english.ini

FREEship_version_2.6_win32_executable 船舶避碰方面的开源软件

TFreeMichletOutputDialog.GroupBox1.Caption=Sectorial cut.
TFreeMichletOutputDialog.GroupBox2.Caption=Rectangular cut.
TFreeMichletOutputDialog.SaveFile.Caption=Save

[TFreeMirrorPlaneDialog]
TFreeMirrorPlaneDialog.Caption=Mirror
TFreeMirrorPlaneDialog.GroupBox1.Caption=3D Mirror plane.
TFreeMirrorPlaneDialog.Label1.Caption=Distance
TFreeMirrorPlaneDialog.RadioButton1.Caption=Transverse plane
TFreeMirrorPlaneDialog.RadioButton2.Caption=Horizontal plane
TFreeMirrorPlaneDialog.RadioButton3.Caption=Vertical plane
TFreeMirrorPlaneDialog.CheckBox1.Caption=Connect to existing points
TFreeMirrorPlaneDialog.BitBtn1.Caption=OK
TFreeMirrorPlaneDialog.BitBtn2.Caption=Cancel

[TFreeNewModelDialog]
TFreeNewModelDialog.Caption=New model.
TFreeNewModelDialog.BitBtn1.Caption=OK
TFreeNewModelDialog.BitBtn2.Caption=Cancel
TFreeNewModelDialog.Label1.Caption=No. points in longitudinal direction
TFreeNewModelDialog.Label2.Caption=No. points in vertical direction
TFreeNewModelDialog.Label3.Caption=Length
TFreeNewModelDialog.Label4.Caption=Beam
TFreeNewModelDialog.Label5.Caption=Draft
TFreeNewModelDialog.Label6.Caption=Units
TFreeNewModelDialog.ComboBox1.Items[0]=Meters
TFreeNewModelDialog.ComboBox1.Items[1]=Feet

[TFreePreferencesDialog]
TFreePreferencesDialog.Caption=Preferences.
TFreePreferencesDialog.SpeedButton1.Caption=OK
TFreePreferencesDialog.SpeedButton2.Caption=Cancel
TFreePreferencesDialog.Label1.Caption=Viewport background
TFreePreferencesDialog.Label2.Caption=New surfaces
TFreePreferencesDialog.Label3.Caption=Submerged surfaces
TFreePreferencesDialog.Label4.Caption=Regular control edges
TFreePreferencesDialog.Label5.Caption=Crease edges (control)
TFreePreferencesDialog.Label6.Caption=Crease edges (interior)
TFreePreferencesDialog.Label7.Caption=Regular control points
TFreePreferencesDialog.Label8.Caption=Crease points
TFreePreferencesDialog.Label9.Caption=Corner points
TFreePreferencesDialog.Label10.Caption=Dart points
TFreePreferencesDialog.Label11.Caption=Selected items
TFreePreferencesDialog.Label12.Caption=Viewport grid
TFreePreferencesDialog.Label13.Caption=Grid font
TFreePreferencesDialog.Label14.Caption=Stations
TFreePreferencesDialog.Label15.Caption=Buttocks
TFreePreferencesDialog.Label16.Caption=Waterlines
TFreePreferencesDialog.Label17.Caption=Controlpoint size
TFreePreferencesDialog.Label18.Caption=Surface normals
TFreePreferencesDialog.Label19.Caption=Diagonals
TFreePreferencesDialog.Label20.Caption=Leak points
TFreePreferencesDialog.Label21.Caption=Markers
TFreePreferencesDialog.Label22.Caption=Curvature plots
TFreePreferencesDialog.Label23.Caption=Control curves
TFreePreferencesDialog.Label24.Caption=Hydrostatics font color
TFreePreferencesDialog.Label25.Caption=Zebra stripes color
TFreePreferencesDialog.Label26.Caption=Language
TFreePreferencesDialog.Label27.Caption=Max. undo memory (Mb)
TFreePreferencesDialog.BitBtn2.Caption=Cancel
TFreePreferencesDialog.BitBtn1.Caption=OK
TFreePreferencesDialog.SpeedButton3.Caption=Reset

[TFREEProjectSettingsDialog]
TFREEProjectSettingsDialog.Caption=Project settings.
TFREEProjectSettingsDialog.TabSheet1.Caption=General
TFREEProjectSettingsDialog.Label1.Caption=Project name
TFREEProjectSettingsDialog.Label7.Caption=Designer
TFREEProjectSettingsDialog.Label8.Caption=Units
TFREEProjectSettingsDialog.Label15.Caption=Comment
TFREEProjectSettingsDialog.Label16.Caption=File created by
TFREEProjectSettingsDialog.CheckBox1.Caption=Shade underwater
TFREEProjectSettingsDialog.Unitbox.Items[0]=Metric
TFREEProjectSettingsDialog.Unitbox.Items[1]=Imperial
TFREEProjectSettingsDialog.CheckBox4.Caption=Save preview image
TFREEProjectSettingsDialog.CheckBox10.Caption=Simplify intersections
TFREEProjectSettingsDialog.TabSheet3.Caption=Main dimensions
TFREEProjectSettingsDialog.Label2.Caption=Length
TFREEProjectSettingsDialog.Label3.Caption=Beam
TFREEProjectSettingsDialog.Label4.Caption=Draft
TFREEProjectSettingsDialog.Label13.Caption=Midship location
TFREEProjectSettingsDialog.CheckBox2.Caption=Default at 0.5*L
TFREEProjectSettingsDialog.TabSheet2.Caption=Hydrostatics
TFREEProjectSettingsDialog.Label5.Caption=Water density
TFREEProjectSettingsDialog.Label6.Caption=Appendage coefficient
TFREEProjectSettingsDialog.Label17.Caption=Coefficients based on
TFREEProjectSettingsDialog.GroupBox1.Caption=Display hydrostatic features.
TFREEProjectSettingsDialog.Label18.Caption=Select which of the following hydrostatic properties
TFREEProjectSettingsDialog.Label19.Caption=you want to have displayed in the model:
TFREEProjectSettingsDialog.CheckBox5.Caption=Displacement and center of buoyancy
TFREEProjectSettingsDialog.CheckBox6.Caption=Curve of sectional areas
TFREEProjectSettingsDialog.CheckBox7.Caption=Metacentric height
TFREEProjectSettingsDialog.CheckBox8.Caption=Longitudinal center of floatation
TFREEProjectSettingsDialog.CheckBox9.Caption=Lateral area and center of effort
TFREEProjectSettingsDialog.ComboBox1.Items[0]=Dimensions from project settings
TFREEProjectSettingsDialog.ComboBox1.Items[1]=Actual dimensions of submerged body
TFREEProjectSettingsDialog.CheckBox3.Caption=Disable surface check
TFREEProjectSettingsDialog.BitBtn1.Caption=OK
TFREEProjectSettingsDialog.BitBtn2.Caption=Cancel

[TFreeResistance_Delft]
TFreeResistance_Delft.Caption=Resistance for Sailing Yachts
TFreeResistance_Delft.General.Caption=General
TFreeResistance_Delft.GroupBox1.Caption=General
TFreeResistance_Delft.Label1.Caption=Start speed
TFreeResistance_Delft.Label2.Caption=End speed
TFreeResistance_Delft.Label3.Caption=Step
TFreeResistance_Delft.Label4.Caption=Water density
TFreeResistance_Delft.Label5.Caption=Viscosity
TFreeResistance_Delft.GroupBox2.Caption=Hull
TFreeResistance_Delft.Label13.Caption=Wetted surface
TFreeResistance_Delft.Label20.Caption=Total draft
TFreeResistance_Delft.Label21.Caption=Draft hull
TFreeResistance_Delft.Label22.Caption=Beam waterline
TFreeResistance_Delft.Label23.Caption=Length waterline
TFreeResistance_Delft.Label24.Caption=Prismatic coefficient
TFreeResistance_Delft.Label25.Caption=LCB
TFreeResistance_Delft.Label26.Caption=Displacement
TFreeResistance_Delft.Label27.Caption=Waterplane area
TFreeResistance_Delft.EstimateBox.Caption=Use estimate
TFreeResistance_Delft.CheckBox2.Caption=Extract data from current hull
TFreeResistance_Delft.GroupBox3.Caption=Keel
TFreeResistance_Delft.Label28.Caption=Wetted area
TFreeResistance_Delft.Label29.Caption=Average chordlength
TFreeResistance_Delft.GroupBox4.Caption=Rudder
TFreeResistance_Delft.Label6.Caption=Average chordlength
TFreeResistance_Delft.Label7.Caption=Wetted area
TFreeResistance_Delft.Results.Caption=Results
TFreeResistance_Delft.ToolButton20.Hint=Start the calculation.
TFreeResistance_Delft.PrintButton.Hint=Print the results of the calculation.
TFreeResistance_Delft.ToolButton25.Hint=Close the window and save changes.
TFreeResistance_Delft.ToolButton7.Hint=Close window without saving changes.

[TFreeResistance_Kaper]
TFreeResistance_Kaper.Caption=Kaper resistance calculation.
TFreeResistance_Kaper.PrintButton.Hint=Print the results of the calculation.
TFreeResistance_Kaper.ToolButton25.Hint=Close the window and save changes.
TFreeResistance_Kaper.ToolButton7.Hint=Close window without saving changes.
TFreeResistance_Kaper.TabSheet1.Caption=General
TFreeResistance_Kaper.Label2.Caption=Length waterline
TFreeResistance_Kaper.Label3.Caption=Beam waterline
TFreeResistance_Kaper.Label4.Caption=Draft
TFreeResistance_Kaper.Label6.Caption=Wetted surface area
TFreeResistance_Kaper.Label8.Caption=Cp
TFreeResistance_Kaper.Label13.Caption=Displacement
TFreeResistance_Kaper.Label15.Caption=Half entrance angle
TFreeResistance_Kaper.Label17.Caption=LCB
TFreeResistance_Kaper.Label19.Caption=Subm. transom ratio
TFreeResistance_Kaper.CheckBox2.Caption=Extract data from current hull
TFreeResistance_Kaper.TabSheet2.Caption=Results

[TFreeRotateDialog]
TFreeRotateDialog.Caption=Rotation
TFreeRotateDialog.Label1.Caption=Longitudinal axis
TFreeRotateDialog.Label2.Caption=Transverse axis
TFreeRotateDialog.Label4.Caption=Vertical axis
TFreeRotateDialog.OKButton.Caption=Ok
TFreeRotateDialog.OKButton.Hint=Close dialog.
TFreeRotateDialog.CancelButton.Caption=Cancel
TFreeRotateDialog.CancelButton.Hint=Cancel operation.

[TFreeSelectLayersDialog]
TFreeSelectLayersDialog.Caption=Select layers.
TFreeSelectLayersDialog.CheckBox.Caption=Include points that are shared with unselected layers
TFreeSelectLayersDialog.BitBtn1.Caption=OK
TFreeSelectLayersDialog.BitBtn2.Caption=Cancel

[TFreeUndoHistoryDialog]
TFreeUndoHistoryDialog.Caption=Undo history.
TFreeUndoHistoryDialog.SpeedButton1.Caption=Select
TFreeUndoHistoryDialog.SpeedButton2.Caption=Cancel

[TSaveImageDialog]
TSaveImageDialog.Caption=Save image.
TSaveImageDialog.Label3.Caption=[pixels]
TSaveImageDialog.Label6.Caption=[pixels]
TSaveImageDialog.Label1.Caption=Width
TSaveImageDialog.Label2.Caption=Height
TSaveImageDialog.Label4.Caption=Estimated size
TSaveImageDialog.Label7.Caption=Filename
TSaveImageDialog.BitBtn1.Caption=OK
TSaveImageDialog.BitBtn2.Caption=Cancel

[TFreeBackgroundBlendDialog]
TFreeBackgroundBlendDialog.Caption=Background blending.
TFreeBackgroundBlendDialog.Label1.Caption=Visibility of image
TFreeBackgroundBlendDialog.BitBtn1.Caption=OK
TFreeBackgroundBlendDialog.BitBtn2.Caption=Cancel

[TFreeCylinderDialog]
TFreeCylinderDialog.Caption=Add a cylinder.
TFreeCylinderDialog.Label1.Caption=Startpoint
TFreeCylinderDialog.Label2.Caption=Endpoint
TFreeCylinderDialog.Label4.Caption=Radius
TFreeCylinderDialog.Label3.Caption=No. points
TFreeCylinderDialog.BitBtn1.Caption=OK
TFreeCylinderDialog.BitBtn2.Caption=Cancel

[TDXFExport2DDialog]
TDXFExport2DDialog.Caption=Export intersections to DXF as 2D polylines.
TDXFExport2DDialog.Label3.Caption=[pixels]
TDXFExport2DDialog.Label1.Caption=Max length of line segments
TDXFExport2DDialog.Label7.Caption=Export directory
TDXFExport2DDialog.SpeedButton1.Hint=Browse for the export directory
TDXFExport2DDialog.Label4.Caption=Export units
TDXFExport2DDialog.ComboBox1.Items[0]=Meters
TDXFExport2DDialog.ComboBox1.Items[1]=Centimeters
TDXFExport2DDialog.ComboBox1.Items[2]=Millimeters
TDXFExport2DDialog.ComboBox1.Items[3]=Feet
TDXFExport2DDialog.ComboBox1.Items[4]=Inch
TDXFExport2DDialog.CheckBox1.Caption=Create individual files
TDXFExport2DDialog.BitBtn1.Caption=OK
TDXFExport2DDialog.BitBtn2.Caption=Cancel

[TFreeLinesplanForm]
TFreeLinesplanForm.Caption=Linesplan.

[User]
User0275=according to John Winters
User0131=Add cylinder
User0130=Add flowline
User0227=Add multiple buttocks
User0233=Add multiple diagonals
User0224=Add multiple stations
User0230=Add multiple waterlines
User0226=Add one buttock
User0232=Add one diagonal
User0223=Add one station
User0229=Add one waterline
User0171=align points
User0172=All of the selected points are locked and cannot be moved
User0148=analyze surface
User0206=and
User0188=and cannot be opened with this version
User0051=Appendage coefficient
User0087=Are you sure you want to continue?
User0143=Are you sure you want to delete all the markers?
User0173=Are you sure you want to delete the
User0068=Are you sure you want to delete this background image?
User0282=Are you sure you want to quit
User0247=Are you sure you want to reset the preferences
User0034=Area
User0166=At least two layers are needed to perform this operation.
User0260=Average chordlength
User0219=Background image settings
User0184=Base
User0018=Beam on waterline
User0047=Beam over all
User0007=Block coefficient
User0215=Bodyplan view
User0059=Buttock
User0063=Buttocks
User0268=Bwl/Tc is outside valid domain
User0263=Calculated variables
User0294=Calculation aborted
User0245=Center
User0183=Centerline
User0209=Choose a directory where you want to save the dxf files to: