cim_fcadaptereventcounters.mof

Pegasus is an open-source implementationof the DMTF CIM and WBEM standards. It is designed to be por

// Copyright (c) 2005 DMTF.  All rights reserved.
// <change cr="CIMCoreCR00751.003" type ="change">Update of
// descriptions based on Tech Edit review.</
// <change cr="ArchCR00066.004" type="add">Add UmlPackagePath
// qualifier values to CIM Schema.</change>
// ==================================================================
//  CIM_FCAdapterEventCounters
// ==================================================================
   [Deprecated { "CIM_FCPortStatistics" },
       UMLPackagePath ( "CIM::Device::NetworkAdapter" ),
       Version ( "2.10.0" ), Description (
       "Note: The use of the FCAdapterEventCounters class is "
       "deprecated because FibreChannelAdapter is deprecated. "
       "FCPortStatistics should be used instead, but it redefines the "
       "level at which data is collected. Therefore, there is no "
       "direct translation of the individual counters between the two "
       "classes. This object describes event counters that were "
       "specific to a FibreChannelAdapter.")]
class CIM_FCAdapterEventCounters : CIM_DeviceStatisticalInformation {

      [Deprecated { "No value" }, Description (
          "Note: The use of this method has been deprecated. \n"
          "Deprecated description: The number of Abort sequence frames "
          "received."), 
       Counter]
   uint64 ABTSFramesReceived;

      [Deprecated { "No value" }, Description (
          "Note: The use of this method has been deprecated. \n"
          "Deprecated description: The number of Abort sequence frames "
          "sent."), 
       Counter]
   uint64 ABTSFramesSent;

      [Deprecated { "No value" }, Description (
          "Note: The use of this method has been deprecated. \n"
          "Deprecated description: The number of frames busied by the "
          "Fabric."), 
       Counter]
   uint64 FBSYsReceived;

      [Deprecated { "No value" }, Description (
          "Note: The use of this method has been deprecated. \n"
          "Deprecated description: The number of frames busied by the "
          "receiving Node."), 
       Counter]
   uint64 PBSYsReceived;

      [Deprecated { "No value" }, Description (
          "Note: The use of this method has been deprecated. \n"
          "Deprecated description: The number of frames busied by the "
          "Adapter itself."), 
       Counter]
   uint64 PBSYsSent;

      [Deprecated { "No value" }, Description (
          "Note: The use of this method has been deprecated. \n"
          "Deprecated description: The number of frames rejected by "
          "the Fabric."), 
       Counter]
   uint64 FRJTsReceived;

      [Deprecated { "No value" }, Description (
          "Note: The use of this method has been deprecated. \n"
          "Deprecated description: The number of frames rejected by "
          "the receiving Node."), 
       Counter]
   uint64 PRJTsReceived;

      [Deprecated { "No value" }, Description (
          "Note: The use of this method has been deprecated. \n"
          "Deprecated description: The number of frames rejected by "
          "the Adapter itself."), 
       Counter]
   uint64 PRJTsSent;

      [Deprecated { "No value" }, Description (
          "Note: The use of this method has been deprecated. \n"
          "Deprecated description: The number of PRLI frames sent "
          "where the response was LS_RJT."), 
       Counter]
   uint64 PRLIsRejected;

      [Deprecated { "No value" }, Description (
          "Note: The use of this method has been deprecated. \n"
          "Deprecated description: The number of PRLO frames sent "
          "where the response was LS_RJT."), 
       Counter]
   uint64 PRLOsRejected;

      [Deprecated { "No value" }, Description (
          "Note: The use of this method has been deprecated. \n"
          "Deprecated description: The number of Abort sequence frames "
          "sent where the response was BA_RJT."), 
       Counter]
   uint64 ABTSFramesRejected;

      [Deprecated { "CIM_FCPortStatistics.ResetSelectedStats()" }, 
       Description (
          "Note: The use of this method has been deprecated. \n"
          "Deprecated description: Method to reset the Adapter event "
          "counters. The method takes, as input, an integer that "
          "indicates which counter to reset. For this input 0 "
          "indicates all and 1 through 11 indicate a reset of the "
          "individual counters. The method returns 0 if successful, 1 "
          "if not supported, and any other value if an error occurred. "
          "A method is specified so that the instrumentation of the "
          "Device, which tabulates the errors and warnings, can also "
          "reset its internal processing and counters. \n"
          "In a subclass, the set of possible return codes could be "
          "specified, using a ValueMap qualifier on the method. The "
          "strings to which the ValueMap contents are 'translated' can "
          "also be specified in the subclass as a Values array "
          "qualifier.")]
   uint32 ResetCounter ( 
         [IN, Description (
             "The counter to reset."), 
          ValueMap { "0", "1", "2", "3", "4", "5", "6", "7", "8", "9",
             "10", "11" }, 
          Values { "All", "ABTSFramesReceived", "ABTSFramesSent",
             "FBSYReceived", "PBSYReceived", "PBSYSent",
             "FRJTReceived", "PRJTReceived", "PRJTSent",
             "PRLIRejected", "PRLORejected", "ABTSFramesRejected" }]
      uint16 SelectedCounter); 
};