cim_ethernetport.mof

Pegasus is an open-source implementationof the DMTF CIM and WBEM standards. It is designed to be por

// Copyright (c) 2005 DMTF.  All rights reserved.
// <change cr="CIMCoreCR00752.000" type ="change">Update of
// descriptions based on Tech Edit review.</
// <change cr="ArchCR00066.004" type="add">Add UmlPackagePath
// qualifier values to CIM Schema.</change>
// ==================================================================
//  CIM_EthernetPort
// ==================================================================
   [UMLPackagePath ( "CIM::Device::Ports" ), Version ( "2.10.0" ), 
    Description (
       "Capabilities and management of an EthernetPort.")]
class CIM_EthernetPort : CIM_NetworkPort {

      [Override ( "PortType" ), Description (
          "The specific mode that is currently enabled for the Port. "
          "When set to 1 (\"Other\"), the related property "
          "OtherPortType contains a string description of the type of "
          "port."), 
       ValueMap { "0", "1", "50", "51", "52", "53", "54", "55", "56",
          "100", "101", "102", "103", "104", "105", "106", "107",
          "108", "109", "110", "111", "16000..65535" }, 
       Values { "Unknown", "Other", 
          //50 Copper         
          "10BaseT", "10-100BaseT", "100BaseT", "1000BaseT",
          "2500BaseT", "10GBaseT", "10GBase-CX4", 
          //100 Fiber         
          "100Base-FX", "100Base-SX", "1000Base-SX", "1000Base-LX",
          "1000Base-CX", "10GBase-SR", "10GBase-SW", "10GBase-LX4",
          "10GBase-LR", "10GBase-LW", "10GBase-ER", "10GBase-EW",
          "Vendor Reserved" }]
   uint16 PortType;

      [Override ( "NetworkAddresses" ), Description (
          "Ethernet/802.3 MAC addresses formatted as twelve "
          "hexadecimal digits (for example, \"010203040506\"), with "
          "each pair representing one of the six octets of the MAC "
          "address in \"canonical\" bit order. (Therefore, the Group "
          "address bit is found in the low order bit of the first "
          "character of the string.)")]
   string NetworkAddresses[];

      [Description (
          "The maximum size of the INFO (non-MAC) field that will be "
          "received or transmitted."), 
       MappingStrings { "MIB.IETF|BRIDGE-MIB.dot1dTpPortMaxInfo" }]
   uint32 MaxDataSize;

      [Description (
          "Capabilities of the EthernetPort. For example, the Device "
          "might support AlertOnLan, WakeOnLan, Load Balancing, or "
          "FailOver. If failover or load balancing capabilities are "
          "listed, a SpareGroup (failover) or ExtraCapacityGroup (load "
          "balancing) should also be defined to completely describe "
          "the capability."), 
       ValueMap { "0", "1", "2", "3", "4", "5" }, 
       Values { "Unknown", "Other", "AlertOnLan", "WakeOnLan",
          "FailOver", "LoadBalancing" }, ArrayType ( "Indexed" ), 
       ModelCorrespondence { "CIM_EthernetPort.CapabilityDescriptions" 
          }]
   uint16 Capabilities[];

      [Description (
          "An array of free-form strings that provides more detailed "
          "explanations for any of the EthernetPort features that are "
          "indicated in the Capabilities array. Note, each entry of "
          "this array is related to the entry in the Capabilities "
          "array that is located at the same index."), 
       ArrayType ( "Indexed" ), 
       ModelCorrespondence { "CIM_EthernetPort.Capabilities" }]
   string CapabilityDescriptions[];

      [Description (
          "Specifies which capabilities are enabled from the list of "
          "all supported ones, which are defined in the Capabilities "
          "array."), 
       ValueMap { "0", "1", "2", "3", "4", "5" }, 
       Values { "Unknown", "Other", "AlertOnLan", "WakeOnLan",
          "FailOver", "LoadBalancing" }, ArrayType ( "Indexed" ), 
       ModelCorrespondence { "CIM_EthernetPort.Capabilities",
          "CIM_EthernetPort.OtherEnabledCapabilities" }]
   uint16 EnabledCapabilities[];

      [Description (
          "An array of free-form strings that provides more detailed "
          "explanations for any of the enabled capabilities that are "
          "specified as 'Other'."), 
       ArrayType ( "Indexed" ), 
       ModelCorrespondence { "CIM_EthernetPort.EnabledCapabilities" }]
   string OtherEnabledCapabilities[];
};