aci3_4.c

异步电机矢量控制c源程序

/* ==============================================================================
System Name:  ACI34_SIM (IQ version)

File Name:	ACI3_4.C

Description:	Primary system file for the Simulation of Sensorless Direct 
          		Field Orientation Control for a Three Phase AC Induction Motor. 

Originator:		Digital control systems Group - Texas Instruments

=====================================================================================
 History:
-------------------------------------------------------------------------------------
 04-15-2005	Version 3.20: Support both F280x and F281x targets 
 04-25-2005 Version 3.21: Move EINT and ERTM down to ensure that all initialization
 						  is completed before interrupts are allowed.
=================================================================================  */

// Include header files used in the main function
#include "target.h"

#if (DSP_TARGET==F2808)
#include "DSP280x_Device.h"
#endif
#if (DSP_TARGET==F2812)
#include "DSP281x_Device.h"
#endif

#include "IQmathLib.h"
#include "aci3_4.h"
#include "parameter.h"
#include "build.h"
#include <math.h>

// Prototype statements for functions found within this file.
interrupt void MainISR(void);

// Global variables used in this system
float32 VdTesting = 0.25;         // Vd testing (pu) 
float32 VqTesting = 0;            // Vq testing (pu) 
float32 IdRef = 0.4;              // Id reference (pu)
float32 IqRef = 0.05;             // Iq reference (pu)
float32 SpeedRef = 0.5;           // Speed reference (pu)
float32 T = SAMPLING_PERIOD;       // Samping period (sec), see parameter.h

Uint16 IsrTicker = 0;
Uint16 BackTicker = 0;

int16 PwmDacCh1 = 0;
int16 PwmDacCh2 = 0;
int16 PwmDacCh3 = 0;

int16 DlogCh1 = 0;
int16 DlogCh2 = 0;
int16 DlogCh3 = 0;
int16 DlogCh4 = 0;

volatile Uint16 EnableFlag = FALSE;

// Instance a induction model object
ACI aci1 = ACI_DEFAULTS;

// Instance rotor flux and speed estimations
ACIFE fe1 = ACIFE_DEFAULTS;
ACISE se1 = ACISE_DEFAULTS;

// Instance a few transform objects
PARK park1 = PARK_DEFAULTS;
IPARK ipark1 = IPARK_DEFAULTS;

// Instance PID regulators to regulate the d and q synchronous axis currents,
// and speed
PIDREG3 pid1_id = PIDREG3_DEFAULTS;
PIDREG3 pid1_iq = PIDREG3_DEFAULTS;
PIDREG3 pid1_spd = PIDREG3_DEFAULTS;

// Instance a ramp controller to smoothly ramp the frequency
RMPCNTL rc1 = RMPCNTL_DEFAULTS;

//	Instance a ramp generator to simulate an Anglele
RAMPGEN rg1 = RAMPGEN_DEFAULTS;

// Instance a PWM driver instance
PWMGEN pwm1 = PWMGEN_DEFAULTS;

// Instance a PWM DAC driver instance
PWMDAC pwmdac1 = PWMDAC_DEFAULTS;

// Instance a induction model constant object
ACI_CONST aci1_const = ACI_CONST_DEFAULTS;

// Instance the constant calculations for rotor flux and speed estimations
ACIFE_CONST fe1_const = ACIFE_CONST_DEFAULTS; 
ACISE_CONST se1_const = ACISE_CONST_DEFAULTS; 

// Create an instance of DATALOG Module
DLOG_4CH dlog = DLOG_4CH_DEFAULTS; 


void main(void)
{

// ******************************************
// Initialization code for DSP_TARGET = F2808
// ******************************************
#if (DSP_TARGET==F2808)

// Initialize System Control registers, PLL, WatchDog, Clocks to default state:
        // This function is found in the DSP280x_SysCtrl.c file.
	InitSysCtrl();

// Globally synchronize all ePWM modules to the time base clock (TBCLK)
    EALLOW;
    SysCtrlRegs.PCLKCR0.bit.TBCLKSYNC = 1;
    EDIS;
      
// HISPCP prescale register settings, normally it will be set to default values
    EALLOW;   // This is needed to write to EALLOW protected registers
    SysCtrlRegs.HISPCP.all = 0x0000;     // SYSCLKOUT/1 
    EDIS;   // This is needed to disable write to EALLOW protected registers 

// Disable and clear all CPU interrupts:
	DINT;
	IER = 0x0000;
	IFR = 0x0000;

// Initialize Pie Control Registers To Default State:
        // This function is found in the DSP280x_PieCtrl.c file.
	InitPieCtrl();

// Initialize the PIE Vector Table To a Known State:
        // This function is found in DSP280x_PieVect.c.
	// This function populates the PIE vector table with pointers
        // to the shell ISR functions found in DSP280x_DefaultIsr.c.
	InitPieVectTable();	

// User specific functions, Reassign vectors (optional), Enable Interrupts:

   // Waiting for enable flag set
   while (EnableFlag==FALSE) 
    { 
      BackTicker++;
    }

// Enable CNT_zero interrupt using EPWM1 Time-base
    EPwm1Regs.ETSEL.bit.INTEN = 1;   // Enable EPWM1INT generation 
    EPwm1Regs.ETSEL.bit.INTSEL = 1;  // Enable interrupt CNT_zero event
    EPwm1Regs.ETPS.bit.INTPRD = 1;   // Generate interrupt on the 1st event
    EPwm1Regs.ETCLR.bit.INT = 1;     // Enable more interrupts

// Reassign ISRs. 
        // Reassign the PIE vector for EPWM1_INT to point to a different 
        // ISR then the shell routine found in DSP280x_DefaultIsr.c.
        // This is done if the user does not want to use the shell ISR routine
        // but instead wants to use their own ISR.

	EALLOW;	// This is needed to write to EALLOW protected registers
	PieVectTable.EPWM1_INT = &MainISR;
	EDIS;   // This is needed to disable write to EALLOW protected registers

// Enable PIE group 3 interrupt 1 for EPWM1_INT
    PieCtrlRegs.PIEIER3.all = M_INT1;

// Enable CPU INT3 for EPWM1_INT:
	IER |= M_INT3;

#endif

// ******************************************
// Initialization code for DSP_TARGET = F2812
// ******************************************
#if (DSP_TARGET==F2812)

// Initialize System Control registers, PLL, WatchDog, Clocks to default state:
        // This function is found in the DSP281x_SysCtrl.c file.
	InitSysCtrl();

// HISPCP prescale register settings, normally it will be set to default values
    EALLOW;   // This is needed to write to EALLOW protected registers
    SysCtrlRegs.HISPCP.all = 0x0000;     // SYSCLKOUT/1 
    EDIS;   // This is needed to disable write to EALLOW protected registers 

// Disable and clear all CPU interrupts:
	DINT;
	IER = 0x0000;
	IFR = 0x0000;

// Initialize Pie Control Registers To Default State:
        // This function is found in the DSP281x_PieCtrl.c file.
	InitPieCtrl();

// Initialize the PIE Vector Table To a Known State:
        // This function is found in DSP281x_PieVect.c.
	// This function populates the PIE vector table with pointers
        // to the shell ISR functions found in DSP281x_DefaultIsr.c.
	InitPieVectTable();	
	
// User specific functions, Reassign vectors (optional), Enable Interrupts:

// Initialize EVA Timer 1:
    // Setup Timer 1 Registers (EV A)
    EvaRegs.GPTCONA.all = 0;

   // Waiting for enable flag set
   while (EnableFlag==FALSE) 
    { 
      BackTicker++;
    }
    
// Enable Underflow interrupt bits for GP timer 1
    EvaRegs.EVAIMRA.bit.T1UFINT = 1;
    EvaRegs.EVAIFRA.bit.T1UFINT = 1;

// Reassign ISRs. 
        // Reassign the PIE vector for T1UFINT to point to a different 
        // ISR then the shell routine found in DSP281x_DefaultIsr.c.
        // This is done if the user does not want to use the shell ISR routine
        // but instead wants to use their own ISR.

	EALLOW;	// This is needed to write to EALLOW protected registers
	PieVectTable.T1UFINT = &MainISR;
	EDIS;   // This is needed to disable write to EALLOW protected registers

// Enable PIE group 2 interrupt 6 for T1UFINT
    PieCtrlRegs.PIEIER2.all = M_INT6;

// Enable CPU INT2 for T1UFINT:
	IER |= M_INT2;

#endif

   // Initialize PWM module
    #if (DSP_TARGET==F2808)
       pwm1.PeriodMax = 0x8236;     // ISR frequency = 1.5 kHz with 100MHz clock (0x8236 = 33334)
 	#endif
    #if (DSP_TARGET==F2812)
       pwm1.PeriodMax = 0xC350;     // ISR frequency = 1.5 kHz with 150MHz clock (0xC350 = 50000)
 	#endif 	
 	pwm1.init(&pwm1); 

    // Initialize PWMDAC module 
    pwmdac1.PeriodMax = (SYSTEM_FREQUENCY*200/(30*2))*5;   // PWMDAC Frequency = 30 kHz
    pwmdac1.PwmDacInPointer0 = &PwmDacCh1;
    pwmdac1.PwmDacInPointer1 = &PwmDacCh2;
    pwmdac1.PwmDacInPointer2 = &PwmDacCh3;
	pwmdac1.init(&pwmdac1); 

// Initialize DATALOG module      
    dlog.iptr1 = &DlogCh1;
    dlog.iptr2 = &DlogCh2;
    dlog.iptr3 = &DlogCh3;
    dlog.iptr4 = &DlogCh4;
    dlog.trig_value = 0x0;
    dlog.size = 0x400;
    dlog.prescalar = 1;
    dlog.init(&dlog);

// Initialize RAMPGEN module
    rg1.StepAngleMax = _IQ(BASE_FREQ*T);

// Initialize RAMP_CNTL module
    rc1.RampDelayMax = 1;

// Initialize the ACI constant module
	aci1_const.Rs = RS;
	aci1_const.Rr = RR;
	aci1_const.Ls = LS;
	aci1_const.Lr = LR;
	aci1_const.Lm = LM;
	aci1_const.p = P;
	aci1_const.B = BB;
	aci1_const.J = JJ;
	aci1_const.Ib = BASE_CURRENT;
	aci1_const.Vb = BASE_VOLTAGE;
	aci1_const.Wb = 2*PI*BASE_FREQ;
	aci1_const.Tb = BASE_TORQUE;
	aci1_const.Lb = BASE_FLUX;
	aci1_const.Ts = T;
 	aci1_const.calc(&aci1_const);

// Initialize the ACI module
 	aci1.K1 = _IQ(aci1_const.K1);
 	aci1.K2 = _IQ(aci1_const.K2);
 	aci1.K3 = _IQ(aci1_const.K3);
 	aci1.K4 = _IQ(aci1_const.K4);
  	aci1.K5 = _IQ(aci1_const.K5);
 	aci1.K6 = _IQ(aci1_const.K6);
  	aci1.K7 = _IQ(aci1_const.K7);