cim_potsmodem.mof

Pegasus is an open-source implementationof the DMTF CIM and WBEM standards. It is designed to be por

// Copyright (c) 2005 DMTF.  All rights reserved.
// <change cr="CIMCoreCR00752.000" type ="change">Update of
// descriptions based on Tech Edit review.</
// <change cr="ArchCR00066.004" type="add">Add UmlPackagePath
// qualifier values to CIM Schema.</change>
// ==================================================================
//  CIM_POTSModem
// ==================================================================
   [UMLPackagePath ( "CIM::Device::Modems" ), Version ( "2.10.0" ), 
    Description (
       "The POTSModem class represents a Device that translates binary "
       "data into wave modulations for sound-based transmission. It "
       "connects to the POTS (Plain Old Telephone System) network.")]
class CIM_POTSModem : CIM_CallBasedModem {

      [Description (
          "Capabilities of the POTSModem. For example, the Device "
          "might support distinctive ring, caller ID, fax, voice, and "
          "so on."), 
       ValueMap { "0", "1", "2", "3", "4", "5", "6", "7", "8", "9",
          "10", "11", "12" }, 
       Values { "Unknown", "Other", "Distinctive Ring", "Caller ID",
          "Voice", "Fax Class 1", "Fax Class 2", "WakeOnRing",
          "Fax Group 3", "GSM Support", "AMPS Support", "OOB Alerting",
          "Worldwide Country Support" }, ArrayType ( "Indexed" ), 
       ModelCorrespondence { "CIM_POTSModem.CapabilityDescriptions" }]
   uint16 Capabilities[];

      [Description (
          "An array of free-form strings that provides more detailed "
          "explanations for any of the POTSModem features indicated in "
          "the Capabilities array. Note, each entry of this array is "
          "related to the entry in the Capabilities array that is "
          "located at the same index."), 
       ArrayType ( "Indexed" ), 
       ModelCorrespondence { "CIM_POTSModem.Capabilities" }]
   string CapabilityDescriptions[];

      [Description (
          "Specifies which capabilities from the list of those "
          "supported are enabled and defined in the Capabilities "
          "array."), 
       ValueMap { "0", "1", "2", "3", "4", "5", "6", "7", "8", "9",
          "10", "11", "12" }, 
       Values { "Unknown", "Other", "Distinctive Ring", "Caller ID",
          "Voice", "Fax Class 1", "Fax Class 2", "WakeOnRing",
          "Fax Group 3", "GSM Support", "AMPS Support", "OOB Alerting",
          "Worldwide Country Support" }, 
       ModelCorrespondence { "CIM_POTSModem.Capabilities" }]
   uint16 EnabledCapabilities[];

      [Description (
          "Defines the maximum communication speed to the COM Port for "
          "an external modem that can be set. Enter 0 if not "
          "applicable."), 
       Units ( "Bits per Second" )]
   uint32 MaxBaudRateToSerialPort;

      [Description (
          "Defines the maximum communication speed for accessing the "
          "phone system that can be set."), 
       Units ( "Bits per Second" )]
   uint32 MaxBaudRateToPhone;

      [Description (
          "Boolean that indicates that synchronous, as well as "
          "asynchronous, communication is supported.")]
   boolean SupportsSynchronousConnect;

      [Description (
          "DialType is an integer that indicates whether tone "
          "(value=1) or pulse dialing (value=2) is used. \"Unknown\" "
          "(0) can also be defined."), 
       ValueMap { "0", "1", "2" }, 
       Values { "Unknown", "Tone", "Pulse" }]
   uint16 DialType;

      [Description (
          "InactivityTimeout defines the time limit (in seconds) for "
          "automatic disconnection of the phone line, if no data is "
          "exchanged. A value of 0 indicates that this feature is "
          "present but not enabled."), 
       Units ( "Seconds" )]
   uint32 InactivityTimeout;

      [Description (
          "Describes the volume level of the audible tones from the "
          "Modem. For example, high, medium, or low volume can be "
          "reported (values 3, 4, or 5, respectively)."), 
       ValueMap { "0", "1", "2", "3", "4", "5", "6", "7" }, 
       Values { "Unknown", "Other", "Not Supported", "High", "Medium",
          "Low", "Off", "Auto" }]
   uint16 SpeakerVolumeInfo;

      [Description (
          "CountriesSupported is an array of strings that defines the "
          "countries in which the POTSModem operates."), 
       MaxLen ( 64 )]
   string CountriesSupported[];

      [Description (
          "CountrySelected is a string value that defines the country "
          "for which the Modem is currently programmed. When multiple "
          "countries are supported, this property defines which one is "
          "currently selected for use."), 
       MaxLen ( 64 )]
   string CountrySelected;

      [Description (
          "Number of rings before the Modem answers an incoming call.")]
   uint8 RingsBeforeAnswer;

      [Description (
          "MaxNumberOfPasswords specifies the number of passwords that "
          "can be defined in the Modem itself. If this feature is not "
          "supported, enter 0.")]
   uint16 MaxNumberOfPasswords;

      [Description (
          "CurrentPasswords is an array that contains the currently "
          "defined passwords for the Modem. This array might be left "
          "blank for security reasons."), 
       MaxLen ( 24 )]
   string CurrentPasswords[];

      [Description (
          "Indication of whether the Modem supports call-back.")]
   boolean SupportsCallback;

      [Description (
          "AnswerMode defines the current auto-answer or call-back "
          "setting for the Modem."), 
       ValueMap { "0", "1", "2", "3", "4", "5" }, 
       Values { "Unknown", "Other", "Disabled", "Manual Answer",
          "Auto Answer", "Auto Answer with Call-Back" }]
   uint16 AnswerMode;

      [Description (
          "The current equalization setting for the Modem."), 
       ValueMap { "0", "1", "2", "3" }, 
       Values { "Unknown", "Other", "Long", "Short" }]
   uint16 Equalization;

      [Description (
          "List of black-listed numbers for the Modem.")]
   string BlackListedNumbers[];
};