📄 randomize_extend.html

📁 an analysis software with souce code for the time series with methods based on the theory of nonline
💻 HTML
字号:
<html> 
<head><title>Custom constraints</title></head>
<body bgcolor="#ffffff">
<h3>Custom constraints</h3>

This page describes how to extend the set of modules that implement
constraints, cooling schemes, and permutation schemes for annealed surrogates.
I have tried to keep everything as modular as possible with FORTRAN. Therefore,
it seems extremely unlikely that, when you supply a new module for any one of
the three tasks, you might want to change any of the others, or even the main
module, <font color=blue><tt>randomize.f</tt></font>.  Experts in simulated
annealing are likely to know better cooling and permutation schemes than those
available in this package. Experts, however, are likely to figure out how to
provide these and I will therefore concentrate on the implementation of other
cost functions.
<p>
If you want to supply any changed or new modules, here is the recommended 
sequence of actions. 
<ul>
<li>Choose a new name for the module and place the source in the appropriate 
    directory (<font color=blue><tt>cost</tt></font>,
    <font color=blue><tt>cool</tt>, or 
    </font><font color=blue><tt>perm</tt></font>)
<li>Add a line for the target <font color=blue><tt>all:</tt></font> 
    to the <font color=blue><tt>Makefile</tt></font> in the
    directory <font color=blue><tt>randomize</tt></font>
<li>Create the new executable by running <font color=blue><tt>make</tt></font>
</ul>
For example, you could start from <font
color=blue><tt>cost/auto.f</tt></font> by adding or deleting constraints and
then name the source <font color=blue><tt>cost/mycost.f</tt></font> Then add
the line 
<blockquote><font color=blue><tt>$(TEMPLATE) COST=mycost COOL=exp PERM=rand
$(XFLAGS)</tt></font> 
</blockquote>
to <font color=blue><tt>Makefile</tt></font> and run
<font color=blue><tt>make</tt></font>.
<p>
<hr>
<p>

<h4>Cost function entry points</h4>
In order for the modularity to work, the subroutine calls must be kept
identical through all constraint/cost function modules. This means that any
additional information has to be exchanged and stored by means of common
blocks. The blank common block
<br><font color=blue><tt>common nmax,cost,temp,cmin,rate,x</tt></font>
<br>contains some useful items which are likely to be needed by the
modules. These are the number <tt>nmax</tt> of data points, the current cost
<tt>cost</tt>, the current temperature <tt>temp</tt>, the minimal cost
<tt>cmin</tt>, the current rate of acceptance <tt>rate</tt> and the data set
as a real array <tt>x</tt>. Note that  <tt>x</tt> needs to be of fixed length
syntactically, but since it is the last item of the common block, this is not
essential as long as it is declared large enough to store <tt>nmax</tt> items.
<p>
The following entry points must be provided:
<p>
<font color=blue><tt>subroutine opts_cost(ncol)</tt></font>
<blockquote>
Scans the command line for options specific to the cost function. Set <font
color=blue><tt>ncol</tt></font> to the number of columns needed from the input
file. On input, it is set to what is deduced from the
<font color=blue><tt> -c </tt></font> and <font color=blue><tt> -m </tt></font>
options.

<p><font color=red><b>Example: </b></font> 
   in <font color=blue><tt>cost/auto.f</tt></font> the number of desired lags
   is determined from the command line option 
   <font color=blue><tt> -D </tt></font> and stored as an item in a common
   block to be available for the actual cost function. Similarly the option
   <font color=blue><tt> -W </tt></font> is scanned for the desired weighting.
</blockquote>

<p>
<font color=blue><tt>subroutine what_cost()</tt></font>
<blockquote>
Just prints a line saying which cost function is implemented.
</blockquote>

<p>
<font color=blue><tt>subroutine usage_cost()</tt></font>
<blockquote>
Prints that part of the usage message specific to the cost function, in
particular maybe explaining the command line options.
</blockquote>

<p>
<font color=blue><tt>subroutine cost_init()</tt></font>
<blockquote>
Does all necessary initializations of the cost function. In particular, the
goal value of some quantities, typically derived from the original time series,
can be set. 
<p><font color=red><b>Example: </b></font> 
   in <font color=blue><tt>cost/auto.f</tt></font> the number of lags is
   truncated to fit into the available space. Then the autocorrelation function
   of the data (<tt>x</tt> in the blank common block) is computed and stored as
   an array <tt>c0</tt> in the common block <tt>/costcom/</tt> for later use.
</blockquote>
<p>

<p>
<font color=blue><tt>subroutine cost_transform(nmax,mcmax,nxdum,x)</tt></font>
<blockquote>
Does any initial transformation on the data. The data length <font
color=blue><tt>nmax</tt></font>, the number of columns <font
color=blue><tt>mcmax</tt></font>, and the first dimension <font
color=blue><tt>nxdum</tt></font> is provided in case that is needed.  Finally,
<font color=blue><tt>x</tt></font> is the data.

<p><font color=red><b>Example: </b></font> 
   in <font color=blue><tt>cost/auto.f</tt></font> the data is normalized to
   zero mean and unit variance, mean and variance are stored.
</blockquote>

<p>
<font color=blue><tt>subroutine cost_inverse(nmax,mcmax,nxdum,x,y)</tt></font>
<blockquote>
Inverts any initial transformation on the data. The data length <font
color=blue><tt>nmax</tt></font>, the number of columns <font
color=blue><tt>mcmax</tt></font>, and the first dimension <font
color=blue><tt>nxdum</tt></font> is provided in case that is needed.  Finally,
<font color=blue><tt>x</tt></font> is the data and <font
color=blue><tt>y</tt></font> a back transformed copy.

<p><font color=red><b>Example: </b></font> 
   in <font color=blue><tt>cost/auto.f</tt></font> the data is restored to its
   original mean and variance.
</blockquote>

<p>
<font color=blue><tt>subroutine cost_full(iv)</tt></font>
<blockquote>
Determines the value of the cost function given a configuration <tt>x</tt>.
A nonzero value <tt>iv</tt> indicates that diagnostic output is desired.
<p><font color=red><b>Example: </b></font> 
   in <font color=blue><tt>cost/auto.f</tt></font> the autocorrelation function
   of the data is computed and averaged to yield the total cost, which is
   returned by the function.
</blockquote>

<p>
<font color=blue><tt>subroutine cost_update(n1,n2,cmax,iaccept,iv)</tt></font>
<blockquote>
Determines the value of the cost function when the data items <tt>n1</tt> and
<tt>n2</tt> are exchanged. If the resulting cost is less than <tt>cmax</tt>,
the change is accepted. In that case, <tt>iaccept</tt> is set to one. The new
cost is stored in the blank common blok. On nonacceptance, its value is left
unchanged. A nonzero value <tt>iv</tt> indicates that diagnostic output is
desired.  
<p><font color=red><b>Example: </b></font> 
   it is important to note that while the complete cost function requires 
   O(<tt>nlag*nmax</tt>) computations, the interchange of two items can be
   monitored by O(<tt>nlag</tt>) computations. This is taken care of in
   <font color=blue><tt>cost/auto.f</tt></font>. Be absolutely sure that the
   update is done correctly for all possible cases! A mismatch between assumed
   cost and actual cost can lead to a desaster. Because of possible roundoff
   problems, the full computation is called for regularly by the cooling
   scheme. 
</blockquote>
<p>
    <a href="randomize.html" tppabs="http://www.mpipks-dresden.mpg.de/~tisean/TISEAN_2.0/docs/wuppertal/randomize.html"><em>constrained randomization</em></a> *
<a href="../contents.html" tppabs="http://www.mpipks-dresden.mpg.de/~tisean/TISEAN_2.0/docs/contents.html">Table of Contents</a> * <a href="../../index.html" tppabs="http://www.mpipks-dresden.mpg.de/~tisean/TISEAN_2.0/index.html" target="_top">TISEAN home</a>
</body></html>
⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -