cim_powersupply.mof

Pegasus is an open-source implementationof the DMTF CIM and WBEM standards. It is designed to be por

// Copyright (c) 2005 DMTF.  All rights reserved.
// <change cr="CIMCoreCR00735.001" type ="change">Update of
// descriptions based on Tech Edit review.</
// <change cr="ArchCR00066.004" type="add">Add UmlPackagePath
// qualifier values to CIM Schema.</change>
// ==================================================================
//  CIM_PowerSupply
// ==================================================================
   [UMLPackagePath ( "CIM::Device::CoolingAndPower" ),
       Version ( "2.10.0" ), Description (
       "Capabilities and management of the PowerSupply LogicalDevice.")]
class CIM_PowerSupply : CIM_LogicalDevice {

      [Description (
          "Boolean indicating that the PowerSupply is a switching "
          "(instead of linear) supply.")]
   boolean IsSwitchingSupply;

      [Description (
          "The low voltage of Input Voltage Range 1 for this Power "
          "Supply, in millivolts. A value of 0 denotes 'unknown'."), 
       Units ( "MilliVolts" ), 
       MappingStrings { "MIF.DMTF|Power Supply|004.7" }]
   uint32 Range1InputVoltageLow;

      [Description (
          "The high voltage of Input Voltage Range 1 for this Power "
          "Supply, in millivolts. A value of 0 denotes 'unknown'."), 
       Units ( "MilliVolts" ), 
       MappingStrings { "MIF.DMTF|Power Supply|004.8" }]
   uint32 Range1InputVoltageHigh;

      [Description (
          "The frequency (in hertz) at the low end of the Input "
          "Frequency Range 1 of this Power Supply. A value of 0 "
          "implies DC."), 
       Units ( "Hertz" ), 
       MappingStrings { "MIF.DMTF|Power Supply|004.17" }]
   uint32 Range1InputFrequencyLow;

      [Description (
          "The frequency (in hertz) at the high end of the Input "
          "Frequency Range 1 of this Power Supply. A value of 0 "
          "implies DC."), 
       Units ( "Hertz" ), 
       MappingStrings { "MIF.DMTF|Power Supply|004.18" }]
   uint32 Range1InputFrequencyHigh;

      [Description (
          "The low voltage of Input Voltage Range 2 for this Power "
          "Supply, in millivolts. A value of 0 denotes 'unknown'."), 
       Units ( "MilliVolts" ), 
       MappingStrings { "MIF.DMTF|Power Supply|004.11" }]
   uint32 Range2InputVoltageLow;

      [Description (
          "The high voltage of Input Voltage Range 2 for this Power "
          "Supply, in millivolts. A value of 0 denotes 'unknown'."), 
       Units ( "MilliVolts" ), 
       MappingStrings { "MIF.DMTF|Power Supply|004.12" }]
   uint32 Range2InputVoltageHigh;

      [Description (
          "The frequency (in hertz) at the low end of the Input "
          "Frequency Range 2 of this Power Supply. A value of 0 "
          "implies DC."), 
       Units ( "Hertz" ), 
       MappingStrings { "MIF.DMTF|Power Supply|004.19" }]
   uint32 Range2InputFrequencyLow;

      [Description (
          "The frequency (in hertz) at the high end of the Input "
          "Frequency Range 2 of this Power Supply. A value of 0 "
          "implies DC."), 
       Units ( "Hertz" ), 
       MappingStrings { "MIF.DMTF|Power Supply|004.20" }]
   uint32 Range2InputFrequencyHigh;

      [Description (
          "ActiveInputVoltage indicates which input voltage range is "
          "currently in use. Range 1, 2, or both can be specified "
          "using the values 3, 4, or 5, respectively. If the Supply is "
          "not currently drawing power, the value 6 (\"Neither\") can "
          "be specified. This information is necessary in the case of "
          "a UPS, a subclass of PowerSupply."), 
       ValueMap { "1", "2", "3", "4", "5", "6" }, 
       Values { "Other", "Unknown", "Range 1", "Range 2", "Both",
          "Neither" }, 
       MappingStrings { "MIF.DMTF|Power Supply|004.15" }]
   uint16 ActiveInputVoltage;

      [Description (
          "TypeOfRangeSwitching describes the kind of input voltage "
          "range switching that is implemented in this PowerSupply. "
          "For example, autoswitching can be specified (value=4)."), 
       ValueMap { "1", "2", "3", "4", "5", "6" }, 
       Values { "Other", "Unknown", "Manual", "Autoswitch",
          "Wide Range", "Not Applicable" }, 
       MappingStrings { "MIF.DMTF|Power Supply|004.16" }]
   uint16 TypeOfRangeSwitching;

      [Description (
          "Represents the total output power of the PowerSupply in "
          "milliWatts. 0 denotes 'unknown'."), 
       Units ( "MilliWatts" ), 
       MappingStrings { "MIF.DMTF|Power Supply|004.21" }]
   uint32 TotalOutputPower;
};