = yes; then
  AC_MSG_CHECKING([for GNU ld])
else
  AC_MSG_CHECKING([for non-GNU ld])
fi
AC_CACHE_VAL(ac_cv_path_LD,
[if test -z "$LD"; then
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
  for ac_dir in $PATH; do
    test -z "$ac_dir" && ac_dir=.
    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
      ac_cv_path_LD="$ac_dir/$ac_prog"
      # Check to see if the program is GNU ld.  I'd rather use --version,
      # but apparently some GNU ld's only accept -v.
      # Break only if it was the GNU/non-GNU ld that we prefer.
      if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
	test "$with_gnu_ld" != no && break
      else
	test "$with_gnu_ld" != yes && break
      fi
    fi
  done
  IFS="$ac_save_ifs"
else
  ac_cv_path_LD="$LD" # Let the user override the test with a path.
fi])
LD="$ac_cv_path_LD"
if test -n "$LD"; then
  AC_MSG_RESULT($LD)
else
  AC_MSG_RESULT(no)
fi
test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
AC_PROG_LD_GNU
])

AC_DEFUN(AC_PROG_LD_GNU,
[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld,
[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
  ac_cv_prog_gnu_ld=yes
else
  ac_cv_prog_gnu_ld=no
fi])
])

# AC_PROG_NM - find the path to a BSD-compatible name lister
AC_DEFUN(AC_PROG_NM,
[AC_MSG_CHECKING([for BSD-compatible nm])
AC_CACHE_VAL(ac_cv_path_NM,
[if test -n "$NM"; then
  # Let the user override the test.
  ac_cv_path_NM="$NM"
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
      # Check to see if the nm accepts a BSD-compat flag.
      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
      #   nm: unknown option "B" ignored
      if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
	ac_cv_path_NM="$ac_dir/nm -B"
	break
      elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
	ac_cv_path_NM="$ac_dir/nm -p"
	break
      else
	ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
	continue # so that we can try to find one that supports BSD flags
      fi
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
fi])
NM="$ac_cv_path_NM"
AC_MSG_RESULT([$NM])
])

# AC_CHECK_LIBM - check for math library
AC_DEFUN(AC_CHECK_LIBM,
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
LIBM=
case "$lt_target" in
*-*-beos* | *-*-cygwin*)
  # These system don't have libm
  ;;
*-ncr-sysv4.3*)
  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
  AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
  ;;
*)
  AC_CHECK_LIB(m, main, LIBM="-lm")
  ;;
esac
])

# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
# the libltdl convenience library and INCLTDL to the include flags for
# the libltdl header and adds --enable-ltdl-convenience to the
# configure arguments.  Note that LIBLTDL and INCLTDL are not
# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called.  If DIR is not
# provided, it is assumed to be `libltdl'.  LIBLTDL will be prefixed
# with '${top_builddir}/' and INCLTDL will be prefixed with
# '${top_srcdir}/' (note the single quotes!).  If your package is not
# flat and you're not using automake, define top_builddir and
# top_srcdir appropriately in the Makefiles.
AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
  case "$enable_ltdl_convenience" in
  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
  "") enable_ltdl_convenience=yes
      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
  esac
  LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
  INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
])

# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
# the libltdl installable library and INCLTDL to the include flags for
# the libltdl header and adds --enable-ltdl-install to the configure
# arguments.  Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is
# AC_CONFIG_SUBDIRS called.  If DIR is not provided and an installed
# libltdl is not found, it is assumed to be `libltdl'.  LIBLTDL will
# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed
# with '${top_srcdir}/' (note the single quotes!).  If your package is
# not flat and you're not using automake, define top_builddir and
# top_srcdir appropriately in the Makefiles.
# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
  AC_CHECK_LIB(ltdl, main,
  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
  [if test x"$enable_ltdl_install" = xno; then
     AC_MSG_WARN([libltdl not installed, but installation disabled])
   else
     enable_ltdl_install=yes
   fi
  ])
  if test x"$enable_ltdl_install" = x"yes"; then
    ac_configure_args="$ac_configure_args --enable-ltdl-install"
    LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
    INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
  else
    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
    LIBLTDL="-lltdl"
    INCLTDL=
  fi
])

dnl old names
AC_DEFUN(AM_PROG_LIBTOOL, [indir([AC_PROG_LIBTOOL])])dnl
AC_DEFUN(AM_ENABLE_SHARED, [indir([AC_ENABLE_SHARED], $@)])dnl
AC_DEFUN(AM_ENABLE_STATIC, [indir([AC_ENABLE_STATIC], $@)])dnl
AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl
AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl
AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl
AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl

dnl This is just to silence aclocal about the macro not being used
ifelse([AC_DISABLE_FAST_INSTALL])dnl

# lib-prefix.m4 serial 3 (gettext-0.13)
dnl Copyright (C) 2001-2003 Free Software Foundation, Inc.
dnl This file is free software, distributed under the terms of the GNU
dnl General Public License.  As a special exception to the GNU General
dnl Public License, this file may be distributed as part of a program
dnl that contains a configuration script generated by Autoconf, under
dnl the same distribution terms as the rest of that program.

dnl From Bruno Haible.

dnl AC_LIB_ARG_WITH is synonymous to AC_ARG_WITH in autoconf-2.13, and
dnl similar to AC_ARG_WITH in autoconf 2.52...2.57 except that is doesn't
dnl require excessive bracketing.
ifdef([AC_HELP_STRING],
[AC_DEFUN([AC_LIB_ARG_WITH], [AC_ARG_WITH([$1],[[$2]],[$3],[$4])])],
[AC_DEFUN([AC_][LIB_ARG_WITH], [AC_ARG_WITH([$1],[$2],[$3],[$4])])])

dnl AC_LIB_PREFIX adds to the CPPFLAGS and LDFLAGS the flags that are needed
dnl to access previously installed libraries. The basic assumption is that
dnl a user will want packages to use other packages he previously installed
dnl with the same --prefix option.
dnl This macro is not needed if only AC_LIB_LINKFLAGS is used to locate
dnl libraries, but is otherwise very convenient.
AC_DEFUN([AC_LIB_PREFIX],
[
  AC_BEFORE([$0], [AC_LIB_LINKFLAGS])
  AC_REQUIRE([AC_PROG_CC])
  AC_REQUIRE([AC_CANONICAL_HOST])
  AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
  dnl By default, look in $includedir and $libdir.
  use_additional=yes
  AC_LIB_WITH_FINAL_PREFIX([
    eval additional_includedir=\"$includedir\"
    eval additional_libdir=\"$libdir\"
  ])
  AC_LIB_ARG_WITH([lib-prefix],
[  --with-lib-prefix[=DIR] search for libraries in DIR/include and DIR/lib
  --without-lib-prefix    don't search for libraries in includedir and libdir],
[
    if test "X$withval" = "Xno"; then
      use_additional=no
    else
      if test "X$withval" = "X"; then
        AC_LIB_WITH_FINAL_PREFIX([
          eval additional_includedir=\"$includedir\"
          eval additional_libdir=\"$libdir\"
        ])
      else
        additional_includedir="$withval/include"
        additional_libdir="$withval/lib"
      fi
    fi
])
  if test $use_additional = yes; then
    dnl Potentially add $additional_includedir to $CPPFLAGS.
    dnl But don't add it
    dnl   1. if it's the standard /usr/include,
    dnl   2. if it's already present in $CPPFLAGS,
    dnl   3. if it's /usr/local/include and we are using GCC on Linux,
    dnl   4. if it doesn't exist as a directory.
    if test "X$additional_includedir" != "X/usr/include"; then
      haveit=
      for x in $CPPFLAGS; do
        AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
        if test "X$x" = "X-I$additional_includedir"; then
          haveit=yes
          break
        fi
      done
      if test -z "$haveit"; then
        if test "X$additional_includedir" = "X/usr/local/include"; then
          if test -n "$GCC"; then
            case $host_os in
              linux*) haveit=yes;;
            esac
          fi
        fi
        if test -z "$haveit"; then
          if test -d "$additional_includedir"; then
            dnl Really add $additional_includedir to $CPPFLAGS.
            CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }-I$additional_includedir"
          fi
        fi
      fi
    fi
    dnl Potentially add $additional_libdir to $LDFLAGS.
    dnl But don't add it
    dnl   1. if it's the standard /usr/lib,
    dnl   2. if it's already present in $LDFLAGS,
    dnl   3. if it's /usr/local/lib and we are using GCC on Linux,
    dnl   4. if it doesn't exist as a directory.
    if test "X$additional_libdir" != "X/usr/lib"; then
      haveit=
      for x in $LDFLAGS; do
        AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
        if test "X$x" = "X-L$additional_libdir"; then
          haveit=yes
          break
        fi
      done
      if test -z "$haveit"; then
        if test "X$additional_libdir" = "X/usr/local/lib"; then
          if test -n "$GCC"; then
            case $host_os in
              linux*) haveit=yes;;
            esac
          fi
        fi
        if test -z "$haveit"; then
          if test -d "$additional_libdir"; then
            dnl Really add $additional_libdir to $LDFLAGS.
            LDFLAGS="${LDFLAGS}${LDFLAGS:+ }-L$additional_libdir"
          fi
        fi
      fi
    fi
  fi
])

dnl AC_LIB_PREPARE_PREFIX creates variables acl_final_prefix,
dnl acl_final_exec_prefix, containing the values to which $prefix and
dnl $exec_prefix will expand at the end of the configure script.
AC_DEFUN([AC_LIB_PREPARE_PREFIX],
[
  dnl Unfortunately, prefix and exec_prefix get only finally determined
  dnl at the end of configure.
  if test "X$prefix" = "XNONE"; then
    acl_final_prefix="$ac_default_prefix"
  else
    acl_final_prefix="$prefix"
  fi
  if test "X$exec_prefix" = "XNONE"; then
    acl_final_exec_prefix='${prefix}'
  else
    acl_final_exec_prefix="$exec_prefix"
  fi
  acl_save_prefix="$prefix"
  prefix="$acl_final_prefix"
  eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
  prefix="$acl_save_prefix"
])

dnl AC_LIB_WITH_FINAL_PREFIX([statement]) evaluates statement, with the
dnl variables prefix and exec_prefix bound to the values they will have
dnl at the end of the configure script.
AC_DEFUN([AC_LIB_WITH_FINAL_PREFIX],
[
  acl_save_prefix="$prefix"
  prefix="$acl_final_prefix"
  acl_save_exec_prefix="$exec_prefix"
  exec_prefix="$acl_final_exec_prefix"
  $1
  exec_prefix="$acl_save_exec_prefix"
  prefix="$acl_save_prefix"
])

# lib-link.m4 serial 4 (gettext-0.12)
dnl Copyright (C) 2001-2003 Free Software Foundation, Inc.
dnl This file is free software, distributed under the terms of the GNU
dnl General Public License.  As a special exception to the GNU General
dnl Public License, this file may be distributed as part of a program
dnl that contains a configuration script generated by Autoconf, under
dnl the same distribution terms as the rest of that program.

dnl From Bruno Haible.

dnl AC_LIB_LINKFLAGS(name [, dependencies]) searches for libname and
dnl the libraries corresponding to explicit and implicit dependencies.
dnl Sets and AC_SUBSTs the LIB${NAME} and LTLIB${NAME} variables and
dnl augments the CPPFLAGS variable.
AC_DEFUN([AC_LIB_LINKFLAGS],
[
  AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
  AC_REQUIRE([AC_LIB_RPATH])
  define([Name],[translit([$1],[./-], [___])])
  define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
                               [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])